H-h-h-how MUCH?????
#31
Scooby Regular
iTrader: (2)
Join Date: Apr 2004
Location: Somewhere in Kent, sniffing some V-Power
Posts: 15,029
Likes: 0
Received 0 Likes
on
0 Posts
Apparently Roger Clark Motorsport can do a clutch change (gearbox off) in 3 hours?
#32
Scooby Regular
It IS Gearbox out ....
Or, could it be easier to lift the Engine out to get to the clutch???????? That would leave all the Driveshafts and Prop in situ ....
#33
Scooby Regular
On my Calibra it was a 30minute job ...... a hatch plate came off and the clutch could be replaced - excellent design
#34
Scooby Regular
Join Date: Nov 2005
Location: Lancashire & District Subaru Owners
Posts: 1,335
Likes: 0
Received 0 Likes
on
0 Posts
Any car which was designed to get at the clutch that easily has to indicate they expected to be changing it on a regular basis !
#35
Scooby Regular
Join Date: Apr 2005
Location: Cheshire
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
I bought a new clutch and a lightened fly wheel (both sourced from ebay, bought from companys not individuals) and got my local garage to fit it. Total came to £460.
#36
Scooby Regular
Following that weird line of thought, Subaru will make the Spark Plugs simple to get at as they have to be changed every 2 years ....... yeah, thats happened
#37
Scooby Regular
iTrader: (3)
Join Date: Mar 2004
Location: N.Ireland
Posts: 4,088
Likes: 0
Received 0 Likes
on
0 Posts
You post a lot of crap contradicting people on what they say, so assumed you were taking the pissylewis.
#38
Scooby Regular
Join Date: May 2004
Location: Ascended to the next level
Posts: 7,498
Likes: 0
Received 0 Likes
on
0 Posts
Subaru clutch change is VERY easy. (compared to say, a Mondeo).
THE ENGINE IS NOT REMOVED (if it is, you'll pay twice the labour for doing so)
You spend more time removing and refitting the down pipe and intercooler than doing the actual clutch. 3 hours is about right, so don't let yourself get ripped off beacuse your car is alledgedly "special".
THE ENGINE IS NOT REMOVED (if it is, you'll pay twice the labour for doing so)
You spend more time removing and refitting the down pipe and intercooler than doing the actual clutch. 3 hours is about right, so don't let yourself get ripped off beacuse your car is alledgedly "special".
#41
Scooby Regular
Thread Starter
Join Date: May 2005
Location: Nr Liverpool
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
Christopher Neil in Northwich wanted £675 + VAT (£793.15). I know they deal in lotus and noble aswell as subaru but thats just crazy. No wonder the bird behind the desk had a big grin on her face she must be the highest paid receptionist in the world.
#42
Scooby Regular
Like our lady on reception do we Sir?
Like our polished floor Sir?
Would Sir care to drop his troooosers and bend over the workbench while me and the boyz give you a good seeing to
Anyone who pays these prices need their bumps felt ......
Like our polished floor Sir?
Would Sir care to drop his troooosers and bend over the workbench while me and the boyz give you a good seeing to
Anyone who pays these prices need their bumps felt ......
#44
Former Sponsor
Join Date: Jul 2005
Location: Wellingborough, Northamptonshire
Posts: 2,859
Likes: 0
Received 0 Likes
on
0 Posts
We can do the Exedy sports clutch, fitted, including vat for £550. Make sure you check the VAT when comparing prices. We also stock a range of lightweight billet flywheels in 2 weight ranges for very competitive prices.
We occasionally remove the engine when doing a clutch change, as we will sometimes be doing other work that means extra time removing the engine compared to the box is more than made up.
Paul
We occasionally remove the engine when doing a clutch change, as we will sometimes be doing other work that means extra time removing the engine compared to the box is more than made up.
Paul
#45
Scooby Regular
Would you say it's easier to take Engine out or Gearbox out if you were ONLY doing the Clutch?
Also, I have never, ever needed to do anything to flywheels when I have replaced clutches ............ I cannot think why you would want to replace an undamaged flywheel?
Also, I have never, ever needed to do anything to flywheels when I have replaced clutches ............ I cannot think why you would want to replace an undamaged flywheel?
#48
Scooby Regular
#50
Scooby Regular
Kevlar Clutches actually seem the best for Performance Cars ....
So, I am surprised that 'Organic' Clutches have gained favour with ScoobyNet members?
If a Flywheel is damaged then yes, replace ..................... but I cannot remember the last time I saw a damaged Flywheel ... of course, replacing a Flywheel delivers extra profits.
So, I am surprised that 'Organic' Clutches have gained favour with ScoobyNet members?
If a Flywheel is damaged then yes, replace ..................... but I cannot remember the last time I saw a damaged Flywheel ... of course, replacing a Flywheel delivers extra profits.
#51
Former Sponsor
Join Date: Jul 2005
Location: Wellingborough, Northamptonshire
Posts: 2,859
Likes: 0
Received 0 Likes
on
0 Posts
Pete,
I have never seen a flywheel fracture. However, what we see plenty of is cracking on the surface that runs very deep. Sometime they are okay, but sometimes they have a very uneven surface and need to be skimmed to prevent the clutch being either very juddery or having a foreshortened lifespan. The option of skimming is okay but I wouldn't ever do it without balancing afterwards, and with skimming and balancing you can be looking at the over £100+vat. A new OE flywheel is around £215+vat, but we offer a billet flywheel for just £225. Given the relatively small increase in price, many of our customers opt to go for the billet item, which includes dowels and a new spigot bearing. I would say that 50% of people opt for the new flywheel simply due to the lightweight nature. I have also removed skimmed OE flywheels that have surface cracks and raised portions after 10000 miles, the billet items are more robust in comparison, it might be the non cast material, but perhaps it's because they're thinner and have a more even heat distribution.
Also with noting that some uprated friction materials, in paticular cerametalic paddle clutches can really eat into flywheels, but that's not an issue for most people.
We would always remove the gearbox to do a clutch unless absolutely necessary.
Paul
I have never seen a flywheel fracture. However, what we see plenty of is cracking on the surface that runs very deep. Sometime they are okay, but sometimes they have a very uneven surface and need to be skimmed to prevent the clutch being either very juddery or having a foreshortened lifespan. The option of skimming is okay but I wouldn't ever do it without balancing afterwards, and with skimming and balancing you can be looking at the over £100+vat. A new OE flywheel is around £215+vat, but we offer a billet flywheel for just £225. Given the relatively small increase in price, many of our customers opt to go for the billet item, which includes dowels and a new spigot bearing. I would say that 50% of people opt for the new flywheel simply due to the lightweight nature. I have also removed skimmed OE flywheels that have surface cracks and raised portions after 10000 miles, the billet items are more robust in comparison, it might be the non cast material, but perhaps it's because they're thinner and have a more even heat distribution.
Also with noting that some uprated friction materials, in paticular cerametalic paddle clutches can really eat into flywheels, but that's not an issue for most people.
We would always remove the gearbox to do a clutch unless absolutely necessary.
Paul
Last edited by ZEN Performance; 09 February 2007 at 09:07 PM.