SuperHIDs HID/XENON Conversion Kits - £30 OFF!
yeah but there like half the price I could get 2 sets one for me headlights and one for me driving lights.....
The ballasts look very very similar.....where are your kits produced?
Import duty and tax is gonna be 25.5% tops if you get hit it with it........most of the time you don't.....thats gonna take it to like 68 buns......
Sure you take a punt if you buy it from ebay but there are some uk sellers with similar prices....I just picked that one coz it was the cheapest....
I'm not having a pop or owt its not to everyones taste but for me 2 kits for the price of one is no brainer.....
The ballasts look very very similar.....where are your kits produced?
Import duty and tax is gonna be 25.5% tops if you get hit it with it........most of the time you don't.....thats gonna take it to like 68 buns......
Sure you take a punt if you buy it from ebay but there are some uk sellers with similar prices....I just picked that one coz it was the cheapest....
I'm not having a pop or owt its not to everyones taste but for me 2 kits for the price of one is no brainer.....
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
£68 + clearing charge, for a different product from Chinese supplier, something you may as well bin if it goes wrong (due to return postage costs) or buy one of our quality tried a tested SuperHID kits, with a 18 month warranty, aftersales support and next day spares.
You pays your money and takes your chances
You won't find our kits anywhere on ebay.
You pays your money and takes your chances

You won't find our kits anywhere on ebay.
bob have you had any trouble with the super bright LED side lights?
i bought some back in June with some hids, one has melted into the plastic bit/body where the wires are and blown and the other has started to melt but still works, the bulbs have put brown burn marks on the actual bulb holders as well.
i bought some back in June with some hids, one has melted into the plastic bit/body where the wires are and blown and the other has started to melt but still works, the bulbs have put brown burn marks on the actual bulb holders as well.
One of the bulbs is quite badly deformed due to heat damage. I can photograph them if you like
From a Chinese supplier?.....you got to give ebay guys a fair crack of the whip, you can't slate there stuff when all you come back with is ours is better........
Yours probably come from China i bet and if not somewhere in the far east.....
Who's are your made by then? and where are they made?
like i say yours look very similar with the thin plastic silver case that they all seem to be selling now.......I bet there are not many factories making these........
Yours probably come from China i bet and if not somewhere in the far east.....
Who's are your made by then? and where are they made?
like i say yours look very similar with the thin plastic silver case that they all seem to be selling now.......I bet there are not many factories making these........
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Sorry I completely missed this.
Email me the pics to aztecperformance@gmail.com
Not had any problems with any others and we've sold a fair few now and I've have them fitted to my own too. Would be very strange for 2 to be faulty on the same car and may underline some other issue. Will sort it out via email though
Bob
I'm interested in getting HIDs for my 2004 STI, but I would want them for dipped and main beam so does this mean I would need two kits (one with H1 and one with 9005)? Is this feasible or is there just not enough space for two sets of ballasts?
Mike
I'm interested in getting HIDs for my 2004 STI, but I would want them for dipped and main beam so does this mean I would need two kits (one with H1 and one with 9005)? Is this feasible or is there just not enough space for two sets of ballasts?
Mike
Last edited by scud8; Oct 6, 2009 at 06:57 PM.
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Hi Mike,
Yes, you would need two kits. Quite a few people fit 2 kits. There is plenty of room as 2 of our SuperHID ballasts are smaller than one normal ballast

I will check the stock levels on the kits and update tomorrow. Can always put them in with your current order to save on delivery costs
Yes, you would need two kits. Quite a few people fit 2 kits. There is plenty of room as 2 of our SuperHID ballasts are smaller than one normal ballast

I will check the stock levels on the kits and update tomorrow. Can always put them in with your current order to save on delivery costs
Bob
Don't worry - I've just been reading the DfT guidance and relevant ECE regulations so I'm having second thoughts (it's sad how I spend my evenings). I want to do a big more digging before I commit myself, which won't happen quickly.
Mike
Don't worry - I've just been reading the DfT guidance and relevant ECE regulations so I'm having second thoughts (it's sad how I spend my evenings). I want to do a big more digging before I commit myself, which won't happen quickly.
Mike
Last edited by scud8; Oct 6, 2009 at 08:14 PM.
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Mike: I wouldn't pay too much attention to it, of the hundreds of kits we have sold over the years they have all passed MOTs and nobody has had any problems with the law.

Current stocks:
H1 - 4300k and 8000k in stock
9005 - 4300k and 6000k in stock
H4- 4300k, 6000k and 8000k in stock
H7 - sold out
We are quite light on stock, so first come first served.
Ready to dispatch.
Order online AZTEC PERFORMANCE ONLINE STORE - WHOLESALE PRICES DIRECT TO THE PUBLIC
Use the following discount code for the GB prices (-£20 + FREE LED sidelights): SCOOBYNET274
Current stocks:
H1 - 4300k and 8000k in stock
9005 - 4300k and 6000k in stock
H4- 4300k, 6000k and 8000k in stock
H7 - sold out
We are quite light on stock, so first come first served.
Ready to dispatch.
Order online AZTEC PERFORMANCE ONLINE STORE - WHOLESALE PRICES DIRECT TO THE PUBLIC
Use the following discount code for the GB prices (-£20 + FREE LED sidelights): SCOOBYNET274
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Minimum number of participants is 5. Just add your name to the list and copy/paste:
(USERNAME/PAID)
1. Drift_King - H1 4300k
2. cyrusgod H4 6000k Dual Beam
3. simon 57 HI 4300k dipped. STI bugeye.
4.beanys 05 wrx H1 4300k - PAID
5.
(USERNAME/PAID)
1. Drift_King - H1 4300k
2. cyrusgod H4 6000k Dual Beam
3. simon 57 HI 4300k dipped. STI bugeye.
4.beanys 05 wrx H1 4300k - PAID
5.
Minimum number of participants is 5. Just add your name to the list and copy/paste:
(USERNAME/PAID)
1. Drift_King - H1 4300k
2. cyrusgod H4 6000k Dual Beam
3. simon 57 HI 4300k dipped. STI bugeye.
4.beanys 05 wrx H1 4300k - PAID
5. subarura500 H4 6000k dual beam
(USERNAME/PAID)
1. Drift_King - H1 4300k
2. cyrusgod H4 6000k Dual Beam
3. simon 57 HI 4300k dipped. STI bugeye.
4.beanys 05 wrx H1 4300k - PAID
5. subarura500 H4 6000k dual beam
Thread Starter
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
Minimum number of participants is 5. Just add your name to the list and copy/paste:
(USERNAME/PAID)
1. Drift_King - H1 4300k
2. cyrusgod H4 6000k Dual Beam
3. simon 57 HI 4300k dipped. STI bugeye.
4.beanys 05 wrx H1 4300k - PAID
5. subarura500 H4 6000k dual beam
6. yorkyturbo H4 6000k Dual Beam-PAID
(USERNAME/PAID)
1. Drift_King - H1 4300k
2. cyrusgod H4 6000k Dual Beam
3. simon 57 HI 4300k dipped. STI bugeye.
4.beanys 05 wrx H1 4300k - PAID
5. subarura500 H4 6000k dual beam
6. yorkyturbo H4 6000k Dual Beam-PAID
hi just bught some second hand morette headlights for my bugeye wrx and they have 2 bulbs with 2 prongs and my plug fits a h4 3 prong can any one tell me if i need one of these kits so i can fit them or can i just wire them in some how thanks hope someone can help me on here


