Am i right in thinking that if i fit adjustable front strut mounts i would be able to remove the camber bolts from the front and use them in the rear as the camber can be achived via the mounts...??
Hope that makes sense
Oh by the way its for a my00 classic if it makes any difference.

Cheers

 

Yes you can do all that.
Much depends on the top mount's range of adjustment, but if they are Noltec then you certainly can do as you say.

 

How about the Teins....?

 

I think 9do not actually know) that the Tien top mounts are for camber only, but i do not know the range of adjustment available.

It is very likely you will be ok.

You will need the stock camber bolts in the front be ok.