Can anyone give me any advice on how to remove my door handles to colour code?

Thanks.

Remove door card: screw under cover at front, another in the pull handle. Release clips along base and front, lift card and pull towards you.

Lever up window switch from rear, and unclip wiring.

Unclip surround to inside handle, it's on four clips, they pull outwards.

Pull polythene sheet away from glue at top corner, undo two nuts behind dooor handle.

Release latching mechanism: plastic clip, coloured green fastened onto pull rod, on mine. Door handle now comes away from outside. DON'T lose that plastic clip.

Don't forget to use a plastic primer, and don't colour code the soft plastic base plate, the paint doesn't take on it.;)

Alcazar

Nice one thank you very much!

how about like this :)

http://i2.photobucket.com/albums/y9/cswminty/Minty%20RA/driverside.jpg

:thumb: