Subaru paint finish
#6
Scooby Regular
iTrader: (1)
Very soft and the new Ones are even softer
Autoglmn super resin polish is fine after claying of course
Then top it up with egp to seal it
Hd wax is good
I personally use chemical guys products
50/50 paste followed by 2 coats of backlight then V7 to seal it
£80 should get you going on this little lot and easy to put on too
Autoglmn super resin polish is fine after claying of course
Then top it up with egp to seal it
Hd wax is good
I personally use chemical guys products
50/50 paste followed by 2 coats of backlight then V7 to seal it
£80 should get you going on this little lot and easy to put on too
#7
Scooby Regular
iTrader: (1)
Very soft and the new Ones are even softer
Autoglmn super resin polish is fine after claying of course
Then top it up with egp to seal it
Hd wax is good
I personally use chemical guys products
50/50 paste followed by 2 coats of backlight then V7 to seal it
£80 should get you going on this little lot and easy to put on too
Autoglmn super resin polish is fine after claying of course
Then top it up with egp to seal it
Hd wax is good
I personally use chemical guys products
50/50 paste followed by 2 coats of backlight then V7 to seal it
£80 should get you going on this little lot and easy to put on too
Trending Topics
#9
Very soft and the new Ones are even softer
Autoglmn super resin polish is fine after claying of course
Then top it up with egp to seal it
Hd wax is good
I personally use chemical guys products
50/50 paste followed by 2 coats of backlight then V7 to seal it
£80 should get you going on this little lot and easy to put on too
Autoglmn super resin polish is fine after claying of course
Then top it up with egp to seal it
Hd wax is good
I personally use chemical guys products
50/50 paste followed by 2 coats of backlight then V7 to seal it
£80 should get you going on this little lot and easy to put on too
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM