i need the fitting instructions for morette conversion for a MY01 bugeye i have changed them over but seem to be only getting main beam need help fast thx

Relay wiring as follows:
Terminal 30: from battery via fuse, (unless there's one on the relay.
Terminal 85: from headlight main beam, usually via Scotchlok
Terminal 86: to a good earth, battery -ve will do.
Terminal 87: feeds the inner/main beam only lights.
Alcazar

Cheers alcazar all is fine now ....


apart from the offside sidelight wont work and ive put the spare bulbs in out of my spare headlights and it still doesnt work ..

also whats the bulb for behind the covering between the lights ??

ok also noticed when i put main beam on the drivers side dip beam goes out but the passenger side stays on ??

Is the driver's side a twin filament bulb? Could that filament be faulty?
As regards sidelights, have you checked that you have power to the relevant sidelight? And earth continuity?
Alcazar

alcazar can i ring you tomorrow , send me your number by email if thats ok ?

im a little stuck

many thx

[Edited by Chris G - 5/20/2003 9:53:01 PM]