Flamers....
No doesnt damage anything,
Apart from IF you have BIG FLAMES or FLAME alot, you may need to keep your rear BUMPER highly polished, you dont want it getting tarnished!!!
Think you may have the price slighly wrong the pieces to make it cost alot more than you think
Thread Starter
Scooby Regular
Joined: Apr 2005
Posts: 2,264
Likes: 0
From: Basildon, Essex Scoobyless Crew - MX5 Division
Hi Cookie sorry for the delay...
It's probably just a loose connection on one of the wires...
Check all of the wires attached to the coil and also the ht lead at both ends.
it could be that the control box has failed but unlikley, if you able to bring the car to ESB on Saturday morning, I'll be there and I'll take a look for you, I'll have a spare control unit with me so can try another to prove the fault, also meter out the wires to ensure the power is getting to the unit.
Let me know mate
It's probably just a loose connection on one of the wires...
Check all of the wires attached to the coil and also the ht lead at both ends.
it could be that the control box has failed but unlikley, if you able to bring the car to ESB on Saturday morning, I'll be there and I'll take a look for you, I'll have a spare control unit with me so can try another to prove the fault, also meter out the wires to ensure the power is getting to the unit.
Let me know mate
Thread Starter
Scooby Regular
Joined: Apr 2005
Posts: 2,264
Likes: 0
From: Basildon, Essex Scoobyless Crew - MX5 Division
Guys as Paul said the current cost of the kit is £60, I'm looking at ways of reducing the parts cost, so it may drop a little soon....
Included in that cost is FREE fitting if you bring your cars to me.
Fitting tim is 1.5 - 2 hours.
for those further away that want a kit to install yourself, PM me and I'll email you the fitting instructions so you have an Idea in whats involved.
Included in that cost is FREE fitting if you bring your cars to me.
Fitting tim is 1.5 - 2 hours.
for those further away that want a kit to install yourself, PM me and I'll email you the fitting instructions so you have an Idea in whats involved.
Last edited by Mark_B4; Feb 1, 2007 at 09:32 PM.
Check the plug for a spark cookie
, As Mark said wiggle the wires around the coil pack , Sometimes my spare wheel interfeers with mine
Note ~ This may not be stright away on a wet damp evening , But as it gets warm you should see / Hear it buzzing
, As Mark said wiggle the wires around the coil pack , Sometimes my spare wheel interfeers with mine
Note ~ This may not be stright away on a wet damp evening , But as it gets warm you should see / Hear it buzzing
Thread Starter
Scooby Regular
Joined: Apr 2005
Posts: 2,264
Likes: 0
From: Basildon, Essex Scoobyless Crew - MX5 Division
Also cookie, get some tissue and clean the electrodes on the plug, (whilst cold of coarse).
Thread Starter
Scooby Regular
Joined: Apr 2005
Posts: 2,264
Likes: 0
From: Basildon, Essex Scoobyless Crew - MX5 Division
flamers won't work with a recirc DV (in my experience), and I haven't fitted a flamer to a car with a sports cat, so can't comment if it will work or not. I have fitted one to a STI 7, but it was fully decatted
Thread Starter
Scooby Regular
Joined: Apr 2005
Posts: 2,264
Likes: 0
From: Basildon, Essex Scoobyless Crew - MX5 Division
Thread Starter
Scooby Regular
Joined: Apr 2005
Posts: 2,264
Likes: 0
From: Basildon, Essex Scoobyless Crew - MX5 Division



