What mods have you done this week?
#781
Scooby Regular
A few jobs this weekend, fitted a rear defuser from HT Autos good quality and a good fit, i would recommend theses, also fit my new LED side indicators also great quality and no silly orange bulb showing
#782
Scooby Regular
#783
Scooby Regular
Hi Waterboy, yes if you want it solid, i drilled a couple of 4mm holes and before i put the bolts through i put lots of copperslip through the holes and around the bolts , im not concerned about it rusting now, ,
#784
Scooby Regular
The following 4 users liked this post by Itamar_M:
The following users liked this post:
The following users liked this post:
The following users liked this post:
#794
Scooby Regular
#796
#799
Scooby Regular
The following users liked this post:
#800
Unfortunately the previous owner broke the OEM ones internally so they wouldn't adjust for the MOT. Had to replace them and OEM is like £300 each for decent ones! So I opted for these for £200 brand new and have been thinking ever since about how to make them look o.k. lol.
#801
Scooby Regular
iTrader: (2)
Finally fitted my oil temp sensor above cylinder 3.
not sure if my wife is super strong or if I loosened it for her but we got it off.
While installing I used maths to clean out the intercooler and brake cleaner to clean the breather pipes out. Quite a lot of gunk in one end.
Also spent an hour cleaning the engine bay while the cooler was off.
only kicker is I knocked the spacer that the intercooler bolts to off and can't locate it.
I love tackling jobs and it all working. The car fired up quicker than ever. Maybe the meth vapour helps?
One sensor to go
Before the clean
After the cleaning - notice the intercooler bolt.
Before rhe clean
New adaptor in
Quarter of a turn at a time
Always protect the important bits
not sure if my wife is super strong or if I loosened it for her but we got it off.
While installing I used maths to clean out the intercooler and brake cleaner to clean the breather pipes out. Quite a lot of gunk in one end.
Also spent an hour cleaning the engine bay while the cooler was off.
only kicker is I knocked the spacer that the intercooler bolts to off and can't locate it.
I love tackling jobs and it all working. The car fired up quicker than ever. Maybe the meth vapour helps?
One sensor to go
Before the clean
After the cleaning - notice the intercooler bolt.
Before rhe clean
New adaptor in
Quarter of a turn at a time
Always protect the important bits
The following users liked this post:
#804
Scooby Regular
Hi all, thought i would remove the old centre pipe today and replaced it with a straight through stainless steel one, sounds a lot better in my opinion ,
The following users liked this post:
#807
Scooby Regular
what brand did you go for?
how loud has it made it? (I’ve got zero cats)
The following users liked this post:
#809