Bedford Noise Testing 22nd January
#61
Scooby Regular
iTrader: (5)
Originally Posted by j-k
Ive got a prodrive backbox you can borrow big fella!!
With full decat and said backbox it should be about 95db me thinks(it was about that on Arrons car at castle coombe rally day)
Give me a buzz if you want to borrow it matey...
Pea shooters..on the Bling Machine...pmsl
jon.
With full decat and said backbox it should be about 95db me thinks(it was about that on Arrons car at castle coombe rally day)
Give me a buzz if you want to borrow it matey...
Pea shooters..on the Bling Machine...pmsl
jon.
#63
Scooby Regular
ESC Meeting@ Thurrock services 9-45 am Leaving @ 10 am
1.Tiny
2. Stan s ( Meeting @ Bedford)
3. budgie ( Nr bott of M1 Around J6 )
4. Hales ( En Route)
5. Lemmy ( Meeting @ Bedford )
6. Gangsta Smurf
7. Robbroy
8. Spally
9. Stuart Knight
10. shifty
11. Sir fozzalot
12. Kev Beale
Anymore then ?
1.Tiny
2. Stan s ( Meeting @ Bedford)
3. budgie ( Nr bott of M1 Around J6 )
4. Hales ( En Route)
5. Lemmy ( Meeting @ Bedford )
6. Gangsta Smurf
7. Robbroy
8. Spally
9. Stuart Knight
10. shifty
11. Sir fozzalot
12. Kev Beale
Anymore then ?
#64
Scooby Regular
The static Noise level measured from 0.5m from the exhaust pipe with the engine 2/3rds max rev must not exide 101dBa which will be measured by Circuit staff
The drive by noise level measured from 20m from the centreline of the vehicle passing at at least 60mph and accelerating maximally must not exceed 87dBa
The drive by noise level measured from 20m from the centreline of the vehicle passing at at least 60mph and accelerating maximally must not exceed 87dBa
#65
Scooby Regular
Join Date: Mar 2003
Location: BHP Club
Posts: 4,200
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by tiny01
The static Noise level measured from 0.5m from the exhaust pipe with the engine 2/3rds max rev must not exide 101dBa which will be measured by Circuit staff
The drive by noise level measured from 20m from the centreline of the vehicle passing at at least 60mph and accelerating maximally must not exceed 87dBa
The drive by noise level measured from 20m from the centreline of the vehicle passing at at least 60mph and accelerating maximally must not exceed 87dBa
I sincerely hope I pass it ... otherwise no track time for me!
What a bunch of boring old B.stards - 101 f.in DB ... bet if you had a f.in koeneggsegg they would let you on!
#68
Scooby Regular
PLEASE CAN YOU ALL TAKE ALONG A HELMET
If you fail the static noise test 102db , Then you will need to do a drive by test accompined with an instructor , To pass this you must not exceed 87.5 db
The track is closed for 1 hour @ 12-30 pm Just for us To carry out noise testing
Tiny...
If you fail the static noise test 102db , Then you will need to do a drive by test accompined with an instructor , To pass this you must not exceed 87.5 db
The track is closed for 1 hour @ 12-30 pm Just for us To carry out noise testing
Tiny...
#69
Track Day Organiser
Thread Starter
Enjoy your testing guys
My meeting has now been confirmed so I will have to leave you in Tiny's capable hands
Hopefully you will see the fruits of my meeting on the 26th at Bedford
My meeting has now been confirmed so I will have to leave you in Tiny's capable hands
Hopefully you will see the fruits of my meeting on the 26th at Bedford
#70
Scooby Regular
Originally Posted by phil_stephens
Enjoy your testing guys
My meeting has now been confirmed so I will have to leave you in Tiny's capable hands
Hopefully you will see the fruits of my meeting on the 26th at Bedford
My meeting has now been confirmed so I will have to leave you in Tiny's capable hands
Hopefully you will see the fruits of my meeting on the 26th at Bedford
Leave it in my capable hands
Best i find out where it is then !!
Tiny..
#71
Scooby Regular
From the South through Bedford
(Shorter route and simpler to follow but there may be more traffic though)
Likely to take 10-20 minutes longer. Leave the M1 at junction 13 and take the A421 towards Bedford and Cambridge. Take the A6 north towards Bedford and go through Bedford town centre following the A6 towards Rushden and Kettering. As the dual carriageway section of the A6 ends you will approach the village of Milton Ernest. Mind the speed camera and follow the A6 through the village. 3 miles after Milton Ernest, turn right at a roundabout signposted “Bedford Technology Park”. After about 1 mile turn left into Thurleigh Airfield Business Park. At the entrance to the site follow the Bedford Autodrome signs. PalmerSport personnel will meet you on your arrival.
(Shorter route and simpler to follow but there may be more traffic though)
Likely to take 10-20 minutes longer. Leave the M1 at junction 13 and take the A421 towards Bedford and Cambridge. Take the A6 north towards Bedford and go through Bedford town centre following the A6 towards Rushden and Kettering. As the dual carriageway section of the A6 ends you will approach the village of Milton Ernest. Mind the speed camera and follow the A6 through the village. 3 miles after Milton Ernest, turn right at a roundabout signposted “Bedford Technology Park”. After about 1 mile turn left into Thurleigh Airfield Business Park. At the entrance to the site follow the Bedford Autodrome signs. PalmerSport personnel will meet you on your arrival.
#73
Scooby Regular
Originally Posted by Gangsta Smurf
"through the town centre"
convoy of scoobs, midday (so loads of people), exhaust resonance from buildings - gotta be the only way to go!
convoy of scoobs, midday (so loads of people), exhaust resonance from buildings - gotta be the only way to go!
Way we went last time !!
Was better tho as we had the Tuscan in convoy with us
#75
Scooby Regular
ESC Meeting@ Thurrock services 9-45 am Leaving @ 10 am
1.Tiny
2. Robbroy
3. Stuart Knight
4. shifty
5. Sir fozzalot
6. Kev Beale
Meeting en Route
7. Hales ( M25 A10 Junction)
8. Budgie ( M1 J6
Meeting @ Bedford
9. Stan s
10. Lemmy
Anymore for a noise test ?
1.Tiny
2. Robbroy
3. Stuart Knight
4. shifty
5. Sir fozzalot
6. Kev Beale
Meeting en Route
7. Hales ( M25 A10 Junction)
8. Budgie ( M1 J6
Meeting @ Bedford
9. Stan s
10. Lemmy
Anymore for a noise test ?
#76
Scooby Regular
iTrader: (4)
Join Date: Jul 2001
Location: MSOC..........middlesex subaru owners club
Posts: 10,429
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gangsta Smurf
"through the town centre"
convoy of scoobs, midday (so loads of people), exhaust resonance from buildings - gotta be the only way to go!
convoy of scoobs, midday (so loads of people), exhaust resonance from buildings - gotta be the only way to go!
budgie
#77
Scooby Regular
Originally Posted by peter budgen
top man, worth leaving early for
budgie
budgie
Just hope the noise test people Aint out shopping
#82
Scooby Regular
iTrader: (1)
Join Date: Dec 2001
Location: You only live ONCE But if you do it right >>>>> ONCE is enough
Posts: 7,327
Likes: 0
Received 0 Likes
on
0 Posts
Optimax on the way to Bedford.
Leave M1 J12 and turn right onto A5120 to Flitwick.
SHELL FLITWICK 101 AMPTHILL ROAD FLITWICK MK45 1BE
After garage continue on up to roundabout & turn right onto A507 to pick up A6.
Take the A6 north towards Bedford and go through Bedford town centre following the A6 towards Rushden and Kettering. As the dual carriageway section of the A6 ends you will approach the village of Milton Ernest. Mind the speed camera and follow the A6 through the village. 3 miles after Milton Ernest, turn right at a roundabout signposted “Bedford Technology Park”. After about 1 mile turn left into Thurleigh Airfield Business Park. At the entrance to the site follow the Bedford Autodrome signs. PalmerSport personnel will meet you on your arrival.
Sorry for the late maps but nearly lost the end of my mouse finger in a sprocket & chain at work.So mouse clicking has been a bit hit & miss.
Have a good run today & try & keep the noise down.Some of us may be having a lie in.
Leave M1 J12 and turn right onto A5120 to Flitwick.
SHELL FLITWICK 101 AMPTHILL ROAD FLITWICK MK45 1BE
After garage continue on up to roundabout & turn right onto A507 to pick up A6.
Take the A6 north towards Bedford and go through Bedford town centre following the A6 towards Rushden and Kettering. As the dual carriageway section of the A6 ends you will approach the village of Milton Ernest. Mind the speed camera and follow the A6 through the village. 3 miles after Milton Ernest, turn right at a roundabout signposted “Bedford Technology Park”. After about 1 mile turn left into Thurleigh Airfield Business Park. At the entrance to the site follow the Bedford Autodrome signs. PalmerSport personnel will meet you on your arrival.
Sorry for the late maps but nearly lost the end of my mouse finger in a sprocket & chain at work.So mouse clicking has been a bit hit & miss.
Have a good run today & try & keep the noise down.Some of us may be having a lie in.
#85
Scooby Regular
Join Date: Oct 2001
Location: 1 of the ESC 1
Posts: 1,997
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by phil_stephens
Gangsta you don't know how close you were to being pulled this morning
Shame you were on the other side of the road
Shame you were on the other side of the road
#86
Scooby Regular
iTrader: (3)
Join Date: Nov 2000
Location: Norfolk
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
Hi Tiny,
Tested at a fairly consistent 86.5, 86.6 dB, so seems I need a different backbox
I thought it seemed quite quiet compared to others I've heard !
Hope our next meeting will be slightly less rushed !
How did everyone else get on ?
Stan
Tested at a fairly consistent 86.5, 86.6 dB, so seems I need a different backbox
I thought it seemed quite quiet compared to others I've heard !
Hope our next meeting will be slightly less rushed !
How did everyone else get on ?
Stan
#87
Scooby Regular
Stan , Sorry that out 1st meeting was a little rushed
But we wre on a really tight time schedule , Arrive 12pm , Test 12-30pm , Exit track 1-30 pm , Was going to be tight when you arrived @ 1:25pm
Glad that they got you tested , Seem a really good bunch there
Your car 430bhp!! Sounds good , May neeed to blag a passenger ride
We tested 11 Scoobies , With 8 Passes & 3 Failures
Hales Run 87.2 / 91.9
Robroy Run 88.0 / 87.5
87.5db is the failure for driveby , I Passed on both occasions Recording 84 / 85db Was measured As i changed from 2nd to 3rd @ 6-500rpm Going past the sound meter
Hales . Robroy & i Are all going to get Bungs made tho ,
There was one car White classic ( Waddsey69) He run 87.3 / 88.6 Without bung But then run laps with the bung & Recorded 81db ( So the bung making 7db difference )
Be good to see you all on 26th
Tiny...
But we wre on a really tight time schedule , Arrive 12pm , Test 12-30pm , Exit track 1-30 pm , Was going to be tight when you arrived @ 1:25pm
Glad that they got you tested , Seem a really good bunch there
Your car 430bhp!! Sounds good , May neeed to blag a passenger ride
We tested 11 Scoobies , With 8 Passes & 3 Failures
Hales Run 87.2 / 91.9
Robroy Run 88.0 / 87.5
87.5db is the failure for driveby , I Passed on both occasions Recording 84 / 85db Was measured As i changed from 2nd to 3rd @ 6-500rpm Going past the sound meter
Hales . Robroy & i Are all going to get Bungs made tho ,
There was one car White classic ( Waddsey69) He run 87.3 / 88.6 Without bung But then run laps with the bung & Recorded 81db ( So the bung making 7db difference )
Be good to see you all on 26th
Tiny...
#89
Scooby Regular
Results of the sound testing
Tiny ... 84 - 85db
Waddsey69 81.0 ( With Bung fitted )
Waddsey69 87.3 - 88.6 ( Without Bung fitted)
Sir Fozzie 74.4 - 73.9
Budgie 74.6 - 82.1
Hales 87.2 - 91.9
Lemmy 84.6 - 82.1
Robroy 88.0 - 87.5
Shifty 84.0 - 84.4
Red Scooby ( Unsure of Name ) 83.3 - 85.7 - 86.5
Stuart Knight 75.0
Tiny ... 84 - 85db
Waddsey69 81.0 ( With Bung fitted )
Waddsey69 87.3 - 88.6 ( Without Bung fitted)
Sir Fozzie 74.4 - 73.9
Budgie 74.6 - 82.1
Hales 87.2 - 91.9
Lemmy 84.6 - 82.1
Robroy 88.0 - 87.5
Shifty 84.0 - 84.4
Red Scooby ( Unsure of Name ) 83.3 - 85.7 - 86.5
Stuart Knight 75.0
#90
Scooby Regular
Join Date: Nov 2004
Location: A GOOD MEMBER OF ESC & SIDC : )
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
[
Shifty 84.0 - 84.4
nice thats a bit off my mind,,,,,
i should of missed a gear like rob did to get an extra lap
rolling road next week cant wait to see wot my standard
is pushing
Shifty 84.0 - 84.4
nice thats a bit off my mind,,,,,
i should of missed a gear like rob did to get an extra lap
rolling road next week cant wait to see wot my standard
is pushing