It is electronic and can only be fitted in conjunction with the SE boost controller (£150) as an add on. The boost controller provides very accurate boost control and has already made significant improvements on several Apexi Power FC installations that we have fitted recently.

 

A week ago I had a Hybrid FMIC and other bits fitted by Harvey and Darren, and here's a hearty recommendation for anyone considering the same.

Whilst the jobs were being done we (my partner and I) had legendary hospitality from Harvey and Dawn. Many thanks for that

The FMIC fitting went absolutely to plan, very neatly done and great value. Charge temperatures are now round-about ambient which, as anyone with a charge temperature gauge on a classic will know, is a fundamental improvement over the topmount. Re-mapping is yet to be done but there's no noticeable lag, perhaps due to the other modification done at the same time.

That other mod is one that Harvey is perhaps best known for: ported/wrapped headers. These have had a great effect on low/mid urge, with the engine feeling more willing, smoother, and slightly quieter. Feels like a different engine, and longer term I reckon it'll make it easier to live with - it just feels a lot nicer when you're driving around off boost. Again, highly recommended

Andy

ps. get your orders in before the lousy exchange rate forces prices up!

 

Let me have your results when you get it mapped

 

hi Harvey,

Jap import 94 GC8 Sti Ver 1..any fmic left? should I, in your own opinion also change the turbo, the injectors, fuel pump, induction filter and re-map..job done then

cheers

Wayne

 

Wayne, I have intercooler kits in stock ready to send out but as to what you should be doing with your car, I do not know. It obviously depends on what you want to achieve and on what you have already done.
I need more information and suggest you email me harveysmith1@btopenworld.com Let me know where you are at now and where you want to end up.
Normally the first mod on these cars is a good exhaust with a 3" open neck downpipe and no cats. This is usually done at the same time as fitting a fuel pump (£75) and the next mod would be ported headers and matched uppipe. After that you might want to increase boost slightly and look at a front mount or you may want to go for a mappable ECU.
Let me know what you want to achieve by email and I will see what I can do to help you.

 

Very tempted, sent you a mail Harvey

Thanks Paul

 

All details sent.

 

Thanks

 

Harvey, do you have a shop, or do you work from home?

 

I dont have a shop but we have a garage and I work from home.
E-mail me, per profile, with what you want and we can meet.

 

Hi Harvey,

I have a P1, would just like to know the price all in including fitting, powder coating on a front mount?

Cheers,

Dan.

 

FMIC kit is £350. Fitting £180. Add £40 for powder coating. This assumes you already have some sort of cone filter system. If you want to reuse your flange mounted BOV already on your TMIC add £22.50 or bring your own BOV or I can supply you a new Forge, for instance, £100.

 

bttt.///

 

bttt.///

 

Keep this open eh. Im saving up

free bttt

 

yep same here, im waiting to pay for my bc coilovers then buying clutch and fly wheel from Dave @ API so wont have the money just yet but if you can keep this open for a month or 2 i shall be seeing you mate

Cheers
Anthony R

 

Me too.

Intend on booking a couple of days off in Darlington for harvey to fit a Hybrid and IK sometime soon... then 350+bhp WILL be mine soon enough, oh yes it will!

 

As it stands everything is stable so this can continue to run and I am already contracted to my next delivery for early June.

 

wiked.

 

SUPER

 

SMASHING

 

Great

 

"...Fine. And Bully's special priiiiize!..."

 

 

bttt.///

 

Groupbuy still on? Need a FMIC for a classic sti with bov flange.
Price delivered please
Thanks Ryan

 

Hi same here

 

See below from page 1.
BOV flange adaptor is £22.50 self colour stainless steel and £26.50 powder coated blue.
All Classic kits are TUBE & FIN not bar and plate.
There is a new kit out released this week for Classics. GT2 £375.
Everything available for next day delivery.
Fitting here for all Hybrid kits Classic and New Age is £180.

GT FMICs COMPLETE £350 : GDB £375.

Hybrid GT + GDB FMIC kits from extensive stocks held in Darlington, for Classic Subarus, MY 93-00, New Age 01 > with extras. Delivery and Paypal at additional cost.

Price Includes :

* Pipe clamps - Not Jubilee type clips supplied with lesser kits.
* Additonal silicon joiner for BOV spiggot connection not included in other kits including Hybrid.
* Comprehensive packing list.
* Comprehensive instructions.
* Full Technical plus Product backup from someone who has sold and fitted these kits for six years.
* HYBRID PREMIUM DEALER & INSTALLER.

ADDITIONAL COST OPTIONS AT TIME OF PURCHASE.

* Add 3.5% for Paypal.
* Overnight delivery £12.50.
* Saturday delivery by arrangement.
* Flange adaptors for re-use of OE BOV MY99-00.
(Flange adaptors also available MY01>) Add £22.50.
* Additonal silicon joiner for GT kit and 2 no. pipe clamps. This allows cutting the hard pipe near the screen wash bottle. This articulation makes fitting easier/neater particularly on MY93-96. Add £13.50.
* Powder coated pipework. Blue, Red, Black, Green, Silver etc. (No Tartan). Adds 5-7 days. Add £40.00 for GC8 or £50 for GDB.
* Stone Chip application. The hard pipes are aluminium and subject to weather attack, particularly from road salt during Winter. The 2 pipes most affected are the bottom sections of the feeds to and from the core. You can protect these yourself or I will apply Stone Guard to the two relevant pipe sections. (Add 1 day to delivery) Add £12.00.
* Replacement cores and hard pipes for accident damaged items. All from stock held in Darlington.

Same day fitting service in Darlington. Inclusive of all sundries. Can fit your induction kit if required. From £180.

ALL kits in stock for next day delivery.

Hybrid RX Boost Controllers. A quality electronic boost controller and FCD combined for not much more than the cost of a manual valve and less than the cost of a fuel cut defender. In cabin adjustment. Attractive control unit. For cars with 2 port boost solenoids. £100.

Hybrid SE Boost Controllers with stand alone 3 port boost solenoid. Another quality product which will improve in gear accelleration and boost control. Easy installation and attractive control unit. Great value for money.
£150.00.

All available for next day delivery

harveysmith1@btopenworld.com

 

What's this then?!

An updated and improved full FMIC kit based on the original "GT Spec"?

Cheers.

 

hi harvey,
looking for a fmic for my 05 sti!!!!
i have an aps CAIK fitted with the crinkle red piping same as the inlet manifold...can you supply the same type of piping obviously at additional cost??
APS can provide it but shipping from US is expensive!!
not keen on the powercoated look!!!

thanks