When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I need the pipe work between the Turbo nipple and Boost Control Solenoid\Actuator - Should be some small pipe with the restrictor pill in it which T's off to the BCS
Also be interested in the 3 port Boost solenoid
I need the pipe work between the Turbo nipple and Boost Control Solenoid\Actuator - Should be some small pipe with the restrictor pill in it which T's off to the BCS
I have that (from a MY99). The pill is defo in there. Is this the MY pill/vac hose section you need?
Did you need any other vac pipework?
Originally Posted by jr758774c
IAlso be interested in the 3 port Boost solenoid
If you intend to fit a 3-port anyway, then it has a different sized pill in the bleed vac hose attached to its bottom port anyway! Were you aware of this?
Or did you need the 2-port pill as well, as a remedial temporary fix, regardless?
Last edited by joz8968; 27 November 2010 at 07:54 PM.
I didn't know that I need the pill and pipe work for the 2 port solenoid for the moment, but I'm looking at getting my ecutec remapped soon and thought a 3 port would be helpful. How much for the 2 port pipewok and the 3 port with pipeworj
I didn't know that I need the pill and pipe work for the 2 port solenoid for the moment, but I'm looking at getting my ecutec remapped soon and thought a 3 port would be helpful. How much for the 2 port pipewok and the 3 port with pipeworj
I don't have a 3-port.
I do happen to have a replacement 2-port (from a MY99), though. Or failing that, I can just send you that section of vac pipe with the pill in (and any other vac pipes, if needed...).
Just let me know what you want...
(OP, sorry, I hadn't intended to spam over your thread - just offereing a helping hand to a fellow member in need. Hope you're cool with this? )
Last edited by joz8968; 27 November 2010 at 10:05 PM.