Notices
ScoobyNet General General Subaru Discussion

Impreza etc 1996 Jdm running lumpy and dying when pressing accelerator Help Please

Old 11 November 2018, 05:24 PM
  #1  
Oricle1
Scooby Newbie
Thread Starter
 
Oricle1's Avatar
 
Join Date: Jan 2016
Location: Lancashire
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Impreza etc 1996 Jdm running lumpy and dying when pressing accelerator Help Please

Hi guys, I’ve owned a Subaru Impreza etc 1996 jdm now for around a yr, and last week the temperature dial dropped to 0 and the car started bogging and trying to cut out, when I press the accelerator peddle it sounds like it is going to die and smells of fuel, I’ve tried cleaning throttle body I’ve fit a new TPS and set to right voltage and it’s still doing it, it tries to backfire upon open throttle now and again, if I drive it the car hesitates, I bought the car and it was fine, it’s had a lot of modifications and has lots of wiring and I don’t seem to find an obd socket, I’ve tried connecting the 2 trouble code connectors together and there’s no flashing lights I’m really struggling with her now if you could please advice me cheers Chris
Old 11 November 2018, 05:25 PM
  #2  
Oricle1
Scooby Newbie
Thread Starter
 
Oricle1's Avatar
 
Join Date: Jan 2016
Location: Lancashire
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Wrx not etc lol
Old 11 November 2018, 05:37 PM
  #3  
Vxr2010
Scooby Regular
 
Vxr2010's Avatar
 
Join Date: Oct 2015
Location: Herts
Posts: 2,305
Received 270 Likes on 234 Posts
Default

the fact you say the temperature sensor i assume you mean the coolant one on the dash is at 0 then i’m thinking the engine temperature sensor , it thinks it’s cold all the time so over fuelling , mafs can be an issue but are relatively cheap , other outside possibility but less likely is cam or crank sensor
Old 11 November 2018, 06:48 PM
  #4  
Oricle1
Scooby Newbie
Thread Starter
 
Oricle1's Avatar
 
Join Date: Jan 2016
Location: Lancashire
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Reply

Hi cheers for that I will try that I changed the thermostat thinking that was it so makes sense with the fuel smell thanks I will let you know 👍
Old 11 November 2018, 07:01 PM
  #5  
1509joe
Scooby Regular
iTrader: (2)
 
1509joe's Avatar
 
Join Date: Jan 2009
Location: Not sure
Posts: 3,293
Received 278 Likes on 248 Posts
Default

Sounds like your cts is shot but I'm pretty sure yours has two sensors one for the gauge and one for the engine management. Look under the manifold at the crossover pipe and see is there two sensors or one. If theres one I would say you need a new cts if two its just the one for the gauge you need and in theory shouldn't bother the way it runs.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scooby715
General Technical
0
11 May 2009 06:22 PM
ian.b
General Technical
0
17 January 2009 02:06 PM
loony toon
General Technical
1
09 December 2007 10:55 PM
trickywickywoo
General Technical
18
02 November 2006 06:11 PM
davecoombs
General Technical
6
12 April 2002 12:26 PM


Thread Tools
Search this Thread
Quick Reply: Impreza etc 1996 Jdm running lumpy and dying when pressing accelerator Help Please



All times are GMT +1. The time now is 08:42 AM.