Sunstrip Group Buy...
#92
Scooby Regular
Join Date: Apr 2003
Location: Nottinghamshire : Out the flat 4 and in the V8
Posts: 989
Likes: 0
Received 0 Likes
on
0 Posts
got mine too -cheers mate
Dave
Just got to clean the car before I can fit em - BTW - whats the best way to line it all up - thanks
Dave
Just got to clean the car before I can fit em - BTW - whats the best way to line it all up - thanks
#95
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: S. Wales
Posts: 928
Likes: 0
Received 0 Likes
on
0 Posts
I presume it's just a case of lining it up using a tape measure!!
Will do mine tomorrow and see how I get on!!
Also, I have managed to get the supplier to do a follow-up on the side windows (see below..) Again, this will only run until next week so let me know if you are interested!!
Thanks for all your efforts guys!,
Matt.
Will do mine tomorrow and see how I get on!!
Also, I have managed to get the supplier to do a follow-up on the side windows (see below..) Again, this will only run until next week so let me know if you are interested!!
Thanks for all your efforts guys!,
Matt.
#97
Twigster - Black + Silver
Skoosh - Black + Silver
robbie09 ??
nescoob1 - Black + Silver
sarahbee - Black + Silver
U WOT! - Red + White (Should be ok but I will check)
Twig Killer - Not sure as yet.
Scott.T - Black + Silver (With logo)
noobscoob-black+silver (if there is any left )
Skoosh - Black + Silver
robbie09 ??
nescoob1 - Black + Silver
sarahbee - Black + Silver
U WOT! - Red + White (Should be ok but I will check)
Twig Killer - Not sure as yet.
Scott.T - Black + Silver (With logo)
noobscoob-black+silver (if there is any left )
#100
Yep, stick me down for this too:
Twigster - Black + Silver
Skoosh - Black + Silver
robbie09 ??
nescoob1 - Black + Silver
sarahbee - Black + Silver
U WOT! - Red + White (Should be ok but I will check)
Twig Killer - Not sure as yet.
Scott.T - Black + Silver (With logo)
noobscoob-black+silver (if there is any left )
Bogie - black+silver
Cheers
Twigster - Black + Silver
Skoosh - Black + Silver
robbie09 ??
nescoob1 - Black + Silver
sarahbee - Black + Silver
U WOT! - Red + White (Should be ok but I will check)
Twig Killer - Not sure as yet.
Scott.T - Black + Silver (With logo)
noobscoob-black+silver (if there is any left )
Bogie - black+silver
Cheers
#101
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: S. Wales
Posts: 928
Likes: 0
Received 0 Likes
on
0 Posts
They are just at the bottom of the window, come with Subaru lettering in Black and Silver lettering and the price I was given is £10 for the pair!!
GB2 List..
Twigster
Bogie
Scott T
Nescoob1
GB2 List..
Twigster
Bogie
Scott T
Nescoob1
#102
Count me in (can I take the credit for instigating this then?)
Twigster
Is it just a cheque with our details again to the same address as per the last GB?
Twigster
Bogie
Scott T
Nescoob1
Big Den
By the way Bogie et all
I believe you apply the black strip to the window firstly, using the soapy water as previously described. The silver lettering will then be applied on top of the black strip but I'm sure this is done DRY & rubbed on thru the backing paper with a good edged windscreen scraper or similar (plastic not metal!!!). You then peel away the backing paper & voila!!
Big Den
Twigster
Is it just a cheque with our details again to the same address as per the last GB?
Twigster
Bogie
Scott T
Nescoob1
Big Den
By the way Bogie et all
I believe you apply the black strip to the window firstly, using the soapy water as previously described. The silver lettering will then be applied on top of the black strip but I'm sure this is done DRY & rubbed on thru the backing paper with a good edged windscreen scraper or similar (plastic not metal!!!). You then peel away the backing paper & voila!!
Big Den
Last edited by Big Den; 18 June 2004 at 07:58 PM.
#103
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: S. Wales
Posts: 928
Likes: 0
Received 0 Likes
on
0 Posts
Fitted mine this afternoon!!
Use soapy water to THOROUGHLY soak the windscreen, align black strip and, using a credit card (in a cloth or tissue so it can't cut the strip), smooth out the strip once you have aligned it, repeat for the read (if you have one) although here you may have to cut some of it to fit along the top rubber strip. ( I used a craft knife very gently, and used too much which I then slipped under the rubber protector with a credit card to make it look neater!
Allow the strip to dry, after about an hour or two you can then align and fit the lettering from the backing paper (get someone to help align it and you should be well away!) Again, use a credit card to help remove bubbles etc before you apply any firm pressure to it.
Simple eh!!
And yes Den (and anyone else) cheques etc. to the same supplier for the side strips!!
Use soapy water to THOROUGHLY soak the windscreen, align black strip and, using a credit card (in a cloth or tissue so it can't cut the strip), smooth out the strip once you have aligned it, repeat for the read (if you have one) although here you may have to cut some of it to fit along the top rubber strip. ( I used a craft knife very gently, and used too much which I then slipped under the rubber protector with a credit card to make it look neater!
Allow the strip to dry, after about an hour or two you can then align and fit the lettering from the backing paper (get someone to help align it and you should be well away!) Again, use a credit card to help remove bubbles etc before you apply any firm pressure to it.
Simple eh!!
And yes Den (and anyone else) cheques etc. to the same supplier for the side strips!!
#112
Scooby Regular
Join Date: Aug 2003
Location: Aberdeen
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Scott.T
havn't got mine yet.....
Anyone managed to take a piccie yet ?
Anyone managed to take a piccie yet ?
I don't know how clear the picture is
Sarah