Yes it has the oval cutout mate. It just clips in place from the front but I decided to take the grill off to make it easier and then decided to remove the old mesh too. It just clips in mate.

 

Has anyone had any `issues` fitting the lower one? I thought from the pics I`ve seen that the lower grill sat parallel to the aperture. When I fitted mine, each end pulls in, effectively bending the whole grill. Also, the middle of the grill seems too high to fit between the bodywork????? It`s almost as though it should have another clip in the middle!

 

Which version do you have?

I've bought the full size bottom one and it has 3 pegs running underneath, one in the middle and one either side.. So you should have something in the middle?

 

DHL just dropped mine of, its for a Blobeye, full size lower, mine has 3 pegs too..one either side and one in the middle...

 

I bought the standard bottom. It has 2short clips at the top and 2 long ones at the bottom. Like yours though, it seems like it should have a middle clip to `pull it in tight`!!

 

Does it look like one is missing/snapped off??

 

Nothing looks broken. Maybe there should be another clip in the middle at the bottom instead of the short flat clippy thing. Just need someone to confirm theirs is different.

 

Im struggling with the lower wr1 full grill too ...
Have to force bumper inrto shape but grill wont then sit flush level etc all the way round...
Mick

 

double post

 

I have no idea. Sorry, I won't be fitting mine yet! Although these fitting problems worry me

 

Does the grill seem bigger than the aperture (in the middle) to you?

 

it is bigger having to force it but this isnt helping for a nice flush fit

 

I got the same one, just fitted it...
maby give the grill alittle bend with your hands, dont force the bumper...
It will fit in the space with alittle encouragement, i had the drill ready and put in a 1mm pilot hole in the 2 either side of the number plate bracket first.
Then encourgaed it in and screwed it place, not tight.
Then dealt with the outter 2..then tightened all the screws down....
Look great, although i did mange to chip some clear coat off round the drill holes... But can bearly see it...lol..

 

Just had a thought, and it's how mines ended up...it isnt a flush finish..

There is a bulge outside of the hole, this looks like the total fitment.

I'll take a pic of mine before the sun goes down as well...

 

It shouldn`t need `bending` or `encouraging`. I thought they were supposed to be a spot on fit. Mine`s miles out for a good fit

 

fitted myn now not all flush or in line but looks ace and gives fmic protection.
Fitted top with ties 2x where no plate holes are and 2x in each corner and thankfully are invisable just about
mick

 

Pics?

 

fitted myn now not all flush or in line but looks ace and gives fmic protection.
Fitted top with ties 2x where no plate holes are and 2x in each corner and thankfully are invisable just about
mick

 

Just a few quick shots before the light dies...sorry for the car bing dirty..lol

 

ive taken some just cant upload them ill try again hang on mate

 

look excelent dont they ....

 

Mine`s the smaller standard version to yours. There`s no way to fit any extra fixings or get it to fit the hole.....

 

Yeah they do...lol......and feels all the better with a discount...lol

 

That does suck mate, maby a call to zunsport tech dept. Would be a step in the right direction...
I know how frustrating it can be to find something not fitting totally correct, how ever much you want it too...

 

Mine never arrived

 

got mine today, fitted in about 10 mins, upper a and half lower for blob eye. it was a tight fit found it easier to fit the lower one first with the top grill completly off, stuck my hand down the back to give the lower grill a help in making sure all clips go in the right place, then fitted the top grill after job done and looks great.

 

Did yours have any clips in the centre?

 

no, mine is exactly the same as yours, to start with i was thinking that it was the wrong size but with a little push here and there it slipped in. tight fit but thats how you want it. i did bend all the bottom clips up as far as they would go with out braking them, clipped the top two in then the bottom ones, as i said before i got to the botton ones by putting my hand down the back of the bumper as my top grill was off.

 

Ok, I`ll have another go when I get a minute mate.

Hang on, you bent the securing clips up or the 3 flat ones?

 

i bent all 5 bottom ones, once in place secure the two clips from the back with your hand, then i used a screw driver to push the 3 in the middle flat.