Power Engineering Rolling Road Day 12th May

Reply Subscribe

Thread Tools

Search this Thread

May 15, 2004 | 10:11 PM

#181

terryb

Scooby Regular

Joined: May 2004

Posts: 2,443

Likes: 0

From: in motoring nirvana.....

May 15, 2004 | 11:32 PM

#182

pele

Thread Starter

Scooby Regular

Joined: Jan 2002

Posts: 2,746

Likes: 0

From: A lot closer than you think...

StanS - 424bhp/362lbs/ft - Full decat, K&N induction, FMIC
Pete - 421bhp/319lbs/ft - Skyline
RB5SCOTT - 367bhp/367lbs/ft
Fulham71 - 340bhp/328lbs/ft
Dovo - 331bhp/299lbs/ft - Supra
Riceboy - 327bhp/313lbs/ft
Fuz - 324bhp/312lbs/f
The Guru - 323bhp/294lbs/ft
p-j - 316bhp/269lbs/ft
LoFi - 309bhp/292lbs/ft MY01 WRX full decat, TD05, APS TM, Sti inj., U/R fuel pump & reg, ITG
Delboy2 - 307bhp/295lbs/ft - UK MY96 Wagon, Full Decat, Apexi Induction, FMIC etc etc
Hol - 299bhp/276lbs/ft
Taffr - 288bhp/280lbs/ft
Loony Toon - 283bhp/240lbs/ft - uk wrx my01, full de-cat, tech 3, uprated fuel pump, air filter and not a lot more
Terry Beast - 279bhp/253lbs/ft - P1 with full decat (or so I was told)
Q-Dog - 278bhp/255lbs/ft : MY98 2Dr Type R, Standard Jap import - Well happy on uk fuel
Mel - 274bhp/279lbs/ft - UK2000turbo Full de-cat,K&N panel filter,U/R Fuel Pump & Ecutek 2
Seb - 269bhp/269lbs/ft
Marklemac - 268bhp/259lbs/ft
Danbo - 267bhp/274lbs/ft - MY00 Aussie WRX (same as UK spec), Full Decat, ITG, Tek3
STB Butty - 264bhp/263lbs/ft
Pele - 263bhp/248lbs/ft - UK Turbo 2000, full de-cat, K&N, U/R fuel pump & reg etc.
Paul - 255bhp/237lbs/ft
V5 Man - 253bhp/225lbs/ft - UK Turbo MY95, full decat,Blitz Nur spec,STi filter,VTA DV.
Neilo - 252bhp/251lbs/ft - UK 03 WRX, backbox and filter (NON PPP, touch of Oct Booster though )
Terzo 228 - 250bhp/234lbs/ft
Martin 850 - 249bhp/242lbs/ft
SteveR - 242bhp/220lbs/ft ...MY99 UK turbo, Magnex straight through centre section and backbox, K&N panel, forge VTA, DIY mod to air intake, and Optimax
No-bars Krud - 241bhp/241lbs/ft
Scoobysnacks - 241bhp/214lbs/ft - decat from down pipe -miltek bbox induction kit- not very happy on results thought i get more on an import WRX
Stevenm2k - 239bhp/233lbs/ft
MiniMan - 232bhp/235lbs/ft
Jay M A - 226bhp/239lbs/ft
Slo Mo - 138bhp/ - Sport

Last edited by pele; May 15, 2004 at 11:37 PM.

May 16, 2004 | 12:09 AM

#183

Neilo

Scooby Regular

Joined: Jul 2003

Posts: 5,734

Likes: 0

From: Behind the wheel of a Time Attack R33 GTR

Damn, wish youd sort it in torque....then id be higher

Still chuffed to bits!!!!

Neil.

May 16, 2004 | 12:18 AM

#184

Jay m A

Scooby Regular

iTrader: (2)

Joined: May 2000

Posts: 8,626

Likes: 1

From: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton

Quote:

Originally Posted by Neilo

Damn, wish youd sort it in torque....then id be higher

Still chuffed to bits!!!!

Neil.

You're not the only one

May 16, 2004 | 12:25 AM

#185

Neilo

Scooby Regular

Joined: Jul 2003

Posts: 5,734

Likes: 0

From: Behind the wheel of a Time Attack R33 GTR

yeah i spotted yours Jay, what were you running? interesting figures!

May 16, 2004 | 12:28 AM

#186

Pbone

Scooby Regular

Joined: Jun 2000

Posts: 1,011

Likes: 0

Flames

My flames were bigger than I expected. but well pleased with them. Bring out the sausages!!!!!!

May 16, 2004 | 08:59 AM

#187

Jay m A

Scooby Regular

iTrader: (2)

Joined: May 2000

Posts: 8,626

Likes: 1

From: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton

Quote:

Originally Posted by Neilo

yeah i spotted yours Jay, what were you running? interesting figures!

Completly std 94 WRX wagon (R/A TD04) apart from H&S 3" (no taper to 2.5")downpipe and Revolution 3" centre/Backbox.

It was running 11psi dropping to 10 psi at 5500.

Max power at 5575 so awaiting Pavlo's ScoobyECU with interest

More interesting is the torque

Peak was at 3000 rpm - also 200 lbft@2500 and 220+ from 2750 - 5300, all this with std boost control.

I thought I'd have the lowest power turbo considering this car is 220 PS (216bhp) on 100RON.

Well chuffed with the torque though

May 16, 2004 | 09:35 AM

#188

marklemac

Scooby Regular

Joined: Dec 2002

Posts: 1,986

Likes: 0

From: Southampton*** MY02 STi, Black/Blue Mica Prodrive Style, mildly modded :) :). ***

StanS - 424bhp/362lbs/ft - Full decat, K&N induction, FMIC
Pete - 421bhp/319lbs/ft - Skyline
RB5SCOTT - 367bhp/367lbs/ft
Fulham71 - 340bhp/328lbs/ft
Dovo - 331bhp/299lbs/ft - Supra
Riceboy - 327bhp/313lbs/ft
Fuz - 324bhp/312lbs/f
p-j - 316bhp/269lbs/ft
LoFi - 309bhp/292lbs/ft MY01 WRX full decat, TD05, APS TM, Sti inj., U/R fuel pump & reg, ITG
Delboy2 - 307bhp/295lbs/ft - UK MY96 Wagon, Full Decat, Apexi Induction, FMIC etc etc
Hol - 299bhp/276lbs/ft
Taffr - 288bhp/280lbs/ft
Loony Toon - 283bhp/240lbs/ft - uk wrx my01, full de-cat, tech 3, uprated fuel pump, air filter and not a lot more
Terry Beast - 279bhp/253lbs/ft
Q-Dog - 278bhp/255lbs/ft : MY98 2Dr Type R, Standard Jap import - Well happy on uk fuel
Mel - 274bhp/279lbs/ft - UK2000turbo Full de-cat,K&N panel filter,U/R Fuel Pump & Ecutek 2
Seb - 269bhp/269lbs/ft
Marklemac - 268bhp/259lbs/ft - MY02 STI PPP, STI Panel Filter, HKS SSQV. crap results..
Danbo - 267bhp/274lbs/ft - MY00 Aussie WRX (same as UK spec), Full Decat, ITG, Tek3
STB Butty - 264bhp/263lbs/ft
Pele - 263bhp/248lbs/ft - UK Turbo 2000, full de-cat, K&N, U/R fuel pump & reg etc.
Paul - 255bhp/237lbs/ft
V5 Man - 253bhp/225lbs/ft
Neilo - 252bhp/251lbs/ft - UK 03 WRX, backbox and filter (NON PPP, touch of Oct Booster though )
Terzo 228 - 250bhp/234lbs/ft
Martin 850 - 249bhp/242lbs/ft
SteveR - 242bhp/220lbs/ft ...MY99 UK turbo, Magnex straight through centre section and backbox, K&N panel, forge VTA, DIY mod to air intake, and Optimax
No-bars Krud - 241bhp/241lbs/ft
Scoobysnacks - 241bhp/214lbs/ft - decat from down pipe -miltek bbox induction kit- not very happy on results thought i get more on an import WRX
Stevenm2k - 239bhp/233lbs/ft
MiniMan - 232bhp/235lbs/ft
Jay M A - 226bhp/239lbs/ft
Slo Mo - 138bhp/ - Sport

May 16, 2004 | 09:41 AM

#189

stevem2k

Scooby Regular

Joined: Sep 2001

Posts: 4,670

Likes: 0

From: Kingston ( Surrey, not Jamaica )

(down on power compared to pre-remap and downpipe fitting)
MiniMan - 232bhp/235lbs/ft
Jay M A - 226bhp/239lbs/ft
Slo Mo - 138bhp/ - Sport

May 16, 2004 | 10:11 AM

#190

Terzo228

Scooby Regular

Joined: Apr 2003

Posts: 1,129

Likes: 0

From: sold the scoob , and do i miss it ? yes like mad

Martin 850 - 249bhp/242lbs/ft
SteveR - 242bhp/220lbs/ft ...MY99 UK turbo, Magnex straight through centre section and backbox, K&N panel, forge VTA, DIY mod to air intake, and Optimax
No-bars Krud - 241bhp/241lbs/ft
Scoobysnacks - 241bhp/214lbs/ft - decat from down pipe -miltek bbox induction kit- not very happy on results thought i get more on an import WRX
Stevem2k - 239bhp/233lbs/ft - Full Decat, Tek3 , Poorly Motor (down on power compared to pre-remap and downpipe fitting)
MiniMan - 232bhp/235lbs/ft
Jay M A - 226bhp/239lbs/ft
Slo Mo - 138bhp/ - Sport

May 16, 2004 | 11:04 AM

#191

RB5SCOTT

Scooby Regular

Joined: Jul 2000

Posts: 3,531

Likes: 0

Yeah i reckon someone has got to sort the list with highest torque first

Fuz?????

May 16, 2004 | 11:08 AM

#192

pele

Thread Starter

Scooby Regular

Joined: Jan 2002

Posts: 2,746

Likes: 0

From: A lot closer than you think...

StanS - 424bhp/362lbs/ft - Full decat, K&N induction, FMIC
Pete - 421bhp/319lbs/ft - Skyline
RB5SCOTT - 367bhp/367lbs/ft
Fulham71 - 340bhp/328lbs/ft
Dovo - 331bhp/299lbs/ft - Supra
Riceboy - 327bhp/313lbs/ft
Fuz - 324bhp/312lbs/f
The Guru - 323bhp/294lbs/ft
p-j - 316bhp/269lbs/ft
LoFi - 309bhp/292lbs/ft MY01 WRX full decat, TD05, APS TM, Sti inj., U/R fuel pump & reg, ITG
Delboy2 - 307bhp/295lbs/ft - UK MY96 Wagon, Full Decat, Apexi Induction, FMIC etc etc
Hol - 299bhp/276lbs/ft - 98 Type R. Decat, Link ECU on 98ron Map and a set of headers its not mapped for (Oops!) Down on last time!
Taffr - 288bhp/280lbs/ft
Loony Toon - 283bhp/240lbs/ft - uk wrx my01, full de-cat, tech 3, uprated fuel pump, air filter and not a lot more
Terry Beast - 279bhp/253lbs/ft - P1 with full decat (or so I was told)
Q-Dog - 278bhp/255lbs/ft : MY98 2Dr Type R, Standard Jap import - Well happy on uk fuel
Mel - 274bhp/279lbs/ft - UK2000turbo Full de-cat,K&N panel filter,U/R Fuel Pump & Ecutek 2
Seb - 269bhp/269lbs/ft
Marklemac - 268bhp/259lbs/ft - MY02 STI PPP, STI Panel Filter, HKS SSQV. crap results.
Danbo - 267bhp/274lbs/ft - MY00 Aussie WRX (same as UK spec), Full Decat, ITG, Tek3
STB Butty - 264bhp/263lbs/ft - UK MY04 Wagon PPP
Pele - 263bhp/248lbs/ft - UK Turbo 2000, full de-cat, K&N, U/R fuel pump & reg etc.
Paul - 255bhp/237lbs/ft
V5 Man - 253bhp/225lbs/ft - UK Turbo MY95, full decat,Blitz Nur spec,STi filter,VTA DV.
Neilo - 252bhp/251lbs/ft - UK 03 WRX, backbox and filter (NON PPP, touch of Oct Booster though )
Terzo 228 - 250bhp/234lbs/ft - Scoobysport back box, Full de-cat, K&N57i, Forge D/V and some swissol for an extra 5 bhp

Martin 850 - 249bhp/242lbs/ft
SteveR - 242bhp/220lbs/ft ...MY99 UK turbo, Magnex straight through centre section and backbox, K&N panel, forge VTA, DIY mod to air intake, and Optimax
No-bars Krud - 241bhp/241lbs/ft
Scoobysnacks - 241bhp/214lbs/ft - decat from down pipe -miltek bbox induction kit- not very happy on results thought i get more on an import WRX
Stevenm2k - 239bhp/233lbs/ft - Full Decat, Tek3 , Poorly Motor

(down on power compared to pre-remap and downpipe fitting)
MiniMan - 232bhp/235lbs/ft
Jay M A - 226bhp/239lbs/ft
Slo Mo - 138bhp/ - 2001 2l GX, Home made induction kit

Last edited by pele; May 16, 2004 at 11:44 AM.

May 16, 2004 | 11:46 AM

#193

pele

Thread Starter

Scooby Regular

Joined: Jan 2002

Posts: 2,746

Likes: 0

From: A lot closer than you think...

Scott - just because you want to be at the top of the list

May 16, 2004 | 03:12 PM

#194

Danbo

Scooby Regular

Joined: Jan 2002

Posts: 1,187

Likes: 0

Torque as requested

RB5SCOTT - 367bhp/367lbs/ft
StanS - 424bhp/362lbs/ft - Full decat, K&N induction, FMIC
Fulham71 - 340bhp/328lbs/ft
Pete - 421bhp/319lbs/ft - Skyline
Riceboy - 327bhp/313lbs/ft
Fuz - 324bhp/312lbs/f
Dovo - 331bhp/299lbs/ft - Supra
Delboy2 - 307bhp/295lbs/ft - UK MY96 Wagon, Full Decat, Apexi Induction, FMIC etc etc
The Guru - 323bhp/294lbs/ft
LoFi - 309bhp/292lbs/ft MY01 WRX full decat, TD05, APS TM, Sti inj., U/R fuel pump & reg, ITG
Taffr - 288bhp/280lbs/ft
Mel - 274bhp/279lbs/ft - UK2000turbo Full de-cat,K&N panel filter,U/R Fuel Pump & Ecutek 2
Hol - 299bhp/276lbs/ft - 98 Type R. Decat, Link ECU on 98ron Map and a set of headers its not mapped for (Oops!) Down on last time!
Danbo - 267bhp/274lbs/ft - MY00 Aussie WRX (same as UK spec), Full Decat, ITG, Tek3
p-j - 316bhp/269lbs/ft
Seb - 269bhp/269lbs/ft
STB Butty - 264bhp/263lbs/ft - UK MY04 Wagon PPP
Marklemac - 268bhp/259lbs/ft - MY02 STI PPP, STI Panel Filter, HKS SSQV. crap results.
Q-Dog - 278bhp/255lbs/ft : MY98 2Dr Type R, Standard Jap import - Well happy on uk fuel
Terry Beast - 279bhp/253lbs/ft - P1 with full decat (or so I was told)
Neilo - 252bhp/251lbs/ft - UK 03 WRX, backbox and filter (NON PPP, touch of Oct Booster though )
Pele - 263bhp/248lbs/ft - UK Turbo 2000, full de-cat, K&N, U/R fuel pump & reg etc.
Martin 850 - 249bhp/242lbs/ft
No-bars Krud - 241bhp/241lbs/ft
Loony Toon - 283bhp/240lbs/ft - uk wrx my01, full de-cat, tech 3, uprated fuel pump, air filter and not a lot more
Jay M A - 226bhp/239lbs/ft
Paul - 255bhp/237lbs/ft
MiniMan - 232bhp/235lbs/ft
Terzo 228 - 250bhp/234lbs/ft - Scoobysport back box, Full de-cat, K&N57i, Forge D/V and some swissol for an extra 5 bhp
Stevenm2k - 239bhp/233lbs/ft - Full Decat, Tek3 , Poorly Motor (down on power compared to pre-remap and downpipe fitting)
V5 Man - 253bhp/225lbs/ft - UK Turbo MY95, full decat,Blitz Nur spec,STi filter,VTA DV.
SteveR - 242bhp/220lbs/ft ...MY99 UK turbo, Magnex straight through centre section and backbox, K&N panel, forge VTA, DIY mod to air intake, and Optimax
Scoobysnacks - 241bhp/214lbs/ft - decat from down pipe -miltek bbox induction kit- not very happy on results thought i get more on an import WRX
Slo Mo - 138bhp/ - 2001 2l GX, Home made induction kit

Now if someone gets really bored they could organise it all into order for classics, bugeyes and blobeyes seperately.............

Last edited by Danbo; May 16, 2004 at 03:38 PM.

May 16, 2004 | 04:06 PM

#195

martin850

Scooby Regular

iTrader: (51)

Joined: Nov 2002

Posts: 7,439

Likes: 0

From: MSOC

Not pleased at all with my run, it is an MY95 WRX with a full hks de-cat,MY02 tmic conversion, HKS SSQV and an uprated panel filter running 1bar of boost and all I got was a measly 249bhp/242lbft torque.

It made 268bhp/238lbft torque last time with only a slanted tmic and a catted downpipe running 0.8 bar boost.

I think the fact that I went on the rollers after only 5mins of arriveing and
the heat plus no octain booster probably didn't help matters much.

I will do another run when I have got my scoobyecu fitted and maybe try with an induction kit this time.

Still had a good time though.

See you all at the next one.

Martin

May 16, 2004 | 05:02 PM

#196

pele

Thread Starter

Scooby Regular

Joined: Jan 2002

Posts: 2,746

Likes: 0

From: A lot closer than you think...

StanS - 424bhp/362lbs/ft - Full decat, K&N induction, FMIC
Pete - 421bhp/319lbs/ft - Skyline
RB5SCOTT - 367bhp/367lbs/ft
Fulham71 - 340bhp/328lbs/ft
Dovo - 331bhp/299lbs/ft - Supra
Riceboy - 327bhp/313lbs/ft
Fuz - 324bhp/312lbs/f
The Guru - 323bhp/294lbs/ft
p-j - 316bhp/269lbs/ft
LoFi - 309bhp/292lbs/ft MY01 WRX full decat, TD05, APS TM, Sti inj., U/R fuel pump & reg, ITG
Delboy2 - 307bhp/295lbs/ft - UK MY96 Wagon, Full Decat, Apexi Induction, FMIC etc etc
Hol - 299bhp/276lbs/ft - 98 Type R. Decat, Link ECU on 98ron Map and a set of headers its not mapped for (Oops!) Down on last time!
Taffr - 288bhp/280lbs/ft
Loony Toon - 283bhp/240lbs/ft - uk wrx my01, full de-cat, tech 3, uprated fuel pump, air filter and not a lot more
Terry Beast - 279bhp/253lbs/ft - P1 with full decat (or so I was told)
Q-Dog - 278bhp/255lbs/ft : MY98 2Dr Type R, Standard Jap import - Well happy on uk fuel
Mel - 274bhp/279lbs/ft - UK2000turbo Full de-cat,K&N panel filter,U/R Fuel Pump & Ecutek 2
Seb - 269bhp/269lbs/ft
Marklemac - 268bhp/259lbs/ft - MY02 STI PPP, STI Panel Filter, HKS SSQV. crap results.
Danbo - 267bhp/274lbs/ft - MY00 Aussie WRX (same as UK spec), Full Decat, ITG, Tek3
STB Butty - 264bhp/263lbs/ft - UK MY04 Wagon PPP
Pele - 263bhp/248lbs/ft - UK Turbo 2000, full de-cat, K&N, U/R fuel pump & reg etc.
Paul - 255bhp/237lbs/ft
V5 Man - 253bhp/225lbs/ft - UK Turbo MY95, full decat,Blitz Nur spec,STi filter,VTA DV.
Neilo - 252bhp/251lbs/ft - UK 03 WRX, backbox and filter (NON PPP, touch of Oct Booster though )
Terzo 228 - 250bhp/234lbs/ft - Scoobysport back box, Full de-cat, K&N57i, Forge D/V and some swissol for an extra 5 bhp

Martin 850 - 249bhp/242lbs/ft - MY95 WRX with a full hks de-cat,MY02 tmic conversion, HKS SSQV and an uprated panel filter running 1bar of boost
SteveR - 242bhp/220lbs/ft ...MY99 UK turbo, Magnex straight through centre section and backbox, K&N panel, forge VTA, DIY mod to air intake, and Optimax
No-bars Krud - 241bhp/241lbs/ft
Scoobysnacks - 241bhp/214lbs/ft - decat from down pipe -miltek bbox induction kit- not very happy on results thought i get more on an import WRX
Stevenm2k - 239bhp/233lbs/ft - Full Decat, Tek3 , Poorly Motor

(down on power compared to pre-remap and downpipe fitting)
MiniMan - 232bhp/235lbs/ft
Jay M A - 226bhp/239lbs/ft
Slo Mo - 138bhp/ - 2001 2l GX, Home made induction kit

May 16, 2004 | 05:57 PM

#197

RB5SCOTT

Scooby Regular

Joined: Jul 2000

Posts: 3,531

Likes: 0

Danbo

that looks better

Pele, well as it was a subaru rolling road day and all subaru owners talk about is "drivability and that torque is more important"

i thought it would be more indicative of the scooby scene

May 16, 2004 | 06:37 PM

#198

No-bars Krud

Scooby Regular

Joined: Nov 2003

Posts: 770

Likes: 0

From: SIDC East Sussex Regional Organiser and 555 Wagon Squadron Flight Officer

Thanks to investigations, and chatting with Chris Todd (who was very helpful) and others since, it seems I have very conservative timing in my ECU - hence only 241bhp! This is with a TEK2.5 and full decat. Car used to run 250bhp with a cat in the downpipe and Tek1, so with the timing map sorted I should get better figures. Car holds 1.2 bar boost up a hill according to Defi, so it's not all bad. Still, had a great day!

Keith

May 16, 2004 | 06:43 PM

#199

v5 man

Scooby Regular

iTrader: (4)

Joined: Aug 2002

Posts: 4,617

Likes: 1

From: High Wycombe

oi, leave it alone. I dont like being 11th from bottom on the bhp list, let alone dropping to 5th from bottom on the torque one

Cliff

May 16, 2004 | 06:45 PM

#200

Danbo

Scooby Regular

Joined: Jan 2002

Posts: 1,187

Likes: 0

Sorry!

May 16, 2004 | 07:17 PM

#201

pele

Thread Starter

Scooby Regular

Joined: Jan 2002

Posts: 2,746

Likes: 0

From: A lot closer than you think...

You just wanted to be at the top of the list Scott

StanS - 424bhp/362lbs/ft - Full decat, K&N induction, FMIC
Pete - 421bhp/319lbs/ft - Skyline
RB5SCOTT - 367bhp/367lbs/ft
Fulham71 - 340bhp/328lbs/ft
Dovo - 331bhp/299lbs/ft - Supra
Riceboy - 327bhp/313lbs/ft
Fuz - 324bhp/312lbs/f
The Guru - 323bhp/294lbs/ft
p-j - 316bhp/269lbs/ft
LoFi - 309bhp/292lbs/ft MY01 WRX full decat, TD05, APS TM, Sti inj., U/R fuel pump & reg, ITG
Delboy2 - 307bhp/295lbs/ft - UK MY96 Wagon, Full Decat, Apexi Induction, FMIC etc etc
Hol - 299bhp/276lbs/ft - 98 Type R. Decat, Link ECU on 98ron Map and a set of headers its not mapped for (Oops!) Down on last time!
Taffr - 288bhp/280lbs/ft
Loony Toon - 283bhp/240lbs/ft - uk wrx my01, full de-cat, tech 3, uprated fuel pump, air filter and not a lot more
Terry Beast - 279bhp/253lbs/ft - P1 with full decat (or so I was told)
Q-Dog - 278bhp/255lbs/ft : MY98 2Dr Type R, Standard Jap import - Well happy on uk fuel
Mel - 274bhp/279lbs/ft - UK2000turbo Full de-cat,K&N panel filter,U/R Fuel Pump & Ecutek 2
Seb - 269bhp/269lbs/ft
Marklemac - 268bhp/259lbs/ft - MY02 STI PPP, STI Panel Filter, HKS SSQV. crap results.
Danbo - 267bhp/274lbs/ft - MY00 Aussie WRX (same as UK spec), Full Decat, ITG, Tek3
STB Butty - 264bhp/263lbs/ft - UK MY04 Wagon PPP
Pele - 263bhp/248lbs/ft - UK Turbo 2000, full de-cat, K&N, U/R fuel pump & reg etc.
Paul - 255bhp/237lbs/ft
V5 Man - 253bhp/225lbs/ft - UK Turbo MY95, full decat,Blitz Nur spec,STi filter,VTA DV.
Neilo - 252bhp/251lbs/ft - UK 03 WRX, backbox and filter (NON PPP, touch of Oct Booster though )
Terzo 228 - 250bhp/234lbs/ft - Scoobysport back box, Full de-cat, K&N57i, Forge D/V and some swissol for an extra 5 bhp

(down on power compared to pre-remap and downpipe fitting)
MiniMan - 232bhp/235lbs/ft
Jay M A - 226bhp/239lbs/ft
Slo Mo - 138bhp/ - 2001 2l GX, Home made induction kit

May 16, 2004 | 07:42 PM

#202

Fangoria

Scooby Regular

iTrader: (1)

Joined: Apr 2001

Posts: 1,841

Likes: 0

Stan

Are you reasonably happy with the result at last? - remind me what Turbo you have on

RB5Scott

What the **** happened to your power mate.... nice torque but the bhp just dont make sense... not the td05/06??

The Skylines Torque was pretty low but nice bhp - what are the mods - fairly low cost I guess to get to that power on a Skyline... not jealous about the fact that the classic shape scoob owners have to spend a wedge to get that sort of power - then again that was in the past......

May 16, 2004 | 07:58 PM

#203

RB5SCOTT

Scooby Regular

Joined: Jul 2000

Posts: 3,531

Likes: 0

Simple answer Steve! Not finished mapping yet

was expecting a little more though but i knew i would'nt be anywhere near 400bhp!

Once the new filter goes on we will finish the mapping

May 16, 2004 | 08:14 PM

#204

Fangoria

Scooby Regular

iTrader: (1)

Joined: Apr 2001

Posts: 1,841

Likes: 0

Scott

How difficult can the mapping be... I mean I've only had about 50hrs of mapping over the last 4 years!!!!

I've even had my car mapped at 10pm in the rain.... scary........

Wish I'd been there...even with Optimax I'd have well beaten 367bhp........ but then I didnt as I was not there... its fun driving a car with just rear brakes/hand brake....

Just contemplating selling the classic and going for the latest jap sti...... as they are so much better built and handle in standard so much better...what would you do??? - would lose a fortune on the 199sti5 and someone would get a bargin the amount of money and time I've put into it.... and its only has 41,000 miles on the clock...... wonder what a modded sti5 would get price wise

May 17, 2004 | 01:58 PM

#205

Miniman

Scooby Regular

iTrader: (2)

Joined: May 2002

Posts: 995

Likes: 1

Quote:

StanS - 424bhp/362lbs/ft - Full decat, K&N induction, FMIC
Pete - 421bhp/319lbs/ft - Skyline
RB5SCOTT - 367bhp/367lbs/ft
Fulham71 - 340bhp/328lbs/ft
Dovo - 331bhp/299lbs/ft - Supra
Riceboy - 327bhp/313lbs/ft
Fuz - 324bhp/312lbs/f
The Guru - 323bhp/294lbs/ft
p-j - 316bhp/269lbs/ft
LoFi - 309bhp/292lbs/ft MY01 WRX full decat, TD05, APS TM, Sti inj., U/R fuel pump & reg, ITG
Delboy2 - 307bhp/295lbs/ft - UK MY96 Wagon, Full Decat, Apexi Induction, FMIC etc etc
Hol - 299bhp/276lbs/ft - 98 Type R. Decat, Link ECU on 98ron Map and a set of headers its not mapped for (Oops!) Down on last time!
Taffr - 288bhp/280lbs/ft
Loony Toon - 283bhp/240lbs/ft - uk wrx my01, full de-cat, tech 3, uprated fuel pump, air filter and not a lot more
Terry Beast - 279bhp/253lbs/ft - P1 with full decat (or so I was told)
Q-Dog - 278bhp/255lbs/ft : MY98 2Dr Type R, Standard Jap import - Well happy on uk fuel
Mel - 274bhp/279lbs/ft - UK2000turbo Full de-cat,K&N panel filter,U/R Fuel Pump & Ecutek 2
Seb - 269bhp/269lbs/ft
Marklemac - 268bhp/259lbs/ft - MY02 STI PPP, STI Panel Filter, HKS SSQV. crap results.
Danbo - 267bhp/274lbs/ft - MY00 Aussie WRX (same as UK spec), Full Decat, ITG, Tek3
STB Butty - 264bhp/263lbs/ft - UK MY04 Wagon PPP
Pele - 263bhp/248lbs/ft - UK Turbo 2000, full de-cat, K&N, U/R fuel pump & reg etc.
Paul - 255bhp/237lbs/ft
V5 Man - 253bhp/225lbs/ft - UK Turbo MY95, full decat,Blitz Nur spec,STi filter,VTA DV.
Neilo - 252bhp/251lbs/ft - UK 03 WRX, backbox and filter (NON PPP, touch of Oct Booster though )
Terzo 228 - 250bhp/234lbs/ft - Scoobysport back box, Full de-cat, K&N57i, Forge D/V and some swissol for an extra 5 bhp

(down on power compared to pre-remap and downpipe fitting)
Miniman - 232bhp/235lbs/ft - MY02 WRX standard apart from an STI back box
Jay M A - 226bhp/239lbs/ft
Slo Mo - 138bhp/ - 2001 2l GX, Home made induction kit

I was quite pleased with 232bhp. The book standard is 218bhp. Not too bad IMO.

May 17, 2004 | 04:55 PM

#206

Jay m A

Scooby Regular

iTrader: (2)

Joined: May 2000

Posts: 8,626

Likes: 1

From: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton

StanS - 424bhp/362lbs/ft - Full decat, K&N induction, FMIC
Pete - 421bhp/319lbs/ft - Skyline
RB5SCOTT - 367bhp/367lbs/ft
Fulham71 - 340bhp/328lbs/ft
Dovo - 331bhp/299lbs/ft - Supra
Riceboy - 327bhp/313lbs/ft
Fuz - 324bhp/312lbs/f
The Guru - 323bhp/294lbs/ft
p-j - 316bhp/269lbs/ft
LoFi - 309bhp/292lbs/ft MY01 WRX full decat, TD05, APS TM, Sti inj., U/R fuel pump & reg, ITG
Delboy2 - 307bhp/295lbs/ft - UK MY96 Wagon, Full Decat, Apexi Induction, FMIC etc etc
Hol - 299bhp/276lbs/ft - 98 Type R. Decat, Link ECU on 98ron Map and a set of headers its not mapped for (Oops!) Down on last time!
Taffr - 288bhp/280lbs/ft
Loony Toon - 283bhp/240lbs/ft - uk wrx my01, full de-cat, tech 3, uprated fuel pump, air filter and not a lot more
Terry Beast - 279bhp/253lbs/ft - P1 with full decat (or so I was told)
Q-Dog - 278bhp/255lbs/ft : MY98 2Dr Type R, Standard Jap import - Well happy on uk fuel
Mel - 274bhp/279lbs/ft - UK2000turbo Full de-cat,K&N panel filter,U/R Fuel Pump & Ecutek 2
Seb - 269bhp/269lbs/ft
Marklemac - 268bhp/259lbs/ft - MY02 STI PPP, STI Panel Filter, HKS SSQV. crap results.
Danbo - 267bhp/274lbs/ft - MY00 Aussie WRX (same as UK spec), Full Decat, ITG, Tek3
STB Butty - 264bhp/263lbs/ft - UK MY04 Wagon PPP
Pele - 263bhp/248lbs/ft - UK Turbo 2000, full de-cat, K&N, U/R fuel pump & reg etc.
Paul - 255bhp/237lbs/ft
V5 Man - 253bhp/225lbs/ft - UK Turbo MY95, full decat,Blitz Nur spec,STi filter,VTA DV.
Neilo - 252bhp/251lbs/ft - UK 03 WRX, backbox and filter (NON PPP, touch of Oct Booster though )
Terzo 228 - 250bhp/234lbs/ft - Scoobysport back box, Full de-cat, K&N57i, Forge D/V and some swissol for an extra 5 bhp
Martin 850 - 249bhp/242lbs/ft - MY95 WRX with a full hks de-cat,MY02 tmic conversion, HKS SSQV and an uprated panel filter running 1bar of boost
SteveR - 242bhp/220lbs/ft ...MY99 UK turbo, Magnex straight through centre section and backbox, K&N panel, forge VTA, DIY mod to air intake, and Optimax
No-bars Krud - 241bhp/241lbs/ft
Scoobysnacks - 241bhp/214lbs/ft - decat from down pipe -miltek bbox induction kit- not very happy on results thought i get more on an import WRX
Stevenm2k - 239bhp/233lbs/ft - Full Decat, Tek3 , Poorly Motor (down on power compared to pre-remap and downpipe fitting)
Miniman - 232bhp/235lbs/ft - MY02 WRX standard apart from an STI back box
Jay M A - 226bhp/239lbs/ft - MY94 WRX Wagon, H&S 3" downpipe, Revolution 3" centre & backbox, Samco turbo hoses, K+N panel filter. Running with 1 cylinder water injection (head gasket going

)
Slo Mo - 138bhp/ - 2001 2l GX, Home made induction kit