Please can someone tell me HOW to adjust the front camber on my MY00.

Thank you.

Daniel

 

Unless you have the right instruments to set both the fronts to the correct settings you cannot get this accurate.
But:
Jack up car (etc)
With wheels off, find the 2 large bolts on the strut that bolt through the hub
One of them is eccentric and has graduations marked on the head (as a guide)
Slacken loose both bolts to allow the graduated head to rotate. If you move it with a spanner you will see the hub moving in an arc pivoting about the other bolt in the hub.
Once you have the right setting, tighten both bolts back up VERY tight.

These stock bolts do not allow a lot of adjustment, so don't ecpect to get 2 deg negative camber too easy!

911

 

Thank you. I'm only playing at the moment, feeling all the changes that can be made. I know the basic setup if straight, so I am adjusting from there.

Thanks

Dan

 

It might help you if you visit www.whiteline.com.au They have a huge amount of info to help you on the car, from mild to wild.
I'm at the wild end now and the change is very dramatic, but you have to compromise to get there.
911