seanvx

All fuses and earths off starter and tried it with just ignition on and trying to start it and it never changed stayed at 0.02v

1509joe

iTrader: (2)

Don have tried to explain what to do to the op at the start of the thread but he doesn't seem to grasp what people are saying to him. Its a very simple process

Don Clark

Is that with the clutch pedal depressed??

seanvx

Yep with clutch down as normal

Don Clark

Then it would seem either, there is no supply from the ignition switch in the start position, the clutch switch is not making when clutch pedal depressed (normally open contact) or you have some other break in the supply (starter interlock relay - if fitted, or alarm/immobiliser??)

seanvx

Ok thanks Don I did bypass the clutch switch with bit wire and 2 spade connectors and it was still the same

Henrik

iTrader: (5)

Random thought: is the clutch switch open with clutch pedal up or with it down?

What happens if you just disconnect the cables to the switch fully and leave them unconnected?