Hybrid Front Mount Intercoolers.
26 November 2010, 05:55 AM
#31
Scooby Newbie
Join Date: Oct 2010
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
The GT2 is supplied as a complete kit with silicon joiners, clamps, brackets, instructions etc. We do not supply houses. 
If it is for M/Y 99-00 you may also want a flange adaptor to reuse your existing BOV. Price is on post#1.
There are a number of fitting threads on this site but the kit comes with instructions.
You must cut the bumper for the core to fit.
Delivery Sweden, Norway, Finland, Denmark is not a problem and there are many happy Scandinavian customers already.
I need your postal address, model and year to harveysmith1@btopenworld.com to confirm shipping price.
Payment via Paypal or Bank Transfer.
If it is for M/Y 99-00 you may also want a flange adaptor to reuse your existing BOV. Price is on post#1.There are a number of fitting threads on this site but the kit comes with instructions.
You must cut the bumper for the core to fit.
Delivery Sweden, Norway, Finland, Denmark is not a problem and there are many happy Scandinavian customers already.
I need your postal address, model and year to harveysmith1@btopenworld.com to confirm shipping price.
Payment via Paypal or Bank Transfer.
Best regards
Daniel
10 December 2010, 08:13 AM
#36
The Monster is no longer made as far as I know and there is no need for it. It was a bar and plate and not particularly efficient so the slightly smaller GT and GT2 offer better thermal performance even although they are slightly smaller.
Are you sure you specifically want a Monster? I can check old stock if you want.
Are you sure you specifically want a Monster? I can check old stock if you want.
19 February 2011, 11:20 AM
#47
The New Age comes with its own cold air kit so you lose the airbox and the air filter is located in the inner wing driver's side. However, if you are going beyond 400 bhp it is unlikely you will get a big enough filter in the inner wing and will therefore modify the cold air kit supplied with the kit to take a large cone.
19 February 2011, 05:56 PM
#48
Scooby Regular
iTrader: (1)
Join Date: Dec 2009
Location: Dublin, Ireland
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
in relation to the powder coating, i was looking at a FMIC for my legacy and supplier said that the powder coating helps reduce temperatures:
Whatever one i ended up buying i wanted to get it coated black so its more stealthy under the bonnet, i thought it could only aid with the cooling effort
Thermal Dispersement- This coating on an intercooler will lower the overall temperature by 18-20%. It works by eliminating the hot spots! All radiators and intercoolers have hot spots. This coating is a satin black in color and is a wet application that is baked in.
Ceramic Satin Black thermal coating- This is an air cure flat/semi satin black color. This material handles heat up to 3000 degrees. By having such a high heat factor this makes for internal temperatures to stay much cooler by keeping the hot air out of a tube. This coating is widely used in the Harley motorcycle market for there exhaust to make the outside temperatures much lower and keep the heat in the pipes.
Ceramic Satin Black thermal coating- This is an air cure flat/semi satin black color. This material handles heat up to 3000 degrees. By having such a high heat factor this makes for internal temperatures to stay much cooler by keeping the hot air out of a tube. This coating is widely used in the Harley motorcycle market for there exhaust to make the outside temperatures much lower and keep the heat in the pipes.
21 February 2011, 12:06 PM
#49
in relation to the powder coating, i was looking at a FMIC for my legacy and supplier said that the powder coating helps reduce temperatures:
Whatever one i ended up buying i wanted to get it coated black so its more stealthy under the bonnet, i thought it could only aid with the cooling effort
Whatever one i ended up buying i wanted to get it coated black so its more stealthy under the bonnet, i thought it could only aid with the cooling effort
Poweder coating is a thermal barrier and reduces the ability of the fins and tubes to disipate heat which is their purpose.
).
17 March 2011, 08:27 PM
#60
Scooby Regular
iTrader: (11)
Join Date: Feb 2010
Location: Bristol
Posts: 1,215
Likes: 0
Received 0 Likes
on
0 Posts
Hey Harvey...
am interested in a 99-00 kit GT2 for my classic.... but one question can i keep my foglights? i have chenged them to be hella p1 items and don't really want too have to remove them...
many thanks
Tom
am interested in a 99-00 kit GT2 for my classic.... but one question can i keep my foglights? i have chenged them to be hella p1 items and don't really want too have to remove them...
many thanks
Tom