Ninja 2 exhaust
#1
Scooby Newbie
Thread Starter
Join Date: Feb 2017
Location: Leicestershire
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Ninja 2 exhaust
hi,
bought this ninja 2 (2.5 bore) exhaust backbox off ebay for my 04 wrx blob. Just a few questions, as im a total beginner.
1. Should i also get the centre pipe without a resonator? More power and better sound??
if so which one?
2. What type of flanges and bolts should i get?
3. Should i get someone else to install? Or is it a quick bolt on, axle stands, sockets..and some wd40...?
thanks
bought this ninja 2 (2.5 bore) exhaust backbox off ebay for my 04 wrx blob. Just a few questions, as im a total beginner.
1. Should i also get the centre pipe without a resonator? More power and better sound??
if so which one?
2. What type of flanges and bolts should i get?
3. Should i get someone else to install? Or is it a quick bolt on, axle stands, sockets..and some wd40...?
thanks
#3
Just fitted my ninja 2 back box , takes about 1/2 hour from getting the car on ramps to taking it off ramps , tools needed are socket set , flat head screw driver for prizing the rubber hangers off the the backbox , gasket , 2 bolts and nuts and a bit of washing up liquid to help get the rubbers back onto the backbox , didn't have a new gasket so used some blue lite silicon gasket maker I had laying about , works great no blowing ,
Last edited by drfeelgood; 28 February 2017 at 07:29 PM.