Our company CDF Racing!
29 July 2008, 06:24 PM
#35
Former Sponsor
Thread Starter
iTrader: (49)
Join Date: Jan 2008
Posts: 3,222
Likes: 0
Received 0 Likes
on
0 Posts
Retail on the air-con pulleys will be £160 (website /ebay etc ) £130 to scoobynet members . There is a bit more involved in these than the standard pulleys as the front needs a steel plate to make it work
Brakes retail for £675 .... Scoobynet members, £640.
------------------------------------------------------------------------
Craig .... to remove your pump... (classic)
1. Undo 6mm bolt in the front.
2 . insert 3 x m5 bolts in the front of the pulley . (You should see three holes there
3. screw them in a bit at a time and the front will start to come off
( they need to be long bolts)
4. remove circlip
5 . pull ... tap the pulley whilst spinning it , should see the pulley gradually move
Brakes retail for £675 .... Scoobynet members, £640.
------------------------------------------------------------------------
Craig .... to remove your pump... (classic)
1. Undo 6mm bolt in the front.
2 . insert 3 x m5 bolts in the front of the pulley . (You should see three holes there
3. screw them in a bit at a time and the front will start to come off
( they need to be long bolts)
4. remove circlip
5 . pull ... tap the pulley whilst spinning it , should see the pulley gradually move
12 August 2008, 11:47 PM
#37
Former Sponsor
Thread Starter
iTrader: (49)
Join Date: Jan 2008
Posts: 3,222
Likes: 0
Received 0 Likes
on
0 Posts
** New sway kits on there way **
We have a set of these on the way for my car ..... look very nice, and it's something a bit different from other brands that don't offer a full kit.
Competition Sway Bar Set 2001+
Hotchkis Tuning Competition Sway bars take performance to the next level. Competition bars offer the same great benefits as our sport sway bars, but use a more aggressive rear bar set to take advantage of race tires, and to achieve slight over steer. Sway bar sets include front and rear bars, end links, greasable bushings, and brackets.
Front 1" (25.4 mm)Hollow +88%
Rear 1" (25.4 mm) Hollow
3 Position Rear +71%, +123%, +200%
Hollow VS Solid Comparison
Front Bar Rate
Hotchkis Hollow Bar = 880 lbs/in.
Solid (7/8") = 725 lbs/in.
Solid (15/16") = 955 lbs/in.
Rear Bar Rate
Hotchkis Hollow Bar = 350 lbs/in.
Solid (15/16") = 300 lbs/in
Hotchkis Sport Suspension - Competition Sway Bar Set
Competition Sway Bar Set 2001+
Hotchkis Tuning Competition Sway bars take performance to the next level. Competition bars offer the same great benefits as our sport sway bars, but use a more aggressive rear bar set to take advantage of race tires, and to achieve slight over steer. Sway bar sets include front and rear bars, end links, greasable bushings, and brackets.
Front 1" (25.4 mm)Hollow +88%
Rear 1" (25.4 mm) Hollow
3 Position Rear +71%, +123%, +200%
Hollow VS Solid Comparison
Front Bar Rate
Hotchkis Hollow Bar = 880 lbs/in.
Solid (7/8") = 725 lbs/in.
Solid (15/16") = 955 lbs/in.
Rear Bar Rate
Hotchkis Hollow Bar = 350 lbs/in.
Solid (15/16") = 300 lbs/in
Hotchkis Sport Suspension - Competition Sway Bar Set
20 August 2008, 09:17 PM
#42
Former Sponsor
Thread Starter
iTrader: (49)
Join Date: Jan 2008
Posts: 3,222
Likes: 0
Received 0 Likes
on
0 Posts
Subaru Impreza GC8/GDA 93-06 Rear Suspension Package now back in stock , these sell like hot cakes everytime we get them in so be quick.
£329 delivered for scoobynet members,
see here until I can take some better pics
Subaru Impreza GC8/GDA 93-06 Rear Suspension Package
£329 delivered for scoobynet members,
see here until I can take some better pics
Subaru Impreza GC8/GDA 93-06 Rear Suspension Package
20 August 2008, 10:21 PM
#43
Hi guys just like to say my son bought a 6 pot xzendo brake package from this guy and they are bang on ,a good deal and work equally as good as my APs.There was a little mix up with the colour but one phone call and we recieved a light weight pully set with no charge....Top man .Iam about to rebuild a p1 engine and will have no doubts with useing chris for any of my parts. Andy
21 August 2008, 05:35 PM
#45
Former Sponsor
Thread Starter
iTrader: (49)
Join Date: Jan 2008
Posts: 3,222
Likes: 0
Received 0 Likes
on
0 Posts
Hi guys just like to say my son bought a 6 pot xzendo brake package from this guy and they are bang on ,a good deal and work equally as good as my APs.There was a little mix up with the colour but one phone call and we recieved a light weight pully set with no charge....Top man .Iam about to rebuild a p1 engine and will have no doubts with useing chris for any of my parts. Andy
Are you guys using the pads that come with them ? I can supply Mintex street pads pretty cheap ...
21 August 2008, 08:24 PM
#49
Hi Chris, Gaz is still using the pads you supplied,they seem tobe holding out quite well.As soon as I know what I need for my engine build I will give you a shout.just need to get my hols out the way and try to fit things in befor christmas.....Andy
22 August 2008, 10:27 AM
#51
Scooby Regular
Join Date: Jul 2000
Location: Glasgow
Posts: 3,040
Likes: 0
Received 0 Likes
on
0 Posts
24 August 2008, 11:38 AM
#53
Former Sponsor
Thread Starter
iTrader: (49)
Join Date: Jan 2008
Posts: 3,222
Likes: 0
Received 0 Likes
on
0 Posts
Banny , those cams we have are v5 on but they have others ,
Take a look here Kelford Cams, Christchurch, New Zealand
Take a look here Kelford Cams, Christchurch, New Zealand
19 September 2008, 07:19 PM
#55
Former Sponsor
Thread Starter
iTrader: (49)
Join Date: Jan 2008
Posts: 3,222
Likes: 0
Received 0 Likes
on
0 Posts
Due to the world wide shortage of Eagle rods we now have Manley performance Rods now in stock !
Manley Performance
Please pm me for prices
Manley Performance
Please pm me for prices
19 September 2008, 11:57 PM
#56
Scooby Regular
Join Date: Apr 2004
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Due to the world wide shortage of Eagle rods we now have Manley performance Rods now in stock !
Manley Performance
Please pm me for prices
Manley Performance
Please pm me for prices
how much u doing the i beam manley rods for
20 September 2008, 12:11 PM
#58
Former Sponsor
Thread Starter
iTrader: (49)
Join Date: Jan 2008
Posts: 3,222
Likes: 0
Received 0 Likes
on
0 Posts
Lightweight Pulleys
As off October 1st our lightweight pulleys will be going up by 10% .
This is due to we now have a few dealers around the country and it is unfair to them if we undercut them . Members price will be £154 per three piece set which is still much lower than other brands
This is due to we now have a few dealers around the country and it is unfair to them if we undercut them . Members price will be £154 per three piece set which is still much lower than other brands
The price change doesn't affect anyone currently named on the group buy
Last edited by CDF Racing; 22 September 2008 at 02:59 PM.
