6 Speed boxes without speedo drive ? No problem!
11 October 2012, 02:49 PM
#1
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
6 Speed boxes without speedo drive ? No problem!
API Impreza
3 & 4 Churchlands Farm Ind. Est.
Bascote Road
Harbury
Warwickshire
CV33 9PL England
Phone 44 [0] 1926 614333
Fax 44 [0] 1926 614907
www.apiengines.com/index3.php
dob@apiengines.com
Hi gents,
An update; we have successfully converted late type 6 speed gearbox bellhousings from non speedo [ Hatch onwards + Legacy ] to speedo drive type. We have done this before, but sadly the engineer that was doing them died and we have struggled to find an engineering shop that can handle it. [ at an economic cost ]
This entails a fair amount of machining after a jig has been made, as the speedo driven gear locating hole is a complex shape that works through two different angles.
Plus there is an angled oil feed hole that needs to be bored also.
Working with your original clutch housing, we can convert them at a cost of £200.00 + carriage and VAT,
Turnaround time, ideally in batches of 2 or more, [ to make set up time viable] will be 5 – 7 working days. Singles can be done if you are in a hurry, but will add £20.00 + VAT to the cost.
We can also supply the necessary speedo gear internal parts [ at extra cost ] that you will need, if you wish. The original external speedo sender fits, whether it is plastic type or alloy type, they are all the same, no matter 5 speed or 6 speed
Call if I can help.
David
3 & 4 Churchlands Farm Ind. Est.
Bascote Road
Harbury
Warwickshire
CV33 9PL England
Phone 44 [0] 1926 614333
Fax 44 [0] 1926 614907
www.apiengines.com/index3.php
dob@apiengines.com
Hi gents,
An update; we have successfully converted late type 6 speed gearbox bellhousings from non speedo [ Hatch onwards + Legacy ] to speedo drive type. We have done this before, but sadly the engineer that was doing them died and we have struggled to find an engineering shop that can handle it. [ at an economic cost ]
This entails a fair amount of machining after a jig has been made, as the speedo driven gear locating hole is a complex shape that works through two different angles.
Plus there is an angled oil feed hole that needs to be bored also.
Working with your original clutch housing, we can convert them at a cost of £200.00 + carriage and VAT,
Turnaround time, ideally in batches of 2 or more, [ to make set up time viable] will be 5 – 7 working days. Singles can be done if you are in a hurry, but will add £20.00 + VAT to the cost.
We can also supply the necessary speedo gear internal parts [ at extra cost ] that you will need, if you wish. The original external speedo sender fits, whether it is plastic type or alloy type, they are all the same, no matter 5 speed or 6 speed
Call if I can help.
David
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
