Rbon91

iTrader: (6)

so it is with great regret and sadness I am putting the feelers out for my blob sti project..


on mapping last week the tuebo failed and I am at a point now were I need to cut my losses and move on.. all it needs is a new turbo and will be at full running power 550/550 estimated on vpower..


please see link below for my project and see below spec sheet of the car..


I unfortunately don't have the time or space to break the car myself so that isn't a option.


the only thing I will be keeping from the car is the 2 front sparco seats..


the car itself has only done 34,000 miles from new and is a 55 plate


new engine has done less than 1000miles
ENGINE


EJ22 block
Block bored and faces skimmed
Rear thrust conversion
Acl main bearings (race series)
Mahle motorsport big end bearings
Ej257 heat treated crank
11 oil pump
Crower rods
Crower bolts
Ceramic omega pistons
New crank seals
14mm head stud conversion
AS Performance twinscroll baffled sump
SPEC C Big port heads ported and polished





Bosche 1000cc injectors
CDF fuel rails
Fuel pressure reg
Braided fuel lines
Sytec fuel filter
External bosche 044
Swirl POT
3 port boost solenoid*
Spec c inlet manifold
HDI GT2 FMIC with reverse inlet custom pipework*
Electric power steering conversion*
Custom twinscroll headers and up pipe heat wrapped*
Custom Vband rotated downpipe
TOMEI Titanium 3 inch cat back statement*
Borg Warner EFR 7064 twinscroll turbo with turbo smart actuator
K&N large cone filter
Custom Nissan pulsar modified radiator
Large 19row oil cooler
ACT 6 puk paddle clutch with lightened flywheel
Battery to boot relocation*
RCM return to sump catch can


Perrin 4 bar map sensor


Wideband sensor


Syveccs ECU





SUSPENSIONAND HANDLING


Full space frame front end custom made
D2 8Pot 356mm disks with ds2500 pads
Rear Brembos with ds2500 pads
HEL braided brake lines
24mm Whiteline front adjustable arb*
24mm Whiteline rear adjustable arb
Front Whiteline adjustable droplinks*
Rear Whiteline adjustable droplinks*
Spec c front arms custom caster mod and poly bushed
Spec c rear arms poly bushed
BC Coilovers with camber and caster plates
Beatrush front strut brace
Beatrush rear strut brace
Beatrush rear boot H frame
Beatrush rear passenger well braces
Beatrush rear different support*
Beatrush solid engine mounts
Beatrush gearbox bushes and mounts
Beatrush Dog bone*
Braided fuel lines*
Vortex rear full carbon spoiler





INTERIOR


Syveccs ecu
Defi gauges with controller
Full custom space frame front end
Sparco pro 2000 bucket seats
Takanta harnesses
Prodrive steering wheel boss (very rare)
Sparco steering wheel
Spec c black carpet
Spec c black door cards
Lifeline plumbed in fire extinguisher





WHEELSAND TYRES


ABW arches
XXR 530 18x9.75*
AD08R 265/35/18 tyres

Engine, gearbox and diffs all run with Royal Purple oil


https://www.scoobynet.com/972968-200...roject-14.html


I have a idea what I want for the car after some quotations off breakers.. so please PM me if you are interested or txt 07940737733


thanks ryan

BrownPantsRacing

iTrader: (6)

Don't do it!!!!!!!!!!

Rbon91

iTrader: (6)

If I can get what I want for it mate it's time to move on..

I'm not in the financial position to be spending anymore money on it now unfortunately

Ryan

Rbon91

iTrader: (6)

Had a lot of calls and texts already...

If I don't get what the car is worth will go into storage for a while so please be sensible with your offers... go build sontbubg to a spec like this is over 30k... now I know I'm not going to get that obviously... but offers like 10k don't bother


Thanks
Ryan

RAGGY DOO

iTrader: (1)

What a crying shame bud
Lash a new turbo on there get it mapped up drive it for a month and see how you feel

Rbon91

iTrader: (6)

Wish it was simple as that.. I'm not in the position to spend money on new turbo and mapping again mate..

RAGGY DOO

iTrader: (1)

I'd lock it away until you are bud go on holiday visit a ***** house what ever you need to clear the head save up for turbo and look at things again in few months
Good luck what ever you decide to do

Peedee

iTrader: (4)

Need to put a price mate. Forum rules and all that.

Rbon91

iTrader: (6)

Hahaha yeah week or so in a house full of cocaine and booked come back a better man 😂

Rbon91

iTrader: (6)

Price wise well it's a 30k+ build... so anything to
Reflect that I guess... don't want to put sontbubg to low or to high

Peedee

iTrader: (4)

Just put a price or 'offers in the region of......' or something. It's saves people offering you stupid amounts or "I'll swap for my 280bhp Astra VXR" or whatever.

scoobyboy1

iTrader: (16)

Stunning car and so much hard work gone into it, shame you have to part with it!!

I think your better off breaking it for parts unfortunately, not many people out there who are willing to part with anymore then £20k for a Subaru, everyone knows the amount of money that it cost to get it to this spec but all your going to get are chancers and dreamers!!!

Good luck with what ever route you go down!!!

Rbon91

iTrader: (6)

Breaking it would be best for myself I know but I don't have the time or space to break it unfortunately. Along with posting everything etc..

Price is 16k on the car as it is now.

Delivery can be arranged also.

Ryan

BrownPantsRacing

iTrader: (6)

Bargain!

Rbon91

iTrader: (6)

Cheers pal

Jay Cartay

iTrader: (3)

Christ. I'm trying to build something like this, bit by bit. I can say from my own experience that this is the bargain of the century and I'd have it in seconds if I could!

Rbon91

iTrader: (6)

there is always the option of a bank loan

Rbon91

iTrader: (6)

A full inspection of the engine has been carried out this morning,


leak down test carried out and all fine as well as the oil dropped and filtered.


Cheers ryan

Rbon91

iTrader: (6)

SOLD SOLD SOLD

BrownPantsRacing

iTrader: (6)

Not surprised.

RAGGY DOO

iTrader: (1)

Car broke your heart bud what's next

Rbon91

iTrader: (6)

C63 AMG 2012 Coupe


Ryan

scoobyboy1

iTrader: (16)

Good choice!!!

Rbon91

iTrader: (6)

Found one that I want...

It's 235 miles away in Portsmouth so looking at a 10hour day to get it.. Don't mind traveling fir the rite car tho.. we shall see

Ryan

alex_00s

iTrader: (18)

followed this build and was dribbling the entire time...

amazing build and worth every penny!!

Rbon91

iTrader: (6)

its gone to the breakers now unfortunately.


didn't get what I really wanted for it but its a buyers market and time to move on to the next motor.


Ryan

Dave Y

iTrader: (52)

That's a pity

Juno

Who's breaking

Rbon91

iTrader: (6)

For anyone wanting to know who's breaking had 82638467373 messages


Mark James and Robert Crossland will be breaking it from later this week.. found o the normal FB subaru pages

Juno

Have you got a link useless at facebook and 100's of pages