Can anyone tell me what gauges match the colour and font of the standard classic dash? I want to get some gauges to keep an eye on the engine but they MUST be OEM looking.

 

Here are some pictures of the Defi BF 60mm gauges - boost, oil temperature, oil pressure and coolant temperature fitted to my S202.

The 3 gauge pod is an ATi and the single pod was purchased from Area 52 and then cut out to suit the 60mm gauge as they come blank.

Unilluminated





Illuminated

 

here are my gauges

 

That single pod came out well.

 

Thanks again Rich for cutting the hole about for me.

 

heres mine prosport in a pillar pods

 

gauges in my hatch.

 

No, that is defi white racer series.

 

wheres a good place to buy these ati triple pods quite a few people have?

i want one for my upcoming gauges

 

were did you get your triple pillar pod from m8, i have looked all over the net for one.

thanx

 

yeh how much was the pillar pod buddy?

 

were did you get your triple pillar pod from m8, i have looked all over the net for one.

hi mate i got off ebay from america it sits onto of the standard one not a great fit but looks good when all gauges are in think it was about £30 ish

 

yeh how much was the pillar pod buddy?


think it was about £30 ish off ebay from america took about a week to come

 

was it from this guy??????????????

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT


thanx


scott

 

was it from this guy??????????????

http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT


thanx


scott
yeh thats the 1 couldn`t find the transaction to find there name

 

cool m8, i'll look about more over the net but that's the only one i found, if cant find any more i'll get from that usa guy.

thanx again


Scott

 

 

here is my effort

 

[quote=monkeyboy173;9114470]Heres mine. Defi Oil Press, Oil Temp, Boost & Knock Link in a triple pod. Then Defi Water Temp in the air vent & Stack Wideband Lambda in a pod.



]Hi, how did you get that water temp gauge to hold in the vent ? Is it a 52 or 60mm gauge ? And was it a nightmare to fit ? Looks sound mate.

 

Two things in life are so true......

No. 1



No. 2

 

Fitted my custom pod today as well, sit's the same height as the clock pod.

 

My set-up in my '96 wrx, The centre pod is home built before you all ask, Painted at a local paint shop gel coated and finished in satin black, Shiftlight is from GLOWSHIFT in usa, Gauges are from R-spec they are there 60mm stepmotor peak/warning series with audiable alert, you can aso set your own warning levels, as norm they black out when off with open and close ceramony,

hope you like,

 

I just thought I would mention for those people who may be looking through this thread for some inspiration after purchasing gauges in the recent group buy, that I tried this colour yesterday and it really doesn't match the colour of the dash centre console . Its far to light, Now im sanding it down again . I guess i'l have to take out the cup holder and take it in to colour match it.

 

got the same gauges myself mate ....got 2 more to fit

 

https://www.scoobynet.com/members-ga...a-hawkeye.html

 

I does match my hawkeye dash. Could be that the blobeye dash was a slightly different colour so worth taking note of if you have a blob. Also worth doing a test first on another peice of plastic, wait till its dry to check you are happy. Additionally, mine is about to be taken out and replaced by an ATI pod, which is what I should have done in the first place as the fit and finish of these is shocking. Mine has warped in the heat!.

 

Autogauge Oil Temp, oil Pressure and Volt Gauges



Blitz Mirror Drive Boost Gauge and Knock link built into dial surround.

 

liking the knocklink

 

Here's mine. Prosport steppers, in white/blue but can be changed to orange by me using my dimmer on the lights

Interested in installing a knocklink too

 

looking for a gauge pod for a bugeye if anyone can help (point me in the right direction)