Estimated Power???
#31
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Right just been speaking with David at lunch (over a pint of course) and i have to agree with him on the following.
Well i will be dead chuffed if i get 300bhp+ (the + being the chuffed bit)
Whereas i think David secretly is hoping for a shed load more.
I will not be happy unless i get over 300bhp at Well Lane on 27/10/2002.
Whereas i think David secretly is hoping for a shed load more.
#32
cold morning in october definatly
in the 290s would keep me very happy though especially as it only runs 16lbs of boost has 0 knock and runs very rich according to the deltadash and i have 18" wheels which apperently lose you 3 bhp over 17" wheels or 6bhp over 16" wheels
also i wont be going to expensive front mount bigger turbo etc.. so i am a very happy bunny
[Edited by X SOOOBY - 8/16/2002 3:45:41 PM]
in the 290s would keep me very happy though especially as it only runs 16lbs of boost has 0 knock and runs very rich according to the deltadash and i have 18" wheels which apperently lose you 3 bhp over 17" wheels or 6bhp over 16" wheels
also i wont be going to expensive front mount bigger turbo etc.. so i am a very happy bunny
[Edited by X SOOOBY - 8/16/2002 3:45:41 PM]
#34
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
P20SPD,
The Purse string holder said ..... "YES"!!!!
I must have been good last night
Will email you Monday to arrange either posting you a cheque etc or to pick it up next time I visit my Mum which is planned for three Wednesdays time..
Cheers
JGM
The Purse string holder said ..... "YES"!!!!
I must have been good last night
Will email you Monday to arrange either posting you a cheque etc or to pick it up next time I visit my Mum which is planned for three Wednesdays time..
Cheers
JGM
#35
No probs JGM, email work steven@volans.co.uk.
Christ i must change my home email, its too long.
ps i have screwed up my user name etc of P20SPD so hence the home bit.
[Edited by P20SPD@Home - 8/30/2002 3:30:10 PM]
Christ i must change my home email, its too long.
ps i have screwed up my user name etc of P20SPD so hence the home bit.
[Edited by P20SPD@Home - 8/30/2002 3:30:10 PM]
#37
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
JGM i received your mail, but then our mail server has stopped again, so apologies for any delay in getting back to you.
Sodding hell its just worked again, got your 2nd mail as i am typing, oh well.
steven
Sodding hell its just worked again, got your 2nd mail as i am typing, oh well.
steven
#43
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Update
current spec of my car.
my00 turbo
blitz induction
scoobysport downpipe
magnex centre
scoobysport backbox
tek2 (2nd ecu now) (peaking at 1.2 bar and settling between 1.2 and 1.1)
running optimax
next on list
1 Uprated fuel pump(here waiting to go on)
2 Samco hoses(to help with extra psi)
3 JWR quickshift and gear ****(i know no power increase)
4 APS twin dump valve (awaiting delivery)
5 AVO Coilover kit(i know no power increase)
6 Tim W's Up pipe (awaiting delivery)
7 APS FMIC (awaiting delivery)
8 VF22 hybrid turbo(awaiting delivery)
9 Knock link and AFR
10 Re-map of tek 2. (once the above are on the car)
will be changing the blitz induction kit back to my hks one, dont see the point of buying another kit just yet so will wait for the aps one.
Also, must put credit card and cheque book away, for my safety.
Looks I/David Wallis will be busy
Looking forward to Well Lane at end of October
current spec of my car.
my00 turbo
blitz induction
scoobysport downpipe
magnex centre
scoobysport backbox
tek2 (2nd ecu now) (peaking at 1.2 bar and settling between 1.2 and 1.1)
running optimax
next on list
1 Uprated fuel pump(here waiting to go on)
2 Samco hoses(to help with extra psi)
3 JWR quickshift and gear ****(i know no power increase)
4 APS twin dump valve (awaiting delivery)
5 AVO Coilover kit(i know no power increase)
6 Tim W's Up pipe (awaiting delivery)
7 APS FMIC (awaiting delivery)
8 VF22 hybrid turbo(awaiting delivery)
9 Knock link and AFR
10 Re-map of tek 2. (once the above are on the car)
will be changing the blitz induction kit back to my hks one, dont see the point of buying another kit just yet so will wait for the aps one.
Also, must put credit card and cheque book away, for my safety.
Looks I/David Wallis will be busy
Looking forward to Well Lane at end of October
#48
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Steven,
Just got home and I can happily say the ITG survive the postage ordeal without a problem.. it obviously enjoyed at it has leaked all over the packaging
Thanks again
JGM
Just got home and I can happily say the ITG survive the postage ordeal without a problem.. it obviously enjoyed at it has leaked all over the packaging
Thanks again
JGM
#56
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Update
current spec of my car.
my00 turbo
blitz induction
scoobysport downpipe
magnex centre
scoobysport backbox
tek2 (2nd ecu now) (peaking at 1.2 bar and settling between 1.2 and 1.1)
running optimax
Going on tonight
1 Fuel Pump(courtesey of Mr Wallis)
2 Forge Strut Brace(Whilst i wait for david)
next on list
3 JWR quickshift and gear ****(awaiting delivery)
4 APS twin dump valve (awaiting delivery)
5 AVO Coilover kit(awaiting delivery)
6 Tim W's Up pipe (awaiting delivery)
7 APS FMIC (awaiting delivery)
8 VF22 hybrid turbo(awaiting delivery)
9 Knock link and AFR
10 New Ecu or remap??????. (once the above are on the car)
current spec of my car.
my00 turbo
blitz induction
scoobysport downpipe
magnex centre
scoobysport backbox
tek2 (2nd ecu now) (peaking at 1.2 bar and settling between 1.2 and 1.1)
running optimax
Going on tonight
1 Fuel Pump(courtesey of Mr Wallis)
2 Forge Strut Brace(Whilst i wait for david)
next on list
3 JWR quickshift and gear ****(awaiting delivery)
4 APS twin dump valve (awaiting delivery)
5 AVO Coilover kit(awaiting delivery)
6 Tim W's Up pipe (awaiting delivery)
7 APS FMIC (awaiting delivery)
8 VF22 hybrid turbo(awaiting delivery)
9 Knock link and AFR
10 New Ecu or remap??????. (once the above are on the car)
#57
Big thankyou to David for fitting the fuel pump, he did take some pictures as there is a difference between mine, the uprated one(obviously) and davids(older car), see new thread in drivetrain.
Strut brace..............when david stops laughing he will probably start laughing again reading this.
Lets just say i went with big smile and said "look at that" as David took the strut brace out of the car. "Looks very good, might get one" says David, praise indeed.
So whilst david is doing fuel pump i do the strut brace, whilst still in my work suit, come to put it on, fits on drivers side nicely and, oh......its crudely hovering over the washer bottle on the pasenger side.
Bllx they, forge that is, must have sent me the wrx one and not the classic, will have to have a word with Jamie who i ordered it from.
Lets just say it pissed on my bonfire
Strut brace..............when david stops laughing he will probably start laughing again reading this.
Lets just say i went with big smile and said "look at that" as David took the strut brace out of the car. "Looks very good, might get one" says David, praise indeed.
So whilst david is doing fuel pump i do the strut brace, whilst still in my work suit, come to put it on, fits on drivers side nicely and, oh......its crudely hovering over the washer bottle on the pasenger side.
Bllx they, forge that is, must have sent me the wrx one and not the classic, will have to have a word with Jamie who i ordered it from.
Lets just say it pissed on my bonfire
#58
Steven,
you need to get a dump valve like mine - at track days they say - who's car is that that sounds like a cross between a jet plane and a WRC car - it chatters as I change gear -
You know you want to - and I can get one for you cheap, you tight Yorkshire farmer you
Trout
you need to get a dump valve like mine - at track days they say - who's car is that that sounds like a cross between a jet plane and a WRC car - it chatters as I change gear -
You know you want to - and I can get one for you cheap, you tight Yorkshire farmer you
Trout
#59
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Still LMFAO... i should have seen if it fitted mine.. I would have given jamie money for it if it did...
Edited cos I was pissed and couldnt type...
David
[Edited by David_Wallis - 8/31/2002 9:42:33 AM]
Edited cos I was pissed and couldnt type...
David
[Edited by David_Wallis - 8/31/2002 9:42:33 AM]
#60
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Thought it was funny myself, they are only human you know. Spoke with Jamie and he is sorting it. Definately for the WRX, its wider, so dont think it would have fit yours!
He did ask if you wanted one ordering as well though
Trout, see how i go with the aps DV when that comes, if i dont like it i will come and see you.
He did ask if you wanted one ordering as well though
Trout, see how i go with the aps DV when that comes, if i dont like it i will come and see you.