Classic/Type R bits - NEW PARTS UPDATED 20/2/16
#66
Scooby Regular
iTrader: (2)
Join Date: Mar 2012
Location: somerset
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
Air on the side of caution dealing with this guy, he's quite volatile!
[QUOTE=tom-r33]Thankyou. I didnt realise how far you were from me!
I will be travelling to france at the end of march, so will be passing close by your place, is it ok to collect the bits then? And leave a deposit now?
Can you confirm the rear end is R180?
Cheers
[QUOTE=timmy2take]Really??
FFS I had to struggle getting that into the car myself as my mechanic is away and you said you wanted it this week. Then had to struggle again getting it out of the car by myself as no one was around during the day to help me get it out and then had to go to work, so couldn't leave it in my car.
I'm not going to be selling it to you now.
*****
[QUOTE=tom-r33]Thankyou. I didnt realise how far you were from me!
I will be travelling to france at the end of march, so will be passing close by your place, is it ok to collect the bits then? And leave a deposit now?
Can you confirm the rear end is R180?
Cheers
[QUOTE=timmy2take]Really??
FFS I had to struggle getting that into the car myself as my mechanic is away and you said you wanted it this week. Then had to struggle again getting it out of the car by myself as no one was around during the day to help me get it out and then had to go to work, so couldn't leave it in my car.
I'm not going to be selling it to you now.
*****
#68
20 PMs from you, so 40 back and fourth.
When my location is on my 1st post (yes I can post all your messages up too to try and make you look silly too)
It's also in my 1st PM to you too.
If you had to try and lug that part yourself into and out of the car yourself (A good 10 stone for a rear hubs, shafts and brakes still assembled) as my mechanic was away so no one to help me, to be let down and now have it sitting around at my house for a month, you'd be pretty pissed off too.
Get off my post you time wasting ****.
[QUOTE=tom-r33;11801664]Air on the side of caution dealing with this guy, he's quite volatile!
[QUOTE=tom-r33]Thankyou. I didnt realise how far you were from me!
I will be travelling to france at the end of march, so will be passing close by your place, is it ok to collect the bits then? And leave a deposit now?
Can you confirm the rear end is R180?
Cheers
When my location is on my 1st post (yes I can post all your messages up too to try and make you look silly too)
It's also in my 1st PM to you too.
If you had to try and lug that part yourself into and out of the car yourself (A good 10 stone for a rear hubs, shafts and brakes still assembled) as my mechanic was away so no one to help me, to be let down and now have it sitting around at my house for a month, you'd be pretty pissed off too.
Get off my post you time wasting ****.
[QUOTE=tom-r33;11801664]Air on the side of caution dealing with this guy, he's quite volatile!
[QUOTE=tom-r33]Thankyou. I didnt realise how far you were from me!
I will be travelling to france at the end of march, so will be passing close by your place, is it ok to collect the bits then? And leave a deposit now?
Can you confirm the rear end is R180?
Cheers
Originally Posted by timmy2take
Really??
FFS I had to struggle getting that into the car myself as my mechanic is away and you said you wanted it this week. Then had to struggle again getting it out of the car by myself as no one was around during the day to help me get it out and then had to go to work, so couldn't leave it in my car.
I'm not going to be selling it to you now.
*****
FFS I had to struggle getting that into the car myself as my mechanic is away and you said you wanted it this week. Then had to struggle again getting it out of the car by myself as no one was around during the day to help me get it out and then had to go to work, so couldn't leave it in my car.
I'm not going to be selling it to you now.
*****
#70
Have u got the pink badge off the front grill?
On a side note are you side quarter decals original and the wrx on the boot. I mite just ask for a close up pic as im ordering them for mine and its hard to find which colour etc.
On a side note are you side quarter decals original and the wrx on the boot. I mite just ask for a close up pic as im ordering them for mine and its hard to find which colour etc.
#76
How much for the badge posted to southern ireland?
I have paypal.
no all i need is a few pics of the decals as im after coming across a few sellers selling copies and some say sti writing in white more say pink. And the shaded side stickers are hard to find in shaded . If i had a few close up pics of originals that would be great.
QUOTE=timmy2take;11801864]Hi, yes got the pink badge.
Original decals on the boot and the rear quarters, although not sure how they'd be of any use to you?[/QUOTE]
I have paypal.
no all i need is a few pics of the decals as im after coming across a few sellers selling copies and some say sti writing in white more say pink. And the shaded side stickers are hard to find in shaded . If i had a few close up pics of originals that would be great.
QUOTE=timmy2take;11801864]Hi, yes got the pink badge.
Original decals on the boot and the rear quarters, although not sure how they'd be of any use to you?[/QUOTE]
#79
Scooby Regular
iTrader: (2)
Join Date: Mar 2012
Location: somerset
Posts: 598
Likes: 0
Received 0 Likes
on
0 Posts
I asked you 3 questions in the last PM and you did not answer a single one of them
You did manage to insult me though. That's twice now.
The questions were based on information obtained in the thread where you stated you were happy for people to leave deposits if collected by the end of March (edited and gone now ). I was asking if this was acceptable in my case, and it obviously was not. So, why not just say that?
IF you had done as requested which was to leave the bits in 2 'sub-assemblies' (1 rear hub assembled with 1 rear driveshaft and 1 brake set) I would have been able to send my driver in her small van. She would have still struggled a little but I know she can manage that weight and size.
BUT, as you decided to leave the rear subframe, arms, hubs, shafts and brakes as 1 unit I could not send her as I had doubts it would fit and that she would be able to lift it, so I had to try and arrange an alternative, given the size and weight of the assembly I was not happy to send somebody as I may be held liable if an injury occured, so I was left with no real option other than to come myself. As i'm pretty busy, personally finding a 7 hour window is quite hard and is not an economical use of my time.
If you read back through the PM's you'll see that I was happy to wait until your mechanic got back so that HE could sort it out and at NO point did I say 'I need them now'. (Although I did have a customer waiting at the time I have since sourced elsewhere)
I then received an unexpected message saying I hope these are the bits you want' and a picture of it sat outside. I wasn't expecting anything to happen until your mechanic got back so why did you feel you had to go and get it yourself?
You've gone from having a sale where we were trying to come to a mutual arrangement about collection, to now having the bits sat outside your house indefinitely......
You did manage to insult me though. That's twice now.
The questions were based on information obtained in the thread where you stated you were happy for people to leave deposits if collected by the end of March (edited and gone now ). I was asking if this was acceptable in my case, and it obviously was not. So, why not just say that?
IF you had done as requested which was to leave the bits in 2 'sub-assemblies' (1 rear hub assembled with 1 rear driveshaft and 1 brake set) I would have been able to send my driver in her small van. She would have still struggled a little but I know she can manage that weight and size.
BUT, as you decided to leave the rear subframe, arms, hubs, shafts and brakes as 1 unit I could not send her as I had doubts it would fit and that she would be able to lift it, so I had to try and arrange an alternative, given the size and weight of the assembly I was not happy to send somebody as I may be held liable if an injury occured, so I was left with no real option other than to come myself. As i'm pretty busy, personally finding a 7 hour window is quite hard and is not an economical use of my time.
If you read back through the PM's you'll see that I was happy to wait until your mechanic got back so that HE could sort it out and at NO point did I say 'I need them now'. (Although I did have a customer waiting at the time I have since sourced elsewhere)
I then received an unexpected message saying I hope these are the bits you want' and a picture of it sat outside. I wasn't expecting anything to happen until your mechanic got back so why did you feel you had to go and get it yourself?
You've gone from having a sale where we were trying to come to a mutual arrangement about collection, to now having the bits sat outside your house indefinitely......
#82
I asked you 3 questions in the last PM and you did not answer a single one of them
You did manage to insult me though. That's twice now.
The questions were based on information obtained in the thread where you stated you were happy for people to leave deposits if collected by the end of March (edited and gone now ). I was asking if this was acceptable in my case, and it obviously was not. So, why not just say that?
IF you had done as requested which was to leave the bits in 2 'sub-assemblies' (1 rear hub assembled with 1 rear driveshaft and 1 brake set) I would have been able to send my driver in her small van. She would have still struggled a little but I know she can manage that weight and size.
BUT, as you decided to leave the rear subframe, arms, hubs, shafts and brakes as 1 unit I could not send her as I had doubts it would fit and that she would be able to lift it, so I had to try and arrange an alternative, given the size and weight of the assembly I was not happy to send somebody as I may be held liable if an injury occured, so I was left with no real option other than to come myself. As i'm pretty busy, personally finding a 7 hour window is quite hard and is not an economical use of my time.
If you read back through the PM's you'll see that I was happy to wait until your mechanic got back so that HE could sort it out and at NO point did I say 'I need them now'. (Although I did have a customer waiting at the time I have since sourced elsewhere)
I then received an unexpected message saying I hope these are the bits you want' and a picture of it sat outside. I wasn't expecting anything to happen until your mechanic got back so why did you feel you had to go and get it yourself?
You've gone from having a sale where we were trying to come to a mutual arrangement about collection, to now having the bits sat outside your house indefinitely......
You did manage to insult me though. That's twice now.
The questions were based on information obtained in the thread where you stated you were happy for people to leave deposits if collected by the end of March (edited and gone now ). I was asking if this was acceptable in my case, and it obviously was not. So, why not just say that?
IF you had done as requested which was to leave the bits in 2 'sub-assemblies' (1 rear hub assembled with 1 rear driveshaft and 1 brake set) I would have been able to send my driver in her small van. She would have still struggled a little but I know she can manage that weight and size.
BUT, as you decided to leave the rear subframe, arms, hubs, shafts and brakes as 1 unit I could not send her as I had doubts it would fit and that she would be able to lift it, so I had to try and arrange an alternative, given the size and weight of the assembly I was not happy to send somebody as I may be held liable if an injury occured, so I was left with no real option other than to come myself. As i'm pretty busy, personally finding a 7 hour window is quite hard and is not an economical use of my time.
If you read back through the PM's you'll see that I was happy to wait until your mechanic got back so that HE could sort it out and at NO point did I say 'I need them now'. (Although I did have a customer waiting at the time I have since sourced elsewhere)
I then received an unexpected message saying I hope these are the bits you want' and a picture of it sat outside. I wasn't expecting anything to happen until your mechanic got back so why did you feel you had to go and get it yourself?
You've gone from having a sale where we were trying to come to a mutual arrangement about collection, to now having the bits sat outside your house indefinitely......
From the PM's you have said bugger when I couldn't do this Friday or Saturday. So I was off work and went and collected it, as I thought you were in need of it.
I overlooked the 2 sub assembly bits, with all my messages I've had from here, facebook, as well as work I've got lost with all the messages so I asked you was it rear hubs, shafts & brakes and you said yes. Apologies again.
And apologies for being rude, I'm not having a great time with it at the moment, still not been paid out on the car for over a month now. But that doesn't mean I should of been rude to you.
I've had so many time wasters, I could write a book about it.
Right onwards and upwards.