Newage Impreza REMAP Groupbuy
Here are my results.. 2004 S.T.i
How Much do you add on for Flywheel bhp ??
Dyno Test: 02nd-runOEmap
====================
Maximum Wheel Power: 232.2 BHP @ 6205 RPM
Maximum Wheel Torque: 241.6 LbFt @ 3763 RPM
Power to weight ratio: 145.1 BHP per ton
Terminal velocity due to power: 168.2 mph
In Gear Acceleration:
40 - 60mph = 3.0 seconds
50 - 70mph = 2.9 seconds
60 - 80mph = 3.2 seconds
70 - 90mph = 3.7 seconds
80 -100mph = 4.4 seconds
Total Vehicle Mass: 1600kg
Drag Co-efficient: 0.37
Frontal Area: 2.20 square metres
Wheel/Tyre Setup: 225/45/17
Tyre Diameter: 634mm
Tyre Circumference: 1993mm
Engine Rev Limit: 8200
Test gear: 4
Max Speed of gear: 116 mph
Air Intake Temp: 15°C (59°F)
Atmospheric Pressure: 1.00 bar
Dyno Test: postremap
====================
Maximum Wheel Power: 268.5 BHP @ 6057 RPM
Maximum Wheel Torque: 267.9 LbFt @ 4451 RPM
Power to weight ratio: 167.8 BHP per ton
Terminal velocity due to power: 176.6 mph
In Gear Acceleration:
40 - 60mph = 2.8 seconds
50 - 70mph = 2.6 seconds
60 - 80mph = 2.8 seconds
70 - 90mph = 3.1 seconds
80 -100mph = 3.6 seconds
Total Vehicle Mass: 1600kg
Drag Co-efficient: 0.37
Frontal Area: 2.20 square metres
Wheel/Tyre Setup: 225/45/17
Tyre Diameter: 634mm
Tyre Circumference: 1993mm
Engine Rev Limit: 8200
Test gear: 4
Max Speed of gear: 116 mph
Air Intake Temp: 11°C (52°F)
Atmospheric Pressure: 0.23 bar
How Much do you add on for Flywheel bhp ??
Dyno Test: 02nd-runOEmap
====================
Maximum Wheel Power: 232.2 BHP @ 6205 RPM
Maximum Wheel Torque: 241.6 LbFt @ 3763 RPM
Power to weight ratio: 145.1 BHP per ton
Terminal velocity due to power: 168.2 mph
In Gear Acceleration:
40 - 60mph = 3.0 seconds
50 - 70mph = 2.9 seconds
60 - 80mph = 3.2 seconds
70 - 90mph = 3.7 seconds
80 -100mph = 4.4 seconds
Total Vehicle Mass: 1600kg
Drag Co-efficient: 0.37
Frontal Area: 2.20 square metres
Wheel/Tyre Setup: 225/45/17
Tyre Diameter: 634mm
Tyre Circumference: 1993mm
Engine Rev Limit: 8200
Test gear: 4
Max Speed of gear: 116 mph
Air Intake Temp: 15°C (59°F)
Atmospheric Pressure: 1.00 bar
Dyno Test: postremap
====================
Maximum Wheel Power: 268.5 BHP @ 6057 RPM
Maximum Wheel Torque: 267.9 LbFt @ 4451 RPM
Power to weight ratio: 167.8 BHP per ton
Terminal velocity due to power: 176.6 mph
In Gear Acceleration:
40 - 60mph = 2.8 seconds
50 - 70mph = 2.6 seconds
60 - 80mph = 2.8 seconds
70 - 90mph = 3.1 seconds
80 -100mph = 3.6 seconds
Total Vehicle Mass: 1600kg
Drag Co-efficient: 0.37
Frontal Area: 2.20 square metres
Wheel/Tyre Setup: 225/45/17
Tyre Diameter: 634mm
Tyre Circumference: 1993mm
Engine Rev Limit: 8200
Test gear: 4
Max Speed of gear: 116 mph
Air Intake Temp: 11°C (52°F)
Atmospheric Pressure: 0.23 bar
According to the guys from Ecutek when using the DDRD they suggest multiply by 1.23 to get an average flywheel reading - we all know they vary massively depending on the dyno, operator etc etc
at the end of the day its driveability that counts, and my car is massivly different to how it was before the remap, which i guess is all that really matters.....
but I am surprised how good the figures that zak sent me for mine are
but I am surprised how good the figures that zak sent me for mine are
lol, if you didn't tell them it had been mapped then probably good.
if you told them it had been mapped by someone else, they'd give their laptop a little tap and a low figure would pop out, closely followed by a promise of big power if they map it themselves
what a bloody cynic i am today
bluest8, is you car an import hence the 8200 rev limit? if it is, then
nice figures! got many mods on the car to go with the map?
if you told them it had been mapped by someone else, they'd give their laptop a little tap and a low figure would pop out, closely followed by a promise of big power if they map it themselves

what a bloody cynic i am today

bluest8, is you car an import hence the 8200 rev limit? if it is, then
lol, if you didn't tell them it had been mapped then probably good.
if you told them it had been mapped by someone else, they'd give their laptop a little tap and a low figure would pop out, closely followed by a promise of big power if they map it themselves
what a bloody cynic i am today
bluest8, is you car an import hence the 8200 rev limit? if it is, then
nice figures! got many mods on the car to go with the map?
if you told them it had been mapped by someone else, they'd give their laptop a little tap and a low figure would pop out, closely followed by a promise of big power if they map it themselves

what a bloody cynic i am today

bluest8, is you car an import hence the 8200 rev limit? if it is, then
Give Zak a call, mention this thread and see what he says.
THE GROUP BUY PRICE IS VALID TILL THE END OF FEBRUARY.
THIS APPLIES FOR ANY ONE WHO WISHES TO JOIN THE GROUP BUY AND FOR THOSE ALREADY ON THE LIST WHO HAVEN'T YET BOOKED IT IN WITH ZAK.
Booked:~
1. SirFozzalot ~ MY03 STi - BOOKED
2. Cookie ~ MY02 WRX - BOOKED
3. scoobyhurky ~ MY06 WRX - BOOKED
Complete:~
1. Neanderthal ~ MY03 WRX - DONE & HAPPY
2. Evez ~ MY03 WRX - DONE & HAPPY
3. B0DSKI ~ MY03 STi PPP - DONE & HAPPY
4. ice maiden ~ MY04 WRX - DONE & HAPPY
5. Hungrytang ~ MY05 WRX - DONE & HAPPY
6. Budge28 ~ MY03 WRX - DONE & HAPPY
7. bluest8 ~ MY04 JDM STi - DONE & HAPPY
To be booked:~
1. mickyw
2. GMC ~ MY04 STi
3. monotokpoint - TBC
4. Jap imports - TBC
5. Pauld37 ~ MY01 WRX - TBC
Other:~
1. wrxjay03 ~ MY03 WRX - Not done - Fuel Issues
2. Marky9074 ~ Forester STi - Awaiting mapping code
THE GROUP BUY PRICE IS VALID TILL THE END OF FEBRUARY.
THIS APPLIES FOR ANY ONE WHO WISHES TO JOIN THE GROUP BUY AND FOR THOSE ALREADY ON THE LIST WHO HAVEN'T YET BOOKED IT IN WITH ZAK.
1. mickyw
2. GMC ~ MY04 STi
3. monotokpoint - TBC
4. Jap imports - TBC
5. Pauld37 ~ MY01 WRX - TBC
PM sent to all on the above list!
THE GROUP BUY PRICE IS VALID TILL THE END OF FEBRUARY.
THIS APPLIES FOR ANY ONE WHO WISHES TO JOIN THE GROUP BUY AND FOR THOSE ALREADY ON THE LIST WHO HAVEN'T YET BOOKED IT IN WITH ZAK.
1. GMC ~ MY04 STi - TO BE CONFIRMED
2. monotokpoint - TO BE CONFIRMED
3. Jap imports - TO BE CONFIRMED
4. Pauld37 ~ MY01 WRX - TO BE CONFIRMED
THE GROUP BUY PRICE IS VALID TILL THE END OF FEBRUARY.
THIS APPLIES FOR ANY ONE WHO WISHES TO JOIN THE GROUP BUY AND FOR THOSE ALREADY ON THE LIST WHO HAVEN'T YET BOOKED IT IN WITH ZAK.
Booked:~
1. SirFozzalot ~ MY03 STi - BOOKED
2. Cookie ~ MY02 WRX - BOOKED
3. scoobyhurky ~ MY06 WRX - BOOKED
4. Pauld37 ~ MY01 WRX - Booking soon!

Complete:~
1. Neanderthal ~ MY03 WRX - DONE & HAPPY
2. Evez ~ MY03 WRX - DONE & HAPPY
3. B0DSKI ~ MY03 STi PPP - DONE & HAPPY
4. ice maiden ~ MY04 WRX - DONE & HAPPY
5. Hungrytang ~ MY05 WRX - DONE & HAPPY
6. Budge28 ~ MY03 WRX - DONE & HAPPY
7. bluest8 ~ MY04 JDM STi - DONE & HAPPY
To be booked:~
1. GMC ~ MY04 STi - TO BE CONFIRMED
2. monotokpoint - TO BE CONFIRMED
3. Jap imports - TO BE CONFIRMED
Other:~
1. wrxjay03 ~ MY03 WRX - Not done - Fuel Issues
2. Marky9074 ~ Forester STi - Awaiting mapping code
lol, if you didn't tell them it had been mapped then probably good.
if you told them it had been mapped by someone else, they'd give their laptop a little tap and a low figure would pop out, closely followed by a promise of big power if they map it themselves
what a bloody cynic i am today
bluest8, is you car an import hence the 8200 rev limit? if it is, then
nice figures! got many mods on the car to go with the map?
if you told them it had been mapped by someone else, they'd give their laptop a little tap and a low figure would pop out, closely followed by a promise of big power if they map it themselves

what a bloody cynic i am today

bluest8, is you car an import hence the 8200 rev limit? if it is, then
yes it is an import car. it was brand new into this country and was owned by Prodrive Management for 3 years, so has bin well looked after.
I've had no major mods apart from a different Turbo actuator, fitted by Zak followed by :-
Iridium Plugs
S.T.i panel filter
ESX top mounted intercooler
Nur Spec R Full exhaust ( for Sale by the way
) an just completed a full service..
stu
THE GROUP BUY PRICE IS VALID TILL THE END OF FEBRUARY.
THIS APPLIES FOR ANY ONE WHO WISHES TO JOIN THE GROUP BUY AND FOR THOSE ALREADY ON THE LIST WHO HAVEN'T YET BOOKED IT IN WITH ZAK.
Booked:~
1. SirFozzalot ~ MY03 STi - BOOKED
2. Cookie ~ MY02 WRX - BOOKED
3. scoobyhurky ~ MY06 WRX - BOOKED
4. Pauld37 ~ MY01 WRX - Booking soon!

Complete:~
1. Neanderthal ~ MY03 WRX - DONE & HAPPY
2. Evez ~ MY03 WRX - DONE & HAPPY
3. B0DSKI ~ MY03 STi PPP - DONE & HAPPY
4. ice maiden ~ MY04 WRX - DONE & HAPPY
5. Hungrytang ~ MY05 WRX - DONE & HAPPY
6. Budge28 ~ MY03 WRX - DONE & HAPPY
7. bluest8 ~ MY04 JDM STi - DONE & HAPPY
To be booked:~
1. GMC ~ MY04 STi - TO BE CONFIRMED
2. monotokpoint - TO BE CONFIRMED
3. Jap imports - TO BE CONFIRMED
Other:~
1. wrxjay03 ~ MY03 WRX - Not done - Fuel Issues
2. Marky9074 ~ Forester STi - Awaiting mapping code
Plus with the fitting of the fuel pump, the plugs, wrapping and fitting the exhaust and then mapping I thought it might be pushing it to be done in a day and I didn't want Zak to have to rush it.
I can't make the lodge tonight are you RR on sunday fozz ?



Wonder what the Powerstaion rollers might make of a Mocom remap 
