As soon as its done Ill send you R R before and after cheers alan

 

But it could be a couple of weeks before i get on a RR cheers alan

 

Hopefully getting remap done 9th march let you know as soon as poss after that cheers alan

 

no probs m8 whenever will suit me fine, i ain't going no where (car is being left in next week again for Adjustable fuel reg, knocklink and afr).

cheers

big sinky

 

Prodrive Chip and a Dawes in a Pre97 MY will be very close if not already detonating. Take the dawes OFF NOW !!!!!
It will more than likley be detonating if you are running more than 15psi.

Beleive me I know from experience...increasing the boost on Pre97 Prodrive fuel/Ignition Map = Detonation.

The Prodrive map is right on the limit of Detonation. If you really have to use a dawes, use it with the standard map (pull the chip out and add a wire link to the 'J1' position on the PCB)

Although low down will not be as good or as smooth on the standard map.

Get David to drop in a remapped chip... If it's the chip I think it is (15.5psi) it should give you about 260ft/lb of torque in a UK car, with improved spool up and timing retarded in the top quarter to prevent Detonation....

Hmmm.... I seem to know alot about this subject ....

 

I'd agree with everything Scott said... Prodrive map and increased boost = Det. My knocklink was lit up lick a Christmas tree!!!!!

Tony.

 

Thanks Scott and Tony Waiting to get pro drive chip of and a scoobyecu and knocklink fitted when David Wallis gets some more , Tony thanks for E Mail cheers alan

 

David Wallis yhm

 

Hi,

I have read through this thread and have to ask one thing, Will I be safe putting a Dawes device on MY99 uk turbo my mods are below.

Decat Centre
SS back box
Forge DV
ITG panel filter

If I am good to go I will need to buy metres to measure stats, I want to get hold of the Metres that Sit in that middle console up on the front dash(three metre's in a row), Where can I get them from? and Where canI get a dawes supplied and fitted?

Thanks

Ryan

P.S Sorry Alan for stepping in on your topic but this looks like a good place to put my question in.

 

Ryan, no props , for the Dawes you need to speak to Jamie Whitefeild see his posts well above this one hope this helps cheers alan

 

Thanks mate,

He sounds like he knows what its all about. I'll give him a little tinkle.

Ryan

 

BIG SINKY whats a shuck ??

 

SHUCK - northern ireland version of a ditch with or without a small stream running along it, or that 14 mile stretch of water that separates nothern ireland from scotland (larne-stranrar).

cheers

big sinky

 

B S hopefully remap NEXT weekend ??? still waiting for David to get the panal , When its done i will let you know, Then you my go over the shuck , lol now i know what it is , cheers alan

 

BS ,no fixed day for remap yet ??

 

no probs m8, like i said b4 i aint goin nowhere

cheers

big sinky

 

ANY CHANCE YET DAVID ,

 

Lol @ BS on modding !!!!

But so true

Les

 

.

 

Any one else on here do good remaps to better pro drive ???? for UK96 cheers alan

 

no one ??????

 

you still not got that motor of yours remapped yet. cmon m8 get the finger out i wanna see graphs and pie charts and figures etc. etc.

cheers

big sinky

 

BS still waiting for a call from the bloke who said he would do it in FEB??? BUT he is waiting for a call from his supplier and so it gos on , Going to be talking to some one at the weekend about different ECU cheers alan

 

Alan, you and about 10 other people.. (and you werent the first!)

Get another ecu if you want.. it will cost you aprox. 16.9 times as much, not including petrol to get to wherever its fitted.

Like I said Im waiting for my supplier, theres not really much I can do is there?

Dont really give a **** if people dont believe me.

David

 

David,

Spoke to Simon yetserday about a different matter , and mentioned ScoobyECU. He said that your boards were in the last stage of assembley, so you should get them soon.

Probably better to get the 27C0128's from Alex next time...

 

Alex?

27C1028s?

Some about?

There's a really easy way to cut those queues, raise the price by 50%.

I would just like to thank the people that have been patient, not bugged me, yet been happy when it's done.

Paul

 

50% narhh!! more like 150%-200%

 

Paul dont laugh.. but Im going to increase the price to £100.. it will save the stress..

Simon has just called and will have them tuesday.

Cheers Simon

David

 

David yhm,

 

What gains would I get putting new UP pipe on ?? cheers alan