MikeCardiff

iTrader: (2)

Its had something happen on the back drivers corner - the top line of the boot above the light looks OK, but the gaps under the plastic infill and bumper, and where the corner of the boot meets the infill are off.

It could be something as simple as just a badly fitted infill and bumper or slightly bent bumper iron as they can be fiddly to line everything up if they are replaced, but it could equally be a badly repaired rear end smash.

As someone else mentioned, check the boot floor isnt creased, and if possible get the wheel alignment checked at the back.

Probably isnt anything major from the pics as they arent that much out, but worth looking at anyway.

300bhp/ton

Thanks.

Sounds like a good idea, although I guess I'd like to buy a car that I can use rather than buy a car that needs £200+ of monitoring equipment required to then see if I need to buy something else.... lol

timmy2take

iTrader: (7)

I wouldn't say you need one unless your going for quite a tuned engine. Certain Boost Controllers have them built I believe in as well as the Power FC ecu & Commander and probably others.