2.1 10sec DIY Drag Monster..
#33
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2006
Location: Elstree
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Heads have been built / ported / machined by my mate who has been porting and running a engineering shop for over 10years, the block has been machined and prepared by Lateral, I'll be assembling the short motor / long engine myself under the supervision of my mate who built my heads, everything else on the car will be done by myself bar the mapping which will be done by Paul at zen
Last edited by 786omar; 20 July 2010 at 10:03 PM.
#41
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2006
Location: Elstree
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Some pics of the heavily ported heads, supertech valves lapped in, valve seats 3 angle cut, JUN valve springs and retainers fitted and all shimmed up to suit the piper 276 cams....
#44
Scooby Regular
iTrader: (23)
Omar spec list looks good and the teaser pics very nice. Good luck with the build mate i'm sure you wont need it though
Lol Clive your not the only one i have 2 spare CDBs + 3rd CDB is built and awaiting me to finish the head work and just bolt it up. Probably keep the other 2 as pension funding lol.
Lol Clive your not the only one i have 2 spare CDBs + 3rd CDB is built and awaiting me to finish the head work and just bolt it up. Probably keep the other 2 as pension funding lol.
Last edited by STI_Baly; 24 July 2010 at 08:00 PM.
#45
Scooby Regular
iTrader: (55)
Omar spec list looks good and the teaser pics very nice. Good luck with the build mate i'm sure you wont need it though
Lol Clive your not the only one i have 2 spare CDBs + 3rd CDB is built and awaiting me to finish the head work and just bolt it up. Probably keep the other 2 as pension funding lol.
Lol Clive your not the only one i have 2 spare CDBs + 3rd CDB is built and awaiting me to finish the head work and just bolt it up. Probably keep the other 2 as pension funding lol.
#46
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2006
Location: Elstree
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Omar spec list looks good and the teaser pics very nice. Good luck with the build mate i'm sure you wont need it though
Lol Clive your not the only one i have 2 spare CDBs + 3rd CDB is built and awaiting me to finish the head work and just bolt it up. Probably keep the other 2 as pension funding lol.
Lol Clive your not the only one i have 2 spare CDBs + 3rd CDB is built and awaiting me to finish the head work and just bolt it up. Probably keep the other 2 as pension funding lol.
Bally, would you have a spare set of bolts that hold the two block halfs together that I could buy off you?
#48
Scooby Regular
iTrader: (23)
Have you tried Mattybr5? hes on here too....send him a PM and just let him know that i put him in the frame to look for a set.
Will also have a rummage for you tomorrow mate if i get a chance as i usually get in quite late from work.
#51
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2006
Location: Elstree
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
An update on the build guys, ..look what I just bought - a complete mint Sti4 Type R Rolling shell less running gear shes even got TAX and MOT :P It will save alot of time as its pretty much ready for me to drop the running gear in to
#54
Scooby Regular
iTrader: (8)
Join Date: Jul 2005
Location: Now with added 2.1 jun/cosworth power
Posts: 998
Likes: 0
Received 0 Likes
on
0 Posts
Very nice spec list omar should be an animal when finished, iv still not got the rods and pistons in the block yet (i bought the crower rods and cp pistons from you couple months back).
Will be keeping track of this thread mate, keep up the good work
Will be keeping track of this thread mate, keep up the good work
#57
Scooby Regular
iTrader: (31)
Nice thread Omar..
How come you have started from scratch again after building the last 2.1stroker?? Which incidently has just completed its first full trackday and didnt miss a beat!! with just the addition of coilovers, whiteline bars, links and ALK and a front brake change to Ksports.
How come you have started from scratch again after building the last 2.1stroker?? Which incidently has just completed its first full trackday and didnt miss a beat!! with just the addition of coilovers, whiteline bars, links and ALK and a front brake change to Ksports.
#58
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2006
Location: Elstree
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Nice thread Omar..
How come you have started from scratch again after building the last 2.1stroker?? Which incidently has just completed its first full trackday and didnt miss a beat!! with just the addition of coilovers, whiteline bars, links and ALK and a front brake change to Ksports.
How come you have started from scratch again after building the last 2.1stroker?? Which incidently has just completed its first full trackday and didnt miss a beat!! with just the addition of coilovers, whiteline bars, links and ALK and a front brake change to Ksports.
After selling the car I went over to a RX7 and then a Soarer, but they were no match to the Type R you now own so I felt the need to build another but this time doing as much of the work myself, it's abit boring handing your money over to someone and letting them build your car for you...So I thought I'd give it ago myself
Any recent pics of the car or videos of it on track?
Last edited by 786omar; 07 August 2010 at 06:52 PM.
#59
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Oct 2006
Location: Elstree
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
Long block is now finally assembled I'll get some pics up during the week of the assembly process, in the meantime thought I'd post a pic up of the wheels that I collected from Ruislip tyres a few weeks back