350 / 350 was about 2.4k , minimum lag although thats on a 2.5 sti, not sure if its available for the 2.0 blob.

 

OOPS (BLOBEYE) Apologies I was refering to a hawkeye ,put it down to age .Speak to tracktive anyway as the web site states 01 - 07 sti s.

 

Yeah, the motor and turbo is standard 2lt. The TSL 333 package use my Prodrive exhaust, added a Green high flow air-filter and changed the y piece under the intercooler for some silicone item.

Might just add a MD321H and get it over with, if i can get 350lbs/ft out of that without changing my exhaust its a done deal. Still have to search the forum a bit, might be a better turbo available. Nothing straight forward you know!

 

the 321T is a better turbo mate! It realy isn't easy to get over 350ft/lbs on a 2Ltr, I suspect you will need mroe than just the turbo

 

This is all getting too much now, i read the T is better suited for 2.5 motors. I have 330lbs/ft now at 3600rpm, if the 321H is good for 360 to 380bhp you really think it is not going to give me about 20lbs/ft?

These UK cars are crap. Just a remap on a JDM will see about 350.

 

I could be wrong.... I'm not convinced there is goign to be much difference in spool up time between the T and the H (might be a little but but not a lot) especially with some of the stuff the mappers are capable of now, they are very good at what they do and will generally give you what you need, if low spool up is key then they will aim for this for you and generally give good results.

Top kudos to the mappers really!

I'm sure someone with a better knowledge than me wil lcome along soon enough and correct me

 

Cheers Stealth, this seems to be a bit harder than i thought. I reckon i need to give myself a few weeks to find out more.

 

Really?