I have done a fitting guide for newage stoppers ... I would have done one for classsic's aswell But i don't own one,

Im sure Someone will be kind enough to post a guide as soon as they fit there's

These do come with diagrams to help you along but do have chinese writing ,


REMOVE THIS COVER




Now remove the bracket that was holding that cover on- 10mm socket if I remember correctly






Now start to remove the larger bracket holding all the cables in,. Think there are 4 bolts



You will need to disconnect the three cables- press in the clip and pull

When this is done you will need to get yourself a pair of pliars and pinch where the cables are coming through the bracket to release them

Cut this cable tie



Install the new large bracket into the holes where the old bracket was - make sure they are nice and tight



The auctual stopper part for the newage models is the largest m8 screw and a red stopper part. It is fitted onto the end of the bracket and must be lined up with the metal part where the brake fuild goes



You can adjust this to however you like - 1mm cap is recommened,

You can now place the small part you removed from the start into the old holes where the bracket for the cover went - it is up to you if you place the bracket back on for the cover , i have chosen to leave mine off



Reconnect the cables

Use the cables ties in the pack ti tidy everything up




And off you go , you will notice the difference when fitting this bracket - the other small part is not needed , it is just a holder for the small part in photo 11 - it is far too much trouble to remove it from that bracket , ** Please note this is only a guide , if you are not too sure- pop it round your local garage and they will have it fitted in 15 mins for ya

 

lol no1 won

 

Ha my plan to fiddle the lottery worked!!

 

That is unreal !

13 , 17 , 39 , 46 , 47 , 49 , 48 I can't believe no-one had any over those numbers ..


Must mean a rollover for the next GB

 

or wends night draw

 

Yeah thats

 

 

I had 12 which is closest to 13 - do i get it free?

 

Kit arrived this morning (thanks) however unless the Newage kit is different from the Classic i appear to be missing the red stopper:

 

Likewise, but I luckily have a spare one somewhere in the garage.
Will fit it when it's warmer outside

 

Hi Guys ,

The classic kits don't have the red part - see last page of the instructions on the diagram to see how it's stopped ,

chris

 

Chris,

I already have that Kit in my car for the last 2yrs, I thought you had a new one designed.

S!

 

Stalked

Your welcome to send it back .

Chris

 

Case of RTFM then

ala (image from fleabay):

 

Thanks for that guide Chris, i would do mine now but just cant be bothered

 

Mine arrived this morning too, ta muchly

 

Mine hasn't come yet ,but i now have the car to fit it to when it does !!

 

Got mine today

 

Mine came today too

Cheers

 

What is part C (non blue bracket) for in the classic kit? It's referenced in the instructions at the top of pg 2 but not in the actual photos that i can see?

 

Have a look in post #17 .. you can see where it goes there

 

That is the newage kit and the bracket isn't the same in the classic?

 

Yeah sorry mate!

Stand on me!

 

These guys had the same problem ,

They say it just removes the throttle cable out of the way ..

https://www.scoobynet.com/wheels-tyr...=brake+stopper


I will get back to you when I have it confirmed as I dont have a classic it test it on ,


chris

 

cheers, turned up this morning

will the lotto re-draw be tomorrow or sat? (not that i'm gonna win )

 

We are gonna go for it on wednesday ... If nobody gets a number again does it mean I win ?

 

you can put the money towards getting someone to translate those **** awful instructions

 

I do know!

I did write "sorry" on the paperwork - they are all I could find and get photocopies off

 

not having a pop mate. hence the at the end

between them and your pics i'm sure it'll be a doddle