Bungs for Afterburner Vortex back box from Hayward & Scott Group Buy
22 February 2006, 07:44 PM
#31
Scooby Regular
Thread Starter
Join Date: Jul 2005
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RB5 69
I will be up for this .... just want to see one fitted .... to get an idea of where the hole has to be drilled! 
Also, any idea how much the P&P on something like this will be?
Also, any idea how much the P&P on something like this will be?
Just asked the question.
22 February 2006, 11:07 PM
#32
will drill the hole for mine at the bottom. best way that i can think is to take the back box off, put some masking tape over where you intend to mark and drill the hole. then once marked and using a centre punch make an indent so that the drill doesn't slide about. make sure not to punch the tail pipe from the under side - you'll squash it!! then nice sharp drill and away you go. just be carefull!!!
rb5 69 - pics look good to me. i should be able to shop one of those. god i forget how well that style of exhaust suits the classic scooby. and i've got one on mine! it's just never that clean
rb5 69 - pics look good to me. i should be able to shop one of those. god i forget how well that style of exhaust suits the classic scooby. and i've got one on mine! it's just never that clean
22 February 2006, 11:23 PM
#33
Scooby Regular
iTrader: (1)
Join Date: May 2005
Location: Bonnie Scotland
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mneame
will drill the hole for mine at the bottom. best way that i can think is to take the back box off, put some masking tape over where you intend to mark and drill the hole. then once marked and using a centre punch make an indent so that the drill doesn't slide about. make sure not to punch the tail pipe from the under side - you'll squash it!! then nice sharp drill and away you go. just be carefull!!!
rb5 69 - pics look good to me. i should be able to shop one of those. god i forget how well that style of exhaust suits the classic scooby. and i've got one on mine! it's just never that clean
rb5 69 - pics look good to me. i should be able to shop one of those. god i forget how well that style of exhaust suits the classic scooby. and i've got one on mine! it's just never that clean
Car was only as clean as that cause it had just been washed .... and the exhaust polished!!
"make sure not to punch the tail pipe from the under side - you'll squash it!!" .... not sure what you mean by that mate?
Look forward to the pictures though,
Norm.
23 February 2006, 05:06 PM
#36
Scooby Regular
Thread Starter
Join Date: Jul 2005
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Message from Ian as follows
You can drill the hole anywhere at the bottom of the pipe and as far forward as you wish , you just have to rememeber that you still need to get it out so i wouldn't put it too far down the pipe.Yes we can supply the bolt.
P+P,£10
You can drill the hole anywhere at the bottom of the pipe and as far forward as you wish , you just have to rememeber that you still need to get it out so i wouldn't put it too far down the pipe.Yes we can supply the bolt.
P+P,£10
25 February 2006, 03:53 PM
#39
Scooby Regular
Thread Starter
Join Date: Jul 2005
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by The M@trix
wildfire, do you have any objections to me posting this on my forums and linking to here?
Thanks
Derek
Thanks
Derek
No problem, the more the better. I have put a link on the SIDC and Scoobycity websites myself.
25 February 2006, 06:35 PM
#40
didn't have time in the end today to fit the bung properly. apart from that it was too damn cold!! so i've just been out there and wedged it in to take a pic. btw i started the car while it was in there and for all you guys that have someone that nags whilst in the passenger seat this will stop them!! i couldn't beleive the difference.
1)wildfire
2)mneame - paid and collected.
3)Scoobynut555 - will collect
4)ScoobyDoo69
5)Skoosh
6)
7)
8)
9)
10)
thanks wildfire for sorting out the group buy!!
1)wildfire
2)mneame - paid and collected.
3)Scoobynut555 - will collect
4)ScoobyDoo69
5)Skoosh
6)
7)
8)
9)
10)
thanks wildfire for sorting out the group buy!!
25 February 2006, 07:33 PM
#41
Scooby Regular
Thread Starter
Join Date: Jul 2005
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mneame
didn't have time in the end today to fit the bung properly. apart from that it was too damn cold!! so i've just been out there and wedged it in to take a pic. btw i started the car while it was in there and for all you guys that have someone that nags whilst in the passenger seat this will stop them!! i couldn't beleive the difference.
1)wildfire
2)mneame - paid and collected.
3)Scoobynut555 - will collect
4)ScoobyDoo69
5)Skoosh
6)
7)
8)
9)
10)
thanks wildfire for sorting out the group buy!!
1)wildfire
2)mneame - paid and collected.
3)Scoobynut555 - will collect
4)ScoobyDoo69
5)Skoosh
6)
7)
8)
9)
10)
thanks wildfire for sorting out the group buy!!
Cheers for the picture and feedback
25 February 2006, 07:44 PM
#43
Scooby Regular
Thread Starter
Join Date: Jul 2005
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ScoobyDoo69
how do we got about ordering and when should we etc 
26 February 2006, 08:43 PM
#44
Scooby Regular
iTrader: (1)
Join Date: May 2005
Location: Bonnie Scotland
Posts: 572
Likes: 0
Received 0 Likes
on
0 Posts
1)wildfire
2)mneame - paid and collected.
3)Scoobynut555 - will collect
4)ScoobyDoo69
5)Skoosh
6)RB5 69
7)
8)
9)
10)
Added my name to this Group Buy .... althought the thought of drilling a hole in my lovely exhaust is bringing me out in a cold sweat!!
I think an e-mail may already have been sent, but just in case, a fellow member of the RB5 Owners Club (www.rb5oc.co.uk) asked if it would be possible to have one made for his TSL Firestorm back box with a 5" tailpipe??
2)mneame - paid and collected.
3)Scoobynut555 - will collect
4)ScoobyDoo69
5)Skoosh
6)RB5 69
7)
8)
9)
10)
Added my name to this Group Buy .... althought the thought of drilling a hole in my lovely exhaust is bringing me out in a cold sweat!!
I think an e-mail may already have been sent, but just in case, a fellow member of the RB5 Owners Club (www.rb5oc.co.uk) asked if it would be possible to have one made for his TSL Firestorm back box with a 5" tailpipe??
26 February 2006, 09:00 PM
#45
i know how you feel rb5 69. when i put mine in yesterday for that pic it was quite hard to get back out. i've not driven round with it in so i can't comment on if it would be ok to just poke it in the backbox and hope that nobody tries to nick it or if it will work it's way further in or out.
03 March 2006, 04:54 PM
#48
Scooby Regular
Thread Starter
Join Date: Jul 2005
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ScoobyDoo69
how do we got about ordering and when should we etc
payment are as before with group buys ....ring up with details and then the goods will be sent.
590772 • Email sales@haywardandscott.co.uk
Units 10 & 11 Nobel Square • Burnt Mills Industrial Estate • Basildon • Essex SS13 1LS
Tel (0)1268 727256 • Fax (0)1268
08 March 2006, 04:26 PM
#50
Scooby Regular
Join Date: Dec 2005
Location: Hertfordshire
Posts: 280
Likes: 0
Received 0 Likes
on
0 Posts
Spoke to Dawn today and ordered a full decat and bung so thought I'd better add my name below....
1)wildfire
2)mneame - paid and collected.
3)Scoobynut555 - will collect
4)ScoobyDoo69
5)Skoosh
6)RB5 69
7)RB5 309 - Bung for TSL firestorm
8)rmtypeR - booked for H&S to fit this for me 18th March
9)
10)
1)wildfire
2)mneame - paid and collected.
3)Scoobynut555 - will collect
4)ScoobyDoo69
5)Skoosh
6)RB5 69
7)RB5 309 - Bung for TSL firestorm
8)rmtypeR - booked for H&S to fit this for me 18th March
9)
10)
10 March 2006, 04:25 PM
#54
Scooby Regular
Thread Starter
Join Date: Jul 2005
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ayde
Can they do these to fit a Blitz NUR Spec? Had it sat in the garage for a couple of years cos its to loud for me with the full de-cat!
They can do them for most exhausts, drop them an email as i am sure they will.
12 March 2006, 05:13 PM
#55
Scooby Regular
Thread Starter
Join Date: Jul 2005
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Fitted today
Fitted today and it makes a big differance, a lot quiter over 70mph!!!
Anybody wanting to here the dif when parked up i have a small 1mb and 5mb vid clip. (both the same). Give me your email address and i will send it to you.
Anybody wanting to here the dif when parked up i have a small 1mb and 5mb vid clip. (both the same). Give me your email address and i will send it to you.
Last edited by wildfire; 12 March 2006 at 09:17 PM.
