Correct crank pulley version
#1
Scooby Newbie
Thread Starter
Join Date: Nov 2005
Location: Aberdeen
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Correct crank pulley version
Decided to change the crank pulley on my car due to some damage front which made it look like it was wobbling when running. The engine was built from an STi v3 Ej20k. Here's a picture of the removed pulley:
I ordered a secondhand replacement from a breakers but, although the outer dimensions appear to be the same, the design is different with the centre cavity filled with a rubber section, Same as the pic below. Just wanted to check if this one is ok to fit or whether is from a different model?
h
I ordered a secondhand replacement from a breakers but, although the outer dimensions appear to be the same, the design is different with the centre cavity filled with a rubber section, Same as the pic below. Just wanted to check if this one is ok to fit or whether is from a different model?
h
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM