Wiring up a boost gauge
#1
Scooby Regular
Thread Starter
Join Date: Dec 2017
Location: Scotiand
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Wiring up a boost gauge
As above,
I have a new electronic boost gauge with boost sensor.
I have T in the boost pipe in the correct place.
Boost gauge has - RED/YELLOW.WHITE/BLACK
Boost sensor - RED/BLACK/WHITE
White is the signal wire
Red - Live
Black - Earth
Yellow to lights
Anyway what way do I wire it up, I did it years ago on my old Impreza but cannot remember for the life of me.
I'm unsure where to put the signal wire on the boost sensor
Any help would be great
I have a new electronic boost gauge with boost sensor.
I have T in the boost pipe in the correct place.
Boost gauge has - RED/YELLOW.WHITE/BLACK
Boost sensor - RED/BLACK/WHITE
White is the signal wire
Red - Live
Black - Earth
Yellow to lights
Anyway what way do I wire it up, I did it years ago on my old Impreza but cannot remember for the life of me.
I'm unsure where to put the signal wire on the boost sensor
Any help would be great
#2
Scooby Regular
Thread Starter
Join Date: Dec 2017
Location: Scotiand
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
I should add
I've taken the live off the stereo
Yellow - Off the stereo
Black off the stereo
White? Wasn't sure
Then the wires going to the boost sensor I have RED/BLACK
Boost sensor - RED/WHITE/BLACK
So wasn't sure how that works/?
I've taken the live off the stereo
Yellow - Off the stereo
Black off the stereo
White? Wasn't sure
Then the wires going to the boost sensor I have RED/BLACK
Boost sensor - RED/WHITE/BLACK
So wasn't sure how that works/?
#5
What car and what boost gauge?
I used the dash clock for all the relevant wires, the gauge I purchased the boost sensor has a wiring look that plugs directly between the sensor and gauge so need to wire that in.
The only wiring I had to do was from the gauge to the loom.
I used the dash clock for all the relevant wires, the gauge I purchased the boost sensor has a wiring look that plugs directly between the sensor and gauge so need to wire that in.
The only wiring I had to do was from the gauge to the loom.
Thread
Thread Starter
Forum
Replies
Last Post
jaygsi
Subaru Parts
6
03 January 2013 10:27 PM
jaygsi
Subaru Parts
11
17 December 2012 11:41 AM