New Godspeed Brakes group buy
Hi Ian,
I am looking into buying some gold brembo's to go onto my 2001 wrx, i am sure i read somewhere on your group buy that i will need different pads on the rear?? does this apply to mine and can i ask why??
many thanks
Nickb
It would be nice to have pics of the various brake parts you sell??
May be after grooved discs
I am looking into buying some gold brembo's to go onto my 2001 wrx, i am sure i read somewhere on your group buy that i will need different pads on the rear?? does this apply to mine and can i ask why??
many thanks
Nickb
It would be nice to have pics of the various brake parts you sell??
May be after grooved discs
Scooby Regular
iTrader: (1)
Joined: Dec 2001
Posts: 7,327
Likes: 0
From: You only live ONCE But if you do it right >>>>> ONCE is enough
Hi Ian,
I am looking into buying some gold brembo's to go onto my 2001 wrx, i am sure i read somewhere on your group buy that i will need different pads on the rear?? does this apply to mine and can i ask why??
many thanks
Nickb
It would be nice to have pics of the various brake parts you sell??
May be after grooved discs
I am looking into buying some gold brembo's to go onto my 2001 wrx, i am sure i read somewhere on your group buy that i will need different pads on the rear?? does this apply to mine and can i ask why??
many thanks
Nickb
It would be nice to have pics of the various brake parts you sell??
May be after grooved discs
Godspeed Motorsport Home Page
email on it's way Ian.
Last edited by FLAT ERIC; Aug 25, 2009 at 10:37 AM.
Big thanks to Ian and the gang at Godspeed for supply and fit of the 330mm/4 pot AP's today! They look the mutts nuts and I can't wait to get them bedded in and try them out properly.
Thanks again.
Thanks again.
Thread Starter
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
Hi Benji554
Nice to meet you , here are the before and after pics , enjoy
Not looking too good !
Thats much better
ready for the drive home
Have fun with them
Cheers Ian
Nice to meet you , here are the before and after pics , enjoy
Not looking too good !
Thats much better
ready for the drive home
Have fun with them
Cheers Ian
Thread Starter
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
Scooby Regular
iTrader: (1)
Joined: Dec 2001
Posts: 7,327
Likes: 0
From: You only live ONCE But if you do it right >>>>> ONCE is enough
Hi,
Interested in a few of your options for my MY99 STI V5.
I am living in Japan at the moment so I presume you can do VAT free? Would like to know delivery cost to Japan for the brake kit though.
Can I confirm these VATless prices I worked out from this thread - PM me if you prefer.
AP 4 POT - £760
AP 6 POT - £1062
335 CONVERSION KIT - £467
I realise the prices are being updated so let me know when you can.
Not too keen on the 335 kit as I would imagine a 10 year+ caliper would probably need a refurb then I am in to AP territory.. Also don't like the idea of the mod you have to do to fit them - keen to know how you think they compare to the AP 4 pots though.
Also how easy would it be to get pads/discs for each out here in an emergency. I am not to good at modifying parts myself so would be good to know if one was an "off the shelf" purchase.
Look forward to hearing from you.
Regards,
Ian
Interested in a few of your options for my MY99 STI V5.
I am living in Japan at the moment so I presume you can do VAT free? Would like to know delivery cost to Japan for the brake kit though.
Can I confirm these VATless prices I worked out from this thread - PM me if you prefer.
AP 4 POT - £760
AP 6 POT - £1062
335 CONVERSION KIT - £467
I realise the prices are being updated so let me know when you can.
Not too keen on the 335 kit as I would imagine a 10 year+ caliper would probably need a refurb then I am in to AP territory.. Also don't like the idea of the mod you have to do to fit them - keen to know how you think they compare to the AP 4 pots though.
Also how easy would it be to get pads/discs for each out here in an emergency. I am not to good at modifying parts myself so would be good to know if one was an "off the shelf" purchase.
Look forward to hearing from you.
Regards,
Ian
Scooby Regular
Joined: Nov 2008
Posts: 43
Likes: 0
Hi Ian,
Can you let me know if you have updated prices for the front 2 piece disks and rear disks to suit brembo calipers with 5x100 PCD disks? Would also like prices on ds2500 pads for the front and rear.
Thanks
Can you let me know if you have updated prices for the front 2 piece disks and rear disks to suit brembo calipers with 5x100 PCD disks? Would also like prices on ds2500 pads for the front and rear.
Thanks
Scooby Regular
Joined: Mar 2003
Posts: 120
Likes: 0
AP 6 POT - £1062
Is this price just for the kit without fitting, or is that the price for just calipers and pads without disks?
will these fit onto the 335mm disks you are making?
If so can you give me a price just to upgrade to the AP 6 pot calipers only as I already have the disks
If I fit the AP 6 pots on the front I would like to transfer the standard subaru 4 pot calipers to the rear with maybe the vented kit that you have on offer. Can this be done as the handbrake mechanism goes through the rear brakes on a classic.
tgt
Is this price just for the kit without fitting, or is that the price for just calipers and pads without disks?
will these fit onto the 335mm disks you are making?
If so can you give me a price just to upgrade to the AP 6 pot calipers only as I already have the disks
If I fit the AP 6 pots on the front I would like to transfer the standard subaru 4 pot calipers to the rear with maybe the vented kit that you have on offer. Can this be done as the handbrake mechanism goes through the rear brakes on a classic.
tgt
Last edited by topguntone; Sep 14, 2009 at 02:30 PM.
Scooby Regular
Joined: Apr 2012
Posts: 144
Likes: 0
From: essex
Following on from the popular group buy I ran in May , I am offering similar deals for the next month , the pads have gone up slightly as I have had increases on the 1st July.
I can supply discs for any Impreza or Legacy , if your model isn't on the following list please ask.
All our discs come grooved as standard , I will only offer drilled discs as well if you want it for show more than go ! The pads available today can generate so much more heat that drilled discs can end up cracking around the holes , all makes of discs that have been drilled will be prone to this. The thicker the disc the less chance of this happening , moreso on the standard sized discs.
All my discs come with a 12 month guarantee against warping , if its down to faulty discs they would be changed for another pair , but if its down to incorrect fitment , or sticky calipers , then they would not be covered.
I am seeing a lot of Subaru calipers now for reconditioning , so care must be taken when fitting new discs to make sure all pistons are free to move , if not , I can supply any parts needed to put them right , from a bleed nipple , to new seals and stainless steel pistons that dont rust , to fully reconditioned calipers.
Just about all parts are available for next day delivery , somedays I am pushed to send out all orders so would go within 2 days.
If you have any questions please call me on 01656 723060 or email me on ian@godspeedbrakes.co.uk.
Grooved Discs and pad prices.
Classic model
294mm fronts to fit the subaru 4 pots = £89 a pair
266mm rears to fit the 1 pot sliding calipers = £89 a pair
290mm bugeye discs for the 2 pot conversion = £115 a pair
290mm bugeye discs and our rear fitting kit = £150
Type R rear vented discs - 290mm with a 190mm handbrake drum = £130 a
pair
Fitting kit to fit the subaru 2 pot calipers = £49
Fitting kit and handbrake shoes to fit the Brembo 2 pots = £175
Pads per axle set
Ferodo DS2500's £125 a set
--------------------------------------------------------------------------
2001 onwards WRX
294mm fronts = £89 a pair
290mm rears = £109 a pair
Pads per axle set
Ferodo DS2500's £125 a set
--------------------------------------------------------------------------
2001 onwards STi
326mm fronts for the Brembo calipers = £150 a pair
316mm rears for 2 pot brembo calipers = £170 a pair
Our 326mm 2 piece discs and bells £325 a pair
these are available in 5 x 100 and 5 x 114 PCD
Pads per axle set
Ferodo DS2500's £140 a set
--------------------------------------------------------------------------
Godspeed 335mm kit for the Subaru 4 pot calipers , as long as you dont have any sticky pistons in your calipers , this kit is a match for anything the same size , it totally transforms the performance of the standard calipers
Complete 335mm kit with 335mm x 32mm grooved discs and bells , calipers spacer kit , steel mounting bracket kit , Ferodo or Mintex pads ( this kit uses larger than standard pads )
Group buy price £550
replacement 335mm x 32mm discs £275 a pair
--------------------------------------------------------------------------
Reconditioned Subaru 4 pot calipers
We completely strip the calipers , bead blast them , prime and spray them any colour you want , and fit new stainless steel pistons , new seals and bleed nipples .
These are better than new when finished
£195 a pair exchange
--------------------------------------------------------------------------
330mm x 28mm discs and bells to fit the Prodrive Alcon calipers , I can supply these for £375 a pair
-----------------------------------------------------------------------------
330mm x 28mm or 304mm x 28mm discs to replace AP discs £275 a pair
-----------------------------------------------------------------------------
There will be no list to make of who wants what ,, just contact me and order them
Cheers Ian
01656 723060
ian@godspeedbrakes.co.uk
I can supply discs for any Impreza or Legacy , if your model isn't on the following list please ask.
All our discs come grooved as standard , I will only offer drilled discs as well if you want it for show more than go ! The pads available today can generate so much more heat that drilled discs can end up cracking around the holes , all makes of discs that have been drilled will be prone to this. The thicker the disc the less chance of this happening , moreso on the standard sized discs.
All my discs come with a 12 month guarantee against warping , if its down to faulty discs they would be changed for another pair , but if its down to incorrect fitment , or sticky calipers , then they would not be covered.
I am seeing a lot of Subaru calipers now for reconditioning , so care must be taken when fitting new discs to make sure all pistons are free to move , if not , I can supply any parts needed to put them right , from a bleed nipple , to new seals and stainless steel pistons that dont rust , to fully reconditioned calipers.
Just about all parts are available for next day delivery , somedays I am pushed to send out all orders so would go within 2 days.
If you have any questions please call me on 01656 723060 or email me on ian@godspeedbrakes.co.uk.
Grooved Discs and pad prices.
Classic model
294mm fronts to fit the subaru 4 pots = £89 a pair
266mm rears to fit the 1 pot sliding calipers = £89 a pair
290mm bugeye discs for the 2 pot conversion = £115 a pair
290mm bugeye discs and our rear fitting kit = £150
Type R rear vented discs - 290mm with a 190mm handbrake drum = £130 a
pair
Fitting kit to fit the subaru 2 pot calipers = £49
Fitting kit and handbrake shoes to fit the Brembo 2 pots = £175
Pads per axle set
Ferodo DS2500's £125 a set
--------------------------------------------------------------------------
2001 onwards WRX
294mm fronts = £89 a pair
290mm rears = £109 a pair
Pads per axle set
Ferodo DS2500's £125 a set
--------------------------------------------------------------------------
2001 onwards STi
326mm fronts for the Brembo calipers = £150 a pair
316mm rears for 2 pot brembo calipers = £170 a pair
Our 326mm 2 piece discs and bells £325 a pair
these are available in 5 x 100 and 5 x 114 PCD
Pads per axle set
Ferodo DS2500's £140 a set
--------------------------------------------------------------------------
Godspeed 335mm kit for the Subaru 4 pot calipers , as long as you dont have any sticky pistons in your calipers , this kit is a match for anything the same size , it totally transforms the performance of the standard calipers
Complete 335mm kit with 335mm x 32mm grooved discs and bells , calipers spacer kit , steel mounting bracket kit , Ferodo or Mintex pads ( this kit uses larger than standard pads )
Group buy price £550
replacement 335mm x 32mm discs £275 a pair
--------------------------------------------------------------------------
Reconditioned Subaru 4 pot calipers
We completely strip the calipers , bead blast them , prime and spray them any colour you want , and fit new stainless steel pistons , new seals and bleed nipples .
These are better than new when finished
£195 a pair exchange
--------------------------------------------------------------------------
330mm x 28mm discs and bells to fit the Prodrive Alcon calipers , I can supply these for £375 a pair
-----------------------------------------------------------------------------
330mm x 28mm or 304mm x 28mm discs to replace AP discs £275 a pair
-----------------------------------------------------------------------------
There will be no list to make of who wants what ,, just contact me and order them
Cheers Ian
01656 723060
ian@godspeedbrakes.co.uk
Thread Starter
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
You can either push the backplate inwards to make them clear , or take them off , we always take them off when we fit them
Cheers Ian
Scooby Regular
Joined: Apr 2012
Posts: 144
Likes: 0
From: essex
Hi Ian, don't mean to threadcrap, but I haven't been able to get a reply from you via PM's or e-mails.
so here goes:
I'm after a full set of brakes for a 1999 WRX.
Front and Rear discs, as well as carbon kevlar pads all round. Also, your kit with brand new 4 pot brakes sounds very tasty. Would you be able to quote a full price incl everything?
Also, My personal car is in dire need of a brake upgrade, a 355/356mm front kit with 6 pot brakes would be ideal. 2007 WRX is the car in question.
330mm 4 pot AP's or similar would also be a possibility.
If you would be able to quote a price, I'd apprecciate it.
EX VAT would be ideal.
so here goes:
I'm after a full set of brakes for a 1999 WRX.
Front and Rear discs, as well as carbon kevlar pads all round. Also, your kit with brand new 4 pot brakes sounds very tasty. Would you be able to quote a full price incl everything?
Also, My personal car is in dire need of a brake upgrade, a 355/356mm front kit with 6 pot brakes would be ideal. 2007 WRX is the car in question.
330mm 4 pot AP's or similar would also be a possibility.
If you would be able to quote a price, I'd apprecciate it.
EX VAT would be ideal.
Thread Starter
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
Hi Ian, don't mean to threadcrap, but I haven't been able to get a reply from you via PM's or e-mails.
so here goes:
I'm after a full set of brakes for a 1999 WRX.
Front and Rear discs, as well as carbon kevlar pads all round. Also, your kit with brand new 4 pot brakes sounds very tasty. Would you be able to quote a full price incl everything?
Also, My personal car is in dire need of a brake upgrade, a 355/356mm front kit with 6 pot brakes would be ideal. 2007 WRX is the car in question.
330mm 4 pot AP's or similar would also be a possibility.
If you would be able to quote a price, I'd apprecciate it.
EX VAT would be ideal.
so here goes:
I'm after a full set of brakes for a 1999 WRX.
Front and Rear discs, as well as carbon kevlar pads all round. Also, your kit with brand new 4 pot brakes sounds very tasty. Would you be able to quote a full price incl everything?
Also, My personal car is in dire need of a brake upgrade, a 355/356mm front kit with 6 pot brakes would be ideal. 2007 WRX is the car in question.
330mm 4 pot AP's or similar would also be a possibility.
If you would be able to quote a price, I'd apprecciate it.
EX VAT would be ideal.
Yes if you have a vaild VAT number we can supply you the less ex-vat to Finland
Cheers Ian
ian@godsppedbrakes.co.uk
Scooby Regular
Joined: Apr 2012
Posts: 144
Likes: 0
From: essex
[QUOTE=Godspeed Brakes;10632364]The front stone guard is only held on by 3 bolts , fronts are easier to take off[/QUOTE
Hi ian i need front and back brake disc 295mm front and 290mm rear for classic 4 pot and 2 pot conversion could u quote me a price i want drilled and grooved thanks
Hi ian i need front and back brake disc 295mm front and 290mm rear for classic 4 pot and 2 pot conversion could u quote me a price i want drilled and grooved thanks