Notices
ScoobyNet General General Subaru Discussion

Hawkeye STI headgasket failure

Old 22 September 2017, 01:33 PM
  #1  
dorrah
Scooby Newbie
Thread Starter
 
dorrah's Avatar
 
Join Date: Sep 2008
Location: Norwich
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default Hawkeye STI headgasket failure

Hey,
So currently having headgasket issues and looking for a rebuild, any recomendations within the Norfolk area? I'm only looking for specilist engine builders, most of the ones I know of or have discovered are a good 150 miles away, so looking for local(ish) ones first however probabily have to suck it up and get the car transported to one of the more known ones.

Any ideas?

Thanks
Old 22 September 2017, 01:52 PM
  #2  
trevsjwood
Scooby Regular
iTrader: (2)
 
trevsjwood's Avatar
 
Join Date: Sep 2007
Location: Northampton
Posts: 1,655
Received 6 Likes on 5 Posts
Default

Paul Finch is in Northampton, (MOTORS S GT on here), also has a built sti 2.5 long engine in the Subaru parts forsale section at very reasonable money.
Can't recommend him highly enough.
Trev
Old 22 September 2017, 02:06 PM
  #3  
Cambs_Stuart
Scooby Regular
iTrader: (3)
 
Cambs_Stuart's Avatar
 
Join Date: Sep 2015
Location: Cambridge
Posts: 1,789
Received 3 Likes on 3 Posts
Default

Tim Farmer. I know I recommend him for everything but he is very good. He built a forged engine for a colleagues GB270 many miles ago and it's still going.
I think Hurst cars in Bedford and Buckingham Stanley in Cambridge also use him for engine builds (or re-builds).
Old 22 September 2017, 02:56 PM
  #4  
Tidgy
Scooby Regular
 
Tidgy's Avatar
 
Join Date: Sep 2004
Location: Notts
Posts: 23,118
Received 150 Likes on 115 Posts
Default

where ever you go make sure its a proper job (expect a bill of at least 3k+), will need a full strip down including bottom end.

Also while its apart its worth considering replacing the rods and pistons while your at it.
Old 23 September 2017, 06:04 PM
  #5  
spindle121
Scooby Regular
 
spindle121's Avatar
 
Join Date: Jan 2015
Location: North London
Posts: 423
Received 10 Likes on 10 Posts
Default

* Paul finch is your man just done a rebuild for me top job.*.
Old 24 September 2017, 12:13 PM
  #6  
Vxr2010
Scooby Regular
 
Vxr2010's Avatar
 
Join Date: Oct 2015
Location: Herts
Posts: 2,305
Received 270 Likes on 234 Posts
Default

definitely do the bottom end too they often fail after the hg go, arp head bolts are a must or it will go again , forged pistons very worth doing , rods wise unless you are looking for more power not that necessary , plus it's worth a drive or tow to go somewhere that knows what they are doing , i've head 3 rebuilds over the years and learnt what was worth doing
Old 25 September 2017, 01:27 PM
  #7  
dorrah
Scooby Newbie
Thread Starter
 
dorrah's Avatar
 
Join Date: Sep 2008
Location: Norwich
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for the input everyone, I knew you lot would help out.
Not looking forward to the bill but it is worth doing right.

Who is this Tim Farmer fellow I've seen a few posts about him but no other information?

Northampton is closer than any others I've found so looks like I'll be contacthing Paul Finch soon then.

Thanks again.
Old 25 September 2017, 01:46 PM
  #8  
Cambs_Stuart
Scooby Regular
iTrader: (3)
 
Cambs_Stuart's Avatar
 
Join Date: Sep 2015
Location: Cambridge
Posts: 1,789
Received 3 Likes on 3 Posts
Default

Tim is a mobile mechanic, but does everything from servicing to race builds. He is a one man outfit and has worked a lot with Zen and Hurst cars.
His online presence is rubbish, but you can call him on 07880 661866.
Old 26 September 2017, 01:10 PM
  #9  
dorrah
Scooby Newbie
Thread Starter
 
dorrah's Avatar
 
Join Date: Sep 2008
Location: Norwich
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

Cheers, in this day its odd to not have any online info about your company.
Then again with recomendations I guess he doesnt need it.


Thread Tools
Search this Thread

All times are GMT +1. The time now is 01:30 PM.