Does the STI boot spoiler use the existing WRX spoiler holes on a newage?
#1
Does the STI boot spoiler use the existing WRX spoiler holes on a newage?
Out of interest, as per title. Considering whether to put an STI wing on my WRX. Wondered if I need to have a boot lid modified, or if a genuine STI wing will bolt straight onto existing lid without redrilling etc?
#3
Scooby Regular
take shrekstas advice best bet around £300ish posted
#4
Scooby Regular
It uses the existing 4 holes plus you need to drill another 8
#6
Scooby Regular
iTrader: (6)
Yes just this.
I used the 4 existing holes that did match up, drilled the other ones that are under the WRX spoiler footprint in my WRX bootlid so that if required I could go back to the WRX spoiler, which I did when I sold the car. I held my STI spoiler down with sections of very strong double sided padded sticky tape in the middle and the 6 mounting bolts. It was rock solid, no issues at all.
I used the 4 existing holes that did match up, drilled the other ones that are under the WRX spoiler footprint in my WRX bootlid so that if required I could go back to the WRX spoiler, which I did when I sold the car. I held my STI spoiler down with sections of very strong double sided padded sticky tape in the middle and the 6 mounting bolts. It was rock solid, no issues at all.
#7
Hi, bumping this thread since i have a similar question.
I own a 2000 GC8 Impreza GT and have a STI wing that I want to use, I did however not recieve the extra bolts for the STI wing so im stuck with my 4 original bolts on the GT wing.
Are the additional 8 bolts the exact same bolts as those 4 in use currently? The dealers in my area cannot for some reason find out what bolts are used on the STI wing (probably cause it was never sold in the rest of Europe) so they cant even order them for me :/
I own a 2000 GC8 Impreza GT and have a STI wing that I want to use, I did however not recieve the extra bolts for the STI wing so im stuck with my 4 original bolts on the GT wing.
Are the additional 8 bolts the exact same bolts as those 4 in use currently? The dealers in my area cannot for some reason find out what bolts are used on the STI wing (probably cause it was never sold in the rest of Europe) so they cant even order them for me :/
Trending Topics
#11
Scooby Regular
Just for completeness.........and assuming this is the type of spoiler we are talking about
Ref 96081A above - "Slider bolt, Spoiler" part number 96055FA280 Qty:10 off
Ref N370016 above - "Flange nut" part number 902370016 Qty: 10 off
or have you a 22B version??
Ref 96081A above - "Slider bolt, Spoiler" part number 96055FA280 Qty:10 off
Ref N370016 above - "Flange nut" part number 902370016 Qty: 10 off
or have you a 22B version??
Last edited by Don Clark; 13 March 2019 at 06:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
stirls666
Subaru Parts
7
20 May 2011 12:38 PM
wildfire
Styling
6
12 March 2008 06:08 PM
iggy
General Technical
3
03 September 2003 08:31 PM