laserline alarm
22 June 2004, 01:31 PM
#1
Scooby Regular
Thread Starter
laserline alarm
Hi all, I have a laserline alarm on my car, for some reason when I press the arm button the lights flash and the car locks but the alarm makes no noise.
This has happened before and it bugs the life outa me. Is there a way of getting the beeps back :P ?
thanks
This has happened before and it bugs the life outa me. Is there a way of getting the beeps back :P ?
thanks
23 June 2004, 10:16 AM
#2
Scooby Regular
Join Date: Mar 2004
Location: N/A
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
There is a way to do this with the 996V3. Unfortunately, it doesn't work on the 996 - I've been trying to turn off the beeping without luck 
Drop laserline an email (info@laserlinedirect.com) and ask them to send you a copy of the manual for your system. They sent me a copy of the 996V3 manual, but I don't have it to hand to copy the bit about enabling/disabling the beeps.
Will try to remember to post the info later on.
Drop laserline an email (info@laserlinedirect.com) and ask them to send you a copy of the manual for your system. They sent me a copy of the 996V3 manual, but I don't have it to hand to copy the bit about enabling/disabling the beeps.
Will try to remember to post the info later on.
23 June 2004, 09:57 PM
#4
Scooby Regular
Join Date: Mar 2004
Location: N/A
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
TO ENABLE/DISABLE AUDIBLE CONFIRMATION TONES
With the alarm system disarmed, enter the vehicle and close all doors/bonnet. Turn on the
vehicle ignition, open the driver’s door, then press the arm/disarm button on the remote
control and look for the following confirmation:
Enabled = The dash fascia LED will flash once accompanied by a short tone from the siren.
Disabled = The dash fascia LED will flash twice without a siren tone.
Turn off the vehicle ignition, close all doors and arm the alarm in the usual way.
With the alarm system disarmed, enter the vehicle and close all doors/bonnet. Turn on the
vehicle ignition, open the driver’s door, then press the arm/disarm button on the remote
control and look for the following confirmation:
Enabled = The dash fascia LED will flash once accompanied by a short tone from the siren.
Disabled = The dash fascia LED will flash twice without a siren tone.
Turn off the vehicle ignition, close all doors and arm the alarm in the usual way.
Trending Topics
03 March 2018, 06:26 PM
#8
Scooby Newbie
Join Date: Feb 2018
Location: Distington Cumbria
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
no sound laser line, mine is the same and the siren is kput and I cant find another any were
03 March 2018, 08:59 PM
#9
Scooby Regular
I thought it was illegal in the uk to have the alarm make a noise when arming and disarming.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
toyney83
General Technical
10
02 October 2015 08:38 PM
