.. Can anyone shed any light on this please.

Looking to change from my Godspeed 330 4 pot on my MY01 WRX to STi 8 Brembos.
With the god speeds you have to tap n die the hubs, Can you still use these new sized holes with the Newage Brembos.

Thanks

Ricey

 

You can go back to standard 4 pots from the Godspeed conversion so i cant see why not as long as they use the same fixing points i cant see any reason why the face the hole is 'tapped' will cause an issue.

 

yes you can go back to the Subaru or STi brembo's as on those calipers , its the calipers that are threaded so the bolts go through the threaded hole in the hub

 

What they said.

On a slightly different topic
You will need wheel spacers or STi7~8 compatible wheels to cover the brakes

http://jollygreenmonster.fotopic.net/p1230617.html

Simon
Simon

 

OK thanks,

I was just concerned that I wouldnt be able to change my brakes without changing the hubs.

To help me out, so the 4 pots come off and the brembos bolt right back in place of them using either the bolts supplied with the godspeeds or the brembo kits.
or
do i need to get a set of OE bolts that hold the OE 4 pots in place on the hub.

Thanks and sorry for being dumb!

Ricey

 

If this is any help the thread on the brembo calipers are 12 x 1.5