M0NEY

I think i spoke to Rayman via email. Wasnt your fmic like £800??

I just spoke to disco at Impreziv. THey are currently trying to build a fmic for scoobys. They have built loads for skodas and now concentrating on the scoob.

He reckons the Skoda ones work out to about £600 but cause of the pipework on the scoob, it will work out to about £750 (but he could do it probably for £600 if there was enough interest).

FMICs are just bloody expensive!

What about a really good TMIC - i mean real good! Not like the STIs. One bigger. It obviously wont be as big as the fmic but then again, (as told by a good mate), it wont me laggy

Worth a thought

AndrewC

I can't believe that someone in the UK can't produce something like the APS/AVO/MRT topmount for far less money than it costs to import one from Australia!

I'm sure it would be a more popular option for people not wanting to go to a front mount if the price was more attractive.

Andrew...

DeanF

iTrader: (1)

I'll be up for one of those.

Dean

CyberScoob

Me too!!

manny

Might be worth speaking to the guys at allisport.com. I had a word with one of them at a land rover show recently and he was very interested in getting into the subaru intercooler scene. The products he had on display (although for land rovers) looked fantastic quality and reasonably priced....in fact he almost passed out when i told him how much a FMIC for a scoob was!!

AliG

My vote goes for a quality TMIC bigger and better that the STI 5/6 but designed to fit come on people it must possible

Ali G

Jay m A

iTrader: (2)

I would also like to see a TMIC that will replace the slanty ones on the older models, that cools as well as - if not better than the STI8 ones

maniac morgan

what jay said

Ive595

I too am a bit of a Land rover headcase, and as was reported here earlier, the upgrade intercoolers for Land rovers are a lot cheaper, I am looking at one at the moment that enables a 120bhp turbo diesel to run higher boost for 180bhp! Cost???? £250... fitted!!!
I shall be talking to the guys when they fit it and will take in the slanted intercooler I have to give them an idea.

Cheers

Ivan

Windows

Pics courtesy of rayman_2

Jolly Green Monster

iTrader: (4)

**** top mount!!

Someone start producing front mounts at a reasonable price..

JGM

Tone Loc

iTrader: (1)

Rayman.... looks very good .

Tony.

Windows

Yeh looks well good


Not having any luck with getting sizes for pipes etc.
Think what I do now is buy a FMIC and take mesurements from that!!

M0NEY

But rayman FMIC is about £850 (if its the one im thinking of)!

I can probably get Trust FMICS for about £750 but still, i want cheaper than that! lol

A very good TMIC wont have as much lag as the FMIC - wont it?

AndrewC

Sorry for the TMIC comment, seems to have got this off track somewhat, so I'll try to be more constructive.

As for pipe sizes, the norm is 2" from compressor to IC and 2.5" from IC to TB.

It would be interested to see Raymans I/C with the bumper back on as I seem to remember that the lower hole is about 700x180, I know Andy Forrest's (double core) I/C is approx 700x220x80, so 600x300x76 is not making best use of the available airflow.

I think the APS Type-R bar and plate design is worth looking at, I'm not sure about the size but looking at photos and the overall volume it's about 660*180 which again makes good use of the available area.

Andrew...

rayman_2

The pipes core thats runs on my system is 2" 1/2 from the turbo then going to a 3" back to the inlet. Pressure drop at the intercooler is 0.2psi at 15psi. Pressure tested to 80psi. The same intercooler is currently running on 700bhp syline no probs.

I am trying to get the pipework made in UK, to make it cheaper. Hard to get decent quality.

AndrewC

This has been quiet for 24hrs so I'll add some more input

How much power are we aiming to support with this FMIC?

Rayman, your FMIC has a volume of approx 13,600cm3, I'm not suprised it uses that size of pipework and can cool enough air for a 2.6L 700BHP engine.

IMHO that size core is just too big for a 2.0 making 350-400BHP.

The APS core is just over 9000cm3 and there are a few ~400BHP cars around running these.

Anyone know the dimensions of a std Evo 5 or 6 FMIC? They can also support 400+BHP (proven quite recently on a scoob I seem to remember) and are not that big.

Andrew...

AndrewC

I just noticed Tavia's comment on page 1:

If that really is the core size then it's 16,290cm3! That's a big intercooler and quite a lot bigger than the 600*300*75 that was originally stated at the top of the thread.

Andrew...

cswminty

Surely the bigger the better..it would allow for future development and tuning mods.

What would be the downside to a large intercooler - Fittment or would there be Lag probs ??

chrisgarner

hi guys
just a thought why! go down the diy route when you can get
a HKS.F.M.I which is good for 450= +bhp from a uk supplier.
for 735£ including delivery +vat for five units or
700£ including delivery + vat for ten units.
if you are interested give me a ring on 07957168548.or post your
names and i will sort it out or you can contact the
SUPPLIER DIRECT on 02 920709191.ask for stev or ken.
regards chris garner

chrisgarner

bttt

Paul_M

Bigger (in terms of volume rather than surface area) would mean more lag as there's more volume for the turbo to fill before the manifold pressure increases. Hence why a large FMIC isn't recommended with a TD04

CustomScoobyIOM

Im interested in all of that!! That HKS one sounds fantastic value in my opinion. Lemme know! jon.stokes@mea.gov.im just text you too

chrisgarner

top.

AndrewC

Oversizing the I/C will lead to increased lag as there is more air to pressurize in the system, oversizing the pipework will also increase the volume of air in the system and CAN lead to reduced flow velocity, although larger tubing will decrease the negative effects of flow restriction due to bends etc.

The quoted 0.2 psi pressure drop for rayman's I/C is exceptional, but pressure drop isn't everything. Look at the difference between the MY97/98 and MY99/00 OEM TMIC. The cores are the same volume and the 97/98 is the least restrictive of any TMIC fitted by the factory and yet it is far less effective as a cooler than the 99/00 unit which is one of the most restrictive.

As with everything there is a compromise, in this case bigger is only better upto a certain point.

Also a larger fmic takes up more space, requires more cutting of the bumper and potentially more complicated pipe runs.

Andrew...

M0NEY

Chrisgarner, sounds like you have got a good price on the HKS FMICs. I have been following the thread in general and its definitely done well.

I still wont pay that (well not yet) just in case there is a way to make it cheaper.

So i understand about all the lag with the FMIC. But if you get a bigger TMIC, will that still work well but with less lag? I dont know who does good TMIC - do APS do any?

David_Wallis

andrew the are some intercoolers bigger than hks and pace that dont need the bumper cutting...

Its down to design!

David

chrisgarner

to the top for sat pm.

chrisgarner

top

Windows

Starting to see what you guy's mean about it's not just as easy as all this!!

I'll try and get a sketch of the FMIC when it gets delivered and send the sketch down to AH for a price quote.