Anyone know these fixed Bilsteins for GC8?
#6
Scooby Regular
iTrader: (2)
The inserts on the Black ones do not look the same as the genuine Bilstein/Prodrives.
These use 40mm inserts and are whats classed as an inverted damper (the bumpstop is inside the bottom of the strut). They also have a large nut on the bottom allowing them to be stripped and re-built.
The Black ones look more like OE with billies stickers. Although difficult to tell from the pic, if the insert maybe slightly larger then OE, but not as large as the P'drive 40mm units.
40mm insert Vs OE insert
I had the Silver ones on my last classic. Although not badged 'Prodrive/STi' they were Bilsteins to the same spec. Had my own stickers made up though
These use 40mm inserts and are whats classed as an inverted damper (the bumpstop is inside the bottom of the strut). They also have a large nut on the bottom allowing them to be stripped and re-built.
The Black ones look more like OE with billies stickers. Although difficult to tell from the pic, if the insert maybe slightly larger then OE, but not as large as the P'drive 40mm units.
40mm insert Vs OE insert
I had the Silver ones on my last classic. Although not badged 'Prodrive/STi' they were Bilsteins to the same spec. Had my own stickers made up though
Last edited by Scott.T; 21 December 2011 at 08:26 AM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM