Hi,

Yes, these are in stock

Order via the GB payments link below:

ScoobyNet Group Buy Specials - HIDs (Xenon) Lighting Kits + RAYS Lightweight Wheel Nuts + Brakes

 

Hi Jim,

Yes

 

Folks.
Sorry to hijack the thread,but can anyone fitting their kit to a bugeye with morettes,let me know what their experience has been-ease of fitting for a novice,what kit you bought,MOT issues,scatter problems etc...
BOB5-youre right mate,too many arguments posting elsewhere-just want the facts!
Ta -H

 

Hey, been looking for a set of HID's but I'm not sure on the fitment, I have a MY95 classic with morettes running both dipped and main beam off one lamp, so will that be dual beam? Also is it true that you need washer jets if your running HID's?

Cheers.

Jay.

 

I have just fitted the kit to Classic Morettes, Just waiting for it to get dark now, Installation is very easy,
I just have one question to Bob or anyone who knows,
whats the best way to get the H2 (morette hi beam light) to work?
Your left with the driver side H4 plug not into anything.
I put the H4 bulb back into it and the Morette hi came on,
So do i just need to link the connectors in the plug??

Thanks.

 

PM'd

 

Hi Jay,

You'll need a H4-Bi kit which will do both dipped and main beam as HID.

Available in 6000k and 8000k colour/temps (4300k sold out).

Order via the payments page setup for SN GBs:

ScoobyNet Group Buy Specials - HIDs (Xenon) Lighting Kits + RAYS Lightweight Wheel Nuts + Brakes

Cheers,

Bob

 

this might be a daft question but is one kit for both headlights or do i need two kits?

cheers
yorkie

 

One kit does both sides

 

Thank you for the reply! Looking at the 6000k kit, won't have the cash till after March the 14th since i'm on Holiday and need to get the car serviced first, but will be getting a dual beam 6000k kit + rays blue wheel nuts at the same time.

Top reply and very helpful.

Cheers.

Jay.

 

will i need anything else ie need to change headlight glass or does the scatter of the glass not affect them. i have an sti3 classic standard lights.

cheers
Adam

 

Will work fine as a direct replacement for your old candle halogens

 

We've just sold a bunch of these to a trader, so only have very limited stocks remaining.

A new GB will start in the next couple of weeks, but prices will reflect the 30%+ drop in the £ vs $.

Bag the current remaining stocks at the old rates while you can

 

hi bob
which kit do i need for my bugeye sti 2002 uk main beam.so i can order them.
cheers

 

It should be 9005/HB3, but there are a few different bulb configurations on the bugeye.

There is literally one 9005/HB3 kit left on the shelf and it's in 6000k colour/temp.

 

So can you get a classic H4, without the dual beam, in case you just want to use the morettes H2 for full beam?

 

Hi,

Just want to say thanks to Bob, my HID kit had a problem, I sent it back and he sorted it out and it is now on the car and much better than any bulbs.

So thanks Bob, I hope to buy from you again.

David

 

Just ordered a set of H4 - Dual 6000k for my P1

Thanks

 

We've sold lots of these that have been fitted to morettes. You can still use the H2/Inner for main beam as well as the Bi-H4 (=more light )

GB is closing on Monday 2nd Feb at noon.

 

Finally put my hand in my pocket and ordered an H7 kit for my morettes.

 

 

*GB is closing on Monday 2nd Feb at noon*

 

GB now closed

 

NO NON NO i just cam on to see the details for ordering dipped beam for my 05 blobeye gutted whats the price now Bob?

 

Hi Bob,

Do you recommend not bothering with the relay harness then? (...does the classic scoob harness already have relay(s)?).

Was going to fit ballast underneath the lamp but a bit concerned that water can pool there slightly when it's very wet - surely they need to be kept dry?

Andy

 

Hi Andy,

If your kit is the standard H4 fitment for the classic it will include a wiring harness with a relay. This is needed to control the dipped and main beam.

Ballasts are completely waterproof, although it's best to fit electrical components away from water as much as possible.

 

Bob- how much for just two 8k H7 fitment bulbs ?? my kit is the old larger ballast style version, not sure if the bulbs will be any different on the newer ballast versions ??

 

Hi Jono,

Spare bulbs are £18 each + Delivery (£4.95).

In stock and ready for dispatch.

Send me your email address for payment link.


Cheers,

Bob

 

Hi Bob, only just seen this GB!! Bugger.......how much would it cost now to order a full kit for 04 blob eye?

Cheers

Gaz