Carbon Defi style newage 60mm gauge pod- flocked
#1
Carbon Defi style newage 60mm gauge pod- flocked
As above guys.
Removed from my STI. Houses 3x 60mm gauges. Carbon fibre Defi style hooded gauge pod. Flocked in black. Could do with re flocking or perfectly useable as is, I'm just fussy. Or rub it back to bare carbon and re lacquer if you prefer, up to you
I've strengthened this one with an ally plate so it doesn't crack like others out there.
£50
Removed from my STI. Houses 3x 60mm gauges. Carbon fibre Defi style hooded gauge pod. Flocked in black. Could do with re flocking or perfectly useable as is, I'm just fussy. Or rub it back to bare carbon and re lacquer if you prefer, up to you
I've strengthened this one with an ally plate so it doesn't crack like others out there.
£50
#4
Vicks yes it does.
Dan, clips at the back and zip ties at the front. Through the OEM holes. It fits much more securely this way and is far more solid than the carbon clips they usually come with.
It fits very well and only swapping due to a change of dash setup.
If Vicks doesn't have it you can look on Saturday.
Dan, clips at the back and zip ties at the front. Through the OEM holes. It fits much more securely this way and is far more solid than the carbon clips they usually come with.
It fits very well and only swapping due to a change of dash setup.
If Vicks doesn't have it you can look on Saturday.
#6
Hi mate I see you're in Cumbria so will want this posting. Please add an additional £5 to cover postage and packing and I'll get it boxed up this week.
Please send £55 via Paypal Gift to frayz@frayz-engineering.com
Many thanks
Frayz.
Please send £55 via Paypal Gift to frayz@frayz-engineering.com
Many thanks
Frayz.
Last edited by frayz; 08 July 2012 at 07:32 PM.
Trending Topics
#11
Pop the heater vents out mate.
Pull the stereo surround out, just clips.
Pop open the drinks holder and remove 2x screws.
Pull the drinks holder and the centre vent out and you can get to the zip ties through the front clock mount holes.
Once pulled tight the pod is really nice and secure.
Pull the stereo surround out, just clips.
Pop open the drinks holder and remove 2x screws.
Pull the drinks holder and the centre vent out and you can get to the zip ties through the front clock mount holes.
Once pulled tight the pod is really nice and secure.
Thread
Thread Starter
Forum
Replies
Last Post