What mods have you done this week?
#602
if you need another badge i have a pink and black one.
It looked much better imagining it in my head.
I must admit, I wasn't as excited as I thought I would be when seeing the final result for the first time.
The next exterior mod in line are the Morette headlights which should complete the look (or at least so I hope).
So time will tell if the mesh grille was a right move or not.
I apologize for the bed pictures
I must admit, I wasn't as excited as I thought I would be when seeing the final result for the first time.
The next exterior mod in line are the Morette headlights which should complete the look (or at least so I hope).
So time will tell if the mesh grille was a right move or not.
I apologize for the bed pictures
#605
Scooby Regular
Zunsport do them in black. Mine have been on nearly two years now and still look as good as the day i got them. The quality of the zunsport ones is brilliant.
The following users liked this post:
#608
Scooby Regular
The following users liked this post:
The following users liked this post:
#610
Ah seen those on eBay. Stop doors getting dented in.
Originally Posted by RickyP
There is some lovely blobeye morettes for sale in the classified
Also - any opinions on the Zunsport lower grills? - Good quality any alternatives, I want black like this ..
Also - any opinions on the Zunsport lower grills? - Good quality any alternatives, I want black like this ..
Originally Posted by ray54
The following users liked this post:
#617
Scooby Regular
#619
Scooby Regular
#621
Scooby Regular
New front strut brace
Fitted a new front strut brace after finally finding one that fits over my top mount!. Ultra racing sell some nice bits actually!.
The following users liked this post:
#622
Scooby Regular
hks hi power 76 mm cat back with little polishing (braces will change stainless one again previous owner did something wrong)
Last edited by semih; 20 January 2020 at 08:53 AM.
#624
Scooby Regular
iTrader: (2)
New battery clamp
Since getting my hawk the positive battery terminal wouldn't tighten leaving the clamp loose. The only fix was to put a screw in it to tighten it.
Worked forever until someone in Russia sold me one for £11 delivered. So much cheaper then Subaru and I really don't like fitting second hand if I can help it.
Literally a 5 minute job.
Worked forever until someone in Russia sold me one for £11 delivered. So much cheaper then Subaru and I really don't like fitting second hand if I can help it.
Literally a 5 minute job.
#625
Scooby Regular
iTrader: (2)
My DAB signal is truly shocking and someone mentioned that the sticky copper section needs to stick to metal. I didn't realise this but went to tackle it today.
I can't stick the aerial any higher up and therefore can not stick the copper section to the roof of the car. It's just not long enough.
A quick think and wrapped the copper in tin foil and joined it to a long section above the headlining.
It's better then it was but still drops out.
Anyone else have a dab working?
I can't stick the aerial any higher up and therefore can not stick the copper section to the roof of the car. It's just not long enough.
A quick think and wrapped the copper in tin foil and joined it to a long section above the headlining.
It's better then it was but still drops out.
Anyone else have a dab working?
#626
Scooby Regular
My DAB signal is truly shocking and someone mentioned that the sticky copper section needs to stick to metal. I didn't realise this but went to tackle it today.
I can't stick the aerial any higher up and therefore can not stick the copper section to the roof of the car. It's just not long enough. (use the sun visor screw)
A quick think and wrapped the copper in tin foil and joined it to a long section above the headlining.
It's better then it was but still drops out.
Anyone else have a dab working?
I can't stick the aerial any higher up and therefore can not stick the copper section to the roof of the car. It's just not long enough. (use the sun visor screw)
A quick think and wrapped the copper in tin foil and joined it to a long section above the headlining.
It's better then it was but still drops out.
Anyone else have a dab working?
https://www.dabonwheels.co.uk/produc...mount-aerials/
I see where you are coming from, just solder a length of wire to it and connect the other end to earth.
Maybe the orientation is wrong or you need an amplified aerial
Last edited by Don Clark; 23 January 2020 at 11:13 PM.
#630
Scooby Regular
iTrader: (2)
some american site over a year a year always liked the sti logo on the number plate section and then found the japanese style hanger on Ebay
ablut £30 for both bits
Similar to this
https://www.wish.com/m/c/5bee7db78719dd1723e9ab73?hide_login_modal=true&fro m_ad=goog_shopping&_display_country_code=GB&_force _currency_code=GBP&pid=googleadwords_int&c=%7Bcamp aignId%7D&ad_cid=5bee7db78719dd1723e9ab73&ad_cc=GB &ad_curr=GBP&ad_price=6.00&campaign_id=8163884845& gclid=CjwKCAiA1fnxBRBBEiwAVUouUnRM7F7VfBDf-wM_WQZpJF1EKeWzcv_CPmOTBeJZIE_q2xWV3udAHRoCbeQQAvD _BwE
Mounted the sti plaque using the top holes and hindge the plate.
I think it looks better in the hole.
ablut £30 for both bits
Similar to this
https://www.wish.com/m/c/5bee7db78719dd1723e9ab73?hide_login_modal=true&fro m_ad=goog_shopping&_display_country_code=GB&_force _currency_code=GBP&pid=googleadwords_int&c=%7Bcamp aignId%7D&ad_cid=5bee7db78719dd1723e9ab73&ad_cc=GB &ad_curr=GBP&ad_price=6.00&campaign_id=8163884845& gclid=CjwKCAiA1fnxBRBBEiwAVUouUnRM7F7VfBDf-wM_WQZpJF1EKeWzcv_CPmOTBeJZIE_q2xWV3udAHRoCbeQQAvD _BwE
Mounted the sti plaque using the top holes and hindge the plate.
I think it looks better in the hole.
Last edited by RobsyUK; 08 February 2020 at 06:38 PM.