Vaping - Electronic Cigarettes
Nah been running it at 8.5-9W, with all the coils i've tried bar the 1st one the flavour just goes after a day. The 1st coil was good for 5 days. I must have a duff batch of coils. Plus sometimes the air control leaks, the o-ring inside must be nicked or something.
I can't remember but is the twisty air control ring supposed to stop turning at some point?
I can't remember but is the twisty air control ring supposed to stop turning at some point?
When you refill, before you put the battery on, cover the drip tip with a tissue point the tip down and flick it vigorously a few times - I'm sure you're well practiced at flicking the wrist. It clears the coil and chimney, used to have to do it frequently with the early coils.
Why don't you return the tank to where ever you got it from and ask for a full replacement, not just a replacement part.
Last edited by Rob_Impreza99; Dec 15, 2014 at 10:58 PM.
Yea could be the coils but i think the air control valve is also knackered, resulting in an overall sh1tty vape. My liquids are burning alot quicker too.
Also there's some small bubbles in the tank, after a vape, that aint right lol.
Its very strange, put an old coil back in and its 2ohms use to be 1.9 put the new one in its reading 3.8-4ohms, something is definitely fecked. Hopefully the new air control valve piece will solve it. I doubt its the tank as that has nothing that can go wrong really and just screws on top.
Also there's some small bubbles in the tank, after a vape, that aint right lol.
Its very strange, put an old coil back in and its 2ohms use to be 1.9 put the new one in its reading 3.8-4ohms, something is definitely fecked. Hopefully the new air control valve piece will solve it. I doubt its the tank as that has nothing that can go wrong really and just screws on top.
Last edited by bioforger; Dec 15, 2014 at 11:29 PM.
Yea could be the coils but i think the air control valve is also knackered, resulting in an overall sh1tty vape. My liquids are burning alot quicker too.
Also there's some small bubbles in the tank, after a vape, that aint right lol.
Its very strange, put an old coil back in and its 2ohms use to be 1.9 put the new one in its reading 3.8-4ohms, something is definitely fecked. Hopefully the new air control valve piece will solve it. I doubt its the tank as that has nothing that can go wrong really and just screws on top.
Also there's some small bubbles in the tank, after a vape, that aint right lol.
Its very strange, put an old coil back in and its 2ohms use to be 1.9 put the new one in its reading 3.8-4ohms, something is definitely fecked. Hopefully the new air control valve piece will solve it. I doubt its the tank as that has nothing that can go wrong really and just screws on top.
If anyone else is reading this please don't let it put you off, most people just buy them, use them and they work great.
Eh? because its leaking sometimes, duh. There are o-rings in there Jack, they could have failed, as you said yourself
causing the liquid to go past the coil or through it.
causing the liquid to go past the coil or through it.
Yeah I suppose it's possible, just unlikely, the liquid is held in by vacuum, there's a big hole from the wick to the battery, much bigger than a knick in an o-ring.
So if it isn't that, it's just a duff batch of coils then, it can't be anything else right? Or is there anything that could cause this massive fail just with the tank?
Definitely incompetence then. Nah, I've had a bad pack before, they were the original coils though, binned them.
Scooby Regular
iTrader: (2)
Joined: Apr 2004
Posts: 15,029
Likes: 0
From: Somewhere in Kent, sniffing some V-Power
Got an EMOW mega from a local store last week. Very impressed so far.
I'm thinking of getting a spare battery, can you use an IPOW2 battery on my exisiting clearomizer?
Or shall I just get an IPOW 2 as well?
I'm thinking of getting a spare battery, can you use an IPOW2 battery on my exisiting clearomizer?
Or shall I just get an IPOW 2 as well?
Yea thanks for that. I bought mine weeks before you did. So you can't rule it out at all. Anyway mine are 1.8ohm ones, yours are 1.5's !
Last edited by bioforger; Dec 16, 2014 at 03:03 PM.
Their might be a slight quirk with the Ipow2 battery, but in a decent way. When you charge it you wait till the battery indicator is full then unplug it, that's what ive been doing. From a full charge the first 2 bars were going fairly quickly, i was getting around 10hrs from a full charge.
The other day i left it on charge for approx 30 - 40 mins after it would have normally had a full charge, that was by accident as occasionally you forget by 10 or 15 mins here and there, normally leaving these type of batteries on charge for longer than is recommended isn't good.
Anyway, the first bar lasted quite a bit longer than it normally does, so did the 2nd bar. I got approx 4 - 6 hrs longer from the battery than when i was taking it off the charger after it was saying it was fully charged. Maybe the charge indicator isn't the most accurate, it could be that it's not fully charged even though the LED screen is saying it is. Something that backs that up is i got a lot longer from the battery out of the box from a factory charge than i did from a standard charge, going off the battery full indicator when it was charging.
The other day i left it on charge for approx 30 - 40 mins after it would have normally had a full charge, that was by accident as occasionally you forget by 10 or 15 mins here and there, normally leaving these type of batteries on charge for longer than is recommended isn't good.
Anyway, the first bar lasted quite a bit longer than it normally does, so did the 2nd bar. I got approx 4 - 6 hrs longer from the battery than when i was taking it off the charger after it was saying it was fully charged. Maybe the charge indicator isn't the most accurate, it could be that it's not fully charged even though the LED screen is saying it is. Something that backs that up is i got a lot longer from the battery out of the box from a factory charge than i did from a standard charge, going off the battery full indicator when it was charging.
Another new tank the other day
,new kanger subtank. Comes with 2 coils,one sub ohm at 0.5ohm and another at 1.2ohm. Both work very well,of course more of an instant hit with the sub coil. Options of rebuild-able coils too,so best of both worlds in a package.



Spare screws,japanese cotton,2 ready made coils and 2 BDCs

Next to the delta tank for size

On the ody vv


3 air hole options(1-3) and 6ml of fluid with the BDC coils(the buildable fits in a housing so takes up more space)
,new kanger subtank. Comes with 2 coils,one sub ohm at 0.5ohm and another at 1.2ohm. Both work very well,of course more of an instant hit with the sub coil. Options of rebuild-able coils too,so best of both worlds in a package.


Spare screws,japanese cotton,2 ready made coils and 2 BDCs

Next to the delta tank for size

On the ody vv


3 air hole options(1-3) and 6ml of fluid with the BDC coils(the buildable fits in a housing so takes up more space)
Its ok the Ipow2 but as i suspected it doesn't last as long as my other 2 batteries, because of its display which sucks the batt life on its own. It lasts long enough though. I'm doing the same as you as it didn't seem to take as long as the others to do a full charge going by the display, so i also leave it going a bit longer. It's pretty quick to charge either way.
Last edited by bioforger; Dec 16, 2014 at 07:29 PM.
Another new tank the other day
,new kanger subtank. Comes with 2 coils,one sub ohm at 0.5ohm and another at 1.2ohm. Both work very well,of course more of an instant hit with the sub coil. Options of rebuild-able coils too,so best of both worlds in a package.
3 air hole options(1-3) and 6ml of fluid with the BDC coils(the buildable fits in a housing so takes up more space)

,new kanger subtank. Comes with 2 coils,one sub ohm at 0.5ohm and another at 1.2ohm. Both work very well,of course more of an instant hit with the sub coil. Options of rebuild-able coils too,so best of both worlds in a package.3 air hole options(1-3) and 6ml of fluid with the BDC coils(the buildable fits in a housing so takes up more space)

Too huge. This is looking like it might be my next battery and that thing would dwarf it http://www.cloupor.com/cloupor-mini-...x-mod-for-sale
Scooby Regular
iTrader: (2)
Joined: Apr 2004
Posts: 15,029
Likes: 0
From: Somewhere in Kent, sniffing some V-Power
Me too, that looks perfect.
Considering getting another Kanger but I might get the IPOW 2 instead as it has a larger battery and clearomizer.
One thing I have found after doing a little more research is that a lot of people seem to prefer the single coil vaporizers as opposed to dual coil.
Are there single coils available for the Imow and IPow? Just want to give them a try.
Considering getting another Kanger but I might get the IPOW 2 instead as it has a larger battery and clearomizer.
One thing I have found after doing a little more research is that a lot of people seem to prefer the single coil vaporizers as opposed to dual coil.
Are there single coils available for the Imow and IPow? Just want to give them a try.
Trust me these dual coils are a lot better than the old style. I used them for a good 8 months and they did the job but they all gurgle and leak eventually. Buy an EVOD if you want to try, they're cheap http://myepack.co.uk/review/product/...8/category/17/
Scooby Regular
iTrader: (2)
Joined: Apr 2004
Posts: 15,029
Likes: 0
From: Somewhere in Kent, sniffing some V-Power
Trust me these dual coils are a lot better than the old style. I used them for a good 8 months and they did the job but they all gurgle and leak eventually. Buy an EVOD if you want to try, they're cheap http://myepack.co.uk/review/product/...8/category/17/
My local shop has hundreds of flavours and the best bit is, I can try before I buy.
One small issue with my emow though is that is has started to 'pop'. Does it just need a clean under the tap?
No popping is pefectly normal. I wouldn't recommend cleaning with water now i know better, it doesn't do the wicks much good at all and takes a while for the wick to "pickup" the juice properly again, unless you really dry it out overnight. Better to dry burn it whilst blowing air over it through the airholes. Or simply just replace the coil.
Scooby Regular
iTrader: (2)
Joined: Apr 2004
Posts: 15,029
Likes: 0
From: Somewhere in Kent, sniffing some V-Power
No popping is pefectly normal. I wouldn't recommend cleaning with water now i know better, it doesn't do the wicks much good at all and takes a while for the wick to "pickup" the juice properly again, unless you really dry it out overnight. Better to dry burn it whilst blowing air over it through the airholes. Or simply just replace the coil.
They are cheap enough aren't they.
I'm just in two minds on whether to buy a complete spare unit, ie the IPOW Mega 2, or just a spare battery.






