Hi carl please supply extra connector for para fuel mod

 

payment sent carl

matt

 

Balance of payment sent

Am I correct in thinking that these regulators don't accept a direct fitting gauge like the FSE does? Presumably then an inline adaptor like the ones sold by Demon Tweeks is OK but does this go between the fuel filter and rails (feed side) or rails and regulator (return side) or where? Sorry to be dumb but I'm not sure

 

Paypall payment sent from D .Harries

 

Just aswell i logged on tonight was going to leave it till tomorrow night, after asking for a second group buy would have felt a right tube if i'd missed it!

Payment sent for my Regulator and also on behalf of Thomas12345
Cheers Kenny

 

Carl - a few things came up last night so I am going to send Paypal to you for the £94.05

OK?

Russell (away offshore in 4 hours)

 

Ok gentlemen, to cut to the chase we are just waiting on one more payment.

Check that what you see below is correct as this is what i have in my spreadsheet:

PAID 1. Carl Davey - Red
PAID 2. scoobboy - Red + Push-Fittings (Parallel)
PAID 3. Jay_bee - Red
PAID 4. RaymondH - Red + Push-Fittings

PAID 5. Kenny.S - Black + Push-Fittings
PAID 6. Andy 97- Black + Push-Fittings (Parallel)
PAID 7. Edge - Black (Airmail)
PAID 8. The Dark Force - Black + Push-Fittings (Parallel)
PAID 9 Big Bear - Black
PAID 10. Thomas12345 - Black + Push-Fittings

PAID 11. Nezz10 - Purple + Push Fittings

12. Morpheous - Blue
PAID 13 WUZ - Blue
PAID 14. Abbylad - Blue + Push Fittings
PAID 15 scoobynutt - Blue

 

RaymondH - I would like to know that too, I would guess that it would be in the feed side as that it where the important value would be?

 

Sorry guys, i'm not ignoring you - 1001 things going on at once at the moment as my internet access is +/- 2 hours per day until BT pull their finger out and connect me at my new place.

The easiest way to fit a gauge would be to buy the gauge and inline adaptor from FSE direct and fit it between the fuel rails and regulator. I'll ask about a 6AN > 1/8" NPT adaptor which could screw into the regulator when i go in today.

 

Carl - I have bought an FSE Gauge and Adaptor for the rail is there any other fittings i need to buy to fit the regulator and gauge to the regulator

 

Either an inline gauge adaptor (see link above) or i'll see if i can get some 6AN > 1/8" NPT adaptors and substitute the blanks i am supplying for those where necessary.

 

Put me down for one of those if you can get some please Carl.

thanks

Ab

 

Gauge adaptors sourced. Those of you who have a spare port in the reg (Ray, Kenny, Thomas, Neil + Martin) have the option of swapping your blank for a gauge adaptor if you wish?

 

Ok, cash has been sent. There's good news and bad news. The good news is i have been seconded to the office rather than offshore at least untill tomorrow - this means if the regulators arrive while i am still in the orifice i will be able to ship them within the week. However, the bad news is that we are short of 1 blue and 1 black regulator. A purple and a red regulator have been sent instead.

So i'm looking for two volunteers, one of whom is expecting a black regulator and one who is expecting a blue regulator to have their order made up with either a red or a purple one? You can both have red if desired as i have my own one left over from the last group buy.

 

Carl, i`ll swap my blanking plug for a gauge adaptor please chief, and i`ll give up my blue one for the red if no-ones claimed it yet.

cheers

Ab

 

Martin, you are down for a red one now, thanks. Just need someone who is down for a black one to swap to red or purple.

Unless anyone says otherwise i'll just supply the following persons who aren't teeing the parallel mod into the regulator with the gauge adaptor.

Ray, Kenny, Thomas, Neil + Martin

 

Hi Carl, just spoke to Thomas and if nobody else wants to change he'll take a red one instead of black.

Kenny

 

Hi Carl. Just confirming that I'd like the gauge adaptor please

 

Hi Carl - Can you send me the gauge adaptor as well, i am using the reg as part of the parallel mod rather than using a t piece before it, can i still fit the gauge to the regulator or what do i need to do mate?

 

Sorry Carl have been ultra really busy,If im not tooo llate let me know and i will do paypal now......Once again apoligies.....

 

Hi Kenny, thanks. The red ones look better anyway.

No worries Ray.

Carle, if you aren't teeing the parallel mod before the regulator the gauge adaptor is no use as it taps into one of the ports on the reg.

 

Morpheous, PayPal me the money and i can do you a red one. No blue ones available i'm afraid.

 

Carl have just sent Paypal and shipping details,Reds fine Many thanks

 

I will have the adaptor as wanna fit the gauge to the regulator, i will just have to t in before it.

 

Payment received Chris.

Carle, it's really a bit late to be changing your mind as to which fittings you would like. I've spent the cost of decent head unit buying them all and even some for spares. However, the one part i didn't order a surplus of was the gauge adaptors (which are a special order). I will go in tomorrow and if they don't chuck the catalogue at me, get some more adaptors. I've been pretty laid back with this group buy so far but this fittings malarky is becoming a nuisance.

 

Hi Carl any idea on a delivery date yet? I'm not really in a hurry for it just curious. I've got plenty to be doing just now getting everything else on the car ready for an Andy.F Power FC. Parallel fuel rail, walbro, injector's serviced and cleaned, exhaust.....

Cheers
Kenny

 

Wasnt changing my mind mate, just not well up on fuelling and didnt know what i needed, as never fitted a FPR before and all i wanna do is put the gauge into the regulator.

Can you order me one then as will still need to fit the gauge, if it takes a while thats ok mate, not trying to hassle you just wanna get the thing fitted, sorry

 

Kenny, they tried to deliver the regulators today but there was no-one in. I'll be going into town tomorrow to collect them so willl hopefully get them all sent out early next week.

Carle, ignorance is never an excuse. Will drop in past and order your fitting on Monday. You may get your reg a little later than everyone else however.

 

Nice one mate, best get my finger out then! Checked with Andy.F today about getting a Power FC mapped and he's booked up till near the end of August . Going to get everything else i need ordered up next week and get the old beastie booked in asap.Might have to be a complete kid and get some pops and bangs mapped into it

Kenny

 

Yeah i found when i was booking Andy to do my car it was best to book 2 or 3 months in advance... then do all the work at the very last minute.