Camber
#1
Scooby Regular
Thread Starter
Join Date: May 2018
Location: Newtownards - Northern Ireland
Posts: 387
Likes: 0
Received 2 Likes
on
2 Posts
Camber
Anyone give good recommendations for camber on front and rear for 2006 wrx sti
had eibach pro street s coilovers installed with front whitrline top mounts
I've also a set of rear camber bolts to be fitted. Unfortunately no1 close who's good with camber setups locally so will get wheel alignment done first before the new year then get it book into Ali burrows for the camber
had eibach pro street s coilovers installed with front whitrline top mounts
I've also a set of rear camber bolts to be fitted. Unfortunately no1 close who's good with camber setups locally so will get wheel alignment done first before the new year then get it book into Ali burrows for the camber
#2
Scooby Regular
iTrader: (3)
neg 2 deg front. If you get any uneven tyre wear reduce to neg 1 deg 45 mins (you may need to rotate the offset Whiteline top mounts to the max caster/minimum camber position).
neg 1 deg rear. Rather than use rear camber bolts, you can torque the rear lower struts bolts, with the suspension at full droop - that will minimise the rear camber.
neg 1 deg rear. Rather than use rear camber bolts, you can torque the rear lower struts bolts, with the suspension at full droop - that will minimise the rear camber.
Last edited by 2pot; 15 December 2018 at 11:57 AM.
Thread
Thread Starter
Forum
Replies
Last Post
hibbs
General Technical
3
21 August 2012 10:33 PM
-=uk99=-
Suspension
1
24 April 2003 10:52 PM