362x32mm AP Brake Disc replacement
#1
Scooby Newbie
Thread Starter
Join Date: Dec 2015
Location: Devon
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
362x32mm AP Brake Disc replacement
OK, got a good answer on my clutch, so here goes on the brakes.
My WRX wagon 2003, has 6 pot AP Racing big brakes on the front. The discs are worn and need replacing, but very few of my searches seem to come up with the 362mm O/D that my 2 piece discs are. The original kit was supplied by Graham Goode about 11 years ago, to the original owner, who passed on a file full of invoices, but I see no evidence of the discs ever being replaced. (Just pads)
The calipers are CP7040 I think and there have been replacement pads, Ferodo DS2500 54mm, sourced from Godspeed.
My question is, should I go to Reyland Motorsport, who appear to be able to offer a direct replacement, pattern part for the AP rotors, for £310.00 the pair?
Or, should I look elsewhere? Does anyone else have exactly the same rotors, which will only fit inside 18" wheels, I believe?
Wheels are Revolution made copies of Prodrive PFF7s. Brake rotors are 362mm x 32mm wide and have 12 bolt holes on 8.5" PCD to fit them to the bells and pad depth seems to be about 55mm.
I need to get this right, because for this 362x32mm combo, Reyland offer two different PCDs for the bolt holes and three different pad depths and all that with two groove styles, or no grooves.
Any advice please?
My WRX wagon 2003, has 6 pot AP Racing big brakes on the front. The discs are worn and need replacing, but very few of my searches seem to come up with the 362mm O/D that my 2 piece discs are. The original kit was supplied by Graham Goode about 11 years ago, to the original owner, who passed on a file full of invoices, but I see no evidence of the discs ever being replaced. (Just pads)
The calipers are CP7040 I think and there have been replacement pads, Ferodo DS2500 54mm, sourced from Godspeed.
My question is, should I go to Reyland Motorsport, who appear to be able to offer a direct replacement, pattern part for the AP rotors, for £310.00 the pair?
Or, should I look elsewhere? Does anyone else have exactly the same rotors, which will only fit inside 18" wheels, I believe?
Wheels are Revolution made copies of Prodrive PFF7s. Brake rotors are 362mm x 32mm wide and have 12 bolt holes on 8.5" PCD to fit them to the bells and pad depth seems to be about 55mm.
I need to get this right, because for this 362x32mm combo, Reyland offer two different PCDs for the bolt holes and three different pad depths and all that with two groove styles, or no grooves.
Any advice please?
#4
Scooby Newbie
Thread Starter
Join Date: Dec 2015
Location: Devon
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts