3D Printed Fuel Filler Cap Holder
#1
3D Printed Fuel Filler Cap Holder
Originally posted here: https://www.scoobynet.com/general-te...ge-models.html
3D Printed Fuel filler filler cap holder for various Subaru models. This prevents the filler cap from sitting against the dirty wheel arch when you fill up with scooby snax.... Completely self contained item, fitment is easy, simply push in to the fuel filler flap, no bonding or additional fixings required.
They are made from 3D printed PETG material for increased durability.
Fitment:
- Confirmed: Newage Impreza saloon and wagon(*)
- Confirmed: Forester sti models
- Confirmed: SG Forester XT 05
- presumed to fit other models also
Simply pushes in-between the inner and outer panels as per the below image.
Options:
- slimline = £5 delivered to UK, gifted on paypal
- normal = £8.50 delivered to UK, gifted on paypal
- With wording* = £12 delivered to UK, gifted on paypal
All work fine, the cost difference is a little material but mostly Royal Mail postage
*with "Scoobs" or any other short wording embossed inside, PM me to see what can fit
Colours:
Currently I only have black PETG filament, but there are many other colours of filament available. PM and we can negotiate a price.
PM me to order!
(* please advise when ordering)
------------------------------------------
Fitment and original condition:
Narrow:
Normal:
Normal with wording / logo:
3D Printed Fuel filler filler cap holder for various Subaru models. This prevents the filler cap from sitting against the dirty wheel arch when you fill up with scooby snax.... Completely self contained item, fitment is easy, simply push in to the fuel filler flap, no bonding or additional fixings required.
They are made from 3D printed PETG material for increased durability.
Fitment:
- Confirmed: Newage Impreza saloon and wagon(*)
- Confirmed: Forester sti models
- Confirmed: SG Forester XT 05
- presumed to fit other models also
Simply pushes in-between the inner and outer panels as per the below image.
Options:
- slimline = £5 delivered to UK, gifted on paypal
- normal = £8.50 delivered to UK, gifted on paypal
- With wording* = £12 delivered to UK, gifted on paypal
All work fine, the cost difference is a little material but mostly Royal Mail postage
*with "Scoobs" or any other short wording embossed inside, PM me to see what can fit
Colours:
Currently I only have black PETG filament, but there are many other colours of filament available. PM and we can negotiate a price.
PM me to order!
(* please advise when ordering)
------------------------------------------
Fitment and original condition:
Narrow:
Normal:
Normal with wording / logo:
Last edited by Bazil_SW; 16 October 2018 at 09:36 PM.
#2
Due to a filament ordering error these are now also available in "Smokey black", which is a sort of semi transparent black colour so light partially shines through it.
Same price as above.
Drop me a PM!
Same price as above.
Drop me a PM!
Last edited by Bazil_SW; 13 February 2018 at 05:45 PM.
Trending Topics
#16
Scooby Regular
#18
These are now available in Pinky/red and various others colours as well as with logos, so far:
STi - see below photo
STi Type RA - not printed yet, but cad images below
STi Type UK - see below photo
STi Spec C - not printed yet, but cad images below
WRX - not printed yet, but cad images below
Prodrive - not printed yet, but cad images below
Subaru Stars - not printed yet, but cad images below
Other logos also possible, with logos are £12 delivered. PM if interested!
STi - see below photo
STi Type RA - not printed yet, but cad images below
STi Type UK - see below photo
STi Spec C - not printed yet, but cad images below
WRX - not printed yet, but cad images below
Prodrive - not printed yet, but cad images below
Subaru Stars - not printed yet, but cad images below
Other logos also possible, with logos are £12 delivered. PM if interested!
#21
If you do want to measure I'd expect the structure of the fuel flap to be the same/similar, then I think I need:
- panel gap between inner and outer panel
- width and height of the inner panel aperture
- distance from the top of the filler cap grab part to the outer skin of the car (for clearence when the flap is shut)
Having said all of that, I wouldn't be surprised if they were the same or very similar!
#22
Scooby Regular
iTrader: (13)
Yeah, those were all the dimensions I was thinking of!
Plus the diameter, and depth of the filter cap's thread.
However, seeing how cheap they are, I might simply 'take a chance' on the Fozzie pattern one, based on your info.
Can you print one in BLACK, with the
" STi " logo?
Plus the diameter, and depth of the filter cap's thread.
However, seeing how cheap they are, I might simply 'take a chance' on the Fozzie pattern one, based on your info.
Can you print one in BLACK, with the
" STi " logo?
Last edited by joz8968; 17 March 2018 at 02:32 PM.
#26
Scooby Regular
These are now available in Pinky/red and various others colours as well as with logos, so far:
STi - see below photo
STi Type RA - not printed yet, but cad images below
STi Type UK - see below photo
STi Spec C - not printed yet, but cad images below
WRX - not printed yet, but cad images below
Prodrive - not printed yet, but cad images below
Subaru Stars - not printed yet, but cad images below
Other logos also possible, with logos are £12 delivered. PM if interested!
STi - see below photo
STi Type RA - not printed yet, but cad images below
STi Type UK - see below photo
STi Spec C - not printed yet, but cad images below
WRX - not printed yet, but cad images below
Prodrive - not printed yet, but cad images below
Subaru Stars - not printed yet, but cad images below
Other logos also possible, with logos are £12 delivered. PM if interested!
If yes I’ll have one please in that red looks mint
I’ll pass the black one on to my little bro