2010 SuperHIDS HID/Xenon Conversion Kits Group Buy!
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Shipment arrived today, so will be sending out the remaining orders today 
LED's have not arrived and I won't hold the orders waiting for them
The LEDs will all be refunded.
Refunds/discounts will be processed at the same time as the orders are processed.

LED's have not arrived and I won't hold the orders waiting for them
The LEDs will all be refunded.Refunds/discounts will be processed at the same time as the orders are processed.
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
7 GB orders out the door (Royal Mail 1st Class Recorded). Receptionist worked late bless her franking them all. 
H7 4300k bulbs were a no show, so will chase them up and get them out beginning of next week. That leaves 3 outstanding.
After every SuperHIDs Group Buy I'm always muttering "never again"
As way of thanking you in participating in the GB and your patience, you'll be given a discount code worth £12.99 for free delivery on your next order. It will be PM'd to you when you leave iTrader feedback
H7 4300k bulbs were a no show, so will chase them up and get them out beginning of next week. That leaves 3 outstanding.
After every SuperHIDs Group Buy I'm always muttering "never again"

As way of thanking you in participating in the GB and your patience, you'll be given a discount code worth £12.99 for free delivery on your next order. It will be PM'd to you when you leave iTrader feedback
hey bob ive just fitted my kit but the main bulb which is housed in a circular thing wont close because of the wires
any info on this
steve
any info on this
steve
Last edited by stevemoir; Feb 27, 2010 at 02:49 PM. Reason: change of problem
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Hi James,
Keep the ballasts and send the bulbs and wiring harness back.
Aztec Performance Ltd
Devonshire Business Centre
Works Road
Letchworth Garden City
Hertfordshire
SG6 1GJ
TEL: 01462 488244
I will check the bulb availability in the morning, if they are in stock they will go straight out, if we have to order them they will be a couple of days extra.
Cheers,
Bob
Keep the ballasts and send the bulbs and wiring harness back.
Aztec Performance Ltd
Devonshire Business Centre
Works Road
Letchworth Garden City
Hertfordshire
SG6 1GJ
TEL: 01462 488244
I will check the bulb availability in the morning, if they are in stock they will go straight out, if we have to order them they will be a couple of days extra.
Cheers,
Bob
okay thats the bulbs and cables packaged up ready to be sent will get them to post office tomorrow and sent recorded.
hopefully you have in stock as i cant wait to get the lights on now.
thanks for help Bob this is a prime example of why companys like you should be used.
James
hopefully you have in stock as i cant wait to get the lights on now.
thanks for help Bob this is a prime example of why companys like you should be used.
James
Scooby Regular
iTrader: (18)
Joined: May 2006
Posts: 3,420
Likes: 2
From: Middx / Herts / Bucks / Essex
Hi Bob,
My bro is after a set of HID's for his Fiesta ST... I believe they're H4 bulbs.
Do the H4 HID's that you're doing have the appropriate wiring for his Fiesta??
Thanks
Alex
My bro is after a set of HID's for his Fiesta ST... I believe they're H4 bulbs.
Do the H4 HID's that you're doing have the appropriate wiring for his Fiesta??
Thanks
Alex
Scooby Regular
iTrader: (18)
Joined: May 2006
Posts: 3,420
Likes: 2
From: Middx / Herts / Bucks / Essex
Ahhh right umm... not sure Bob... I thought H4 bulbs were dual beam (dips and full)? He's got an 02-05 ST and I checked online and it says H4.
I'll have to double check with him and get back to you
But would they be plug and play on his Fiesta or would a bit of re-wiring be necessary?
I'll have to double check with him and get back to you
But would they be plug and play on his Fiesta or would a bit of re-wiring be necessary?
Hi Bob
When do you reckon you will be sending my lights you where waiting for the 6000k bulbs ! have they turned up yet ! i phoned you last week and paid over phone !
Many Thanks Wr1 woza !
When do you reckon you will be sending my lights you where waiting for the 6000k bulbs ! have they turned up yet ! i phoned you last week and paid over phone !
Many Thanks Wr1 woza !
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Hi Alex: H4 bulbs come in both single beam and dual beam fitments. Dual beam kits come with a wiring harness - the only part of the cars wiring that it connects to the bulb plug and battery. Straight forward to install. 
Woza: Haven't run your order through the system yet, but will do tomorrow (I knew there was an outstanding HID order somewhere).
Woza: Haven't run your order through the system yet, but will do tomorrow (I knew there was an outstanding HID order somewhere).
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
All paid for orders are now complete and out the door (1st Class Recorded). What a PITA with the deliveries, but at least it's all done now 
Don't forget, I will send out free delivery codes to all that participated in the GB as way of thankyou as soon as you have left iTrader feedback
Am getting onto the remaining refunds etc now.
Thanks all
Don't forget, I will send out free delivery codes to all that participated in the GB as way of thankyou as soon as you have left iTrader feedback

Am getting onto the remaining refunds etc now.
Thanks all
Scooby Regular
iTrader: (18)
Joined: May 2006
Posts: 3,420
Likes: 2
From: Middx / Herts / Bucks / Essex
All paid for orders are now complete and out the door (1st Class Recorded). What a PITA with the deliveries, but at least it's all done now 
Don't forget, I will send out free delivery codes to all that participated in the GB as way of thankyou as soon as you have left iTrader feedback
Am getting onto the remaining refunds etc now.
Thanks all
Don't forget, I will send out free delivery codes to all that participated in the GB as way of thankyou as soon as you have left iTrader feedback

Am getting onto the remaining refunds etc now.
Thanks all
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
All refunds now processed accordingly. Any queries, email me on aztecperformance@gmail.com 
Alex: The highest colour/temp we have ever sold is 8000k which are in stock. Can put them on the next GB if your mate really wants 10k, but I don't recommend them.

Alex: The highest colour/temp we have ever sold is 8000k which are in stock. Can put them on the next GB if your mate really wants 10k, but I don't recommend them.
Bob, i searched high and low for LED sidelights with a bayonet fitment for my 02 WRX Prodrive lights but i've had no luck as all the sidelights i've found are spade fitment for later models.
the other idea i've had is trying to change the sidelight loom/holder so i can fit spade fitment ones.
as you might be able to tell i really want to get rid of my yellowy sidelights.
the other idea i've had is trying to change the sidelight loom/holder so i can fit spade fitment ones.
as you might be able to tell i really want to get rid of my yellowy sidelights.


